Ep Detect is an accelerometer based mobile phone application that uses advanced signal processing to detect epileptic seizures. It runs on most mobile phones that support SMS messaging, movement detection and GPS position location.
The addition of the seizure detection signal processing enables the phone to function as a wearable seizure detection system, with remote signalling to carers. Epdetect monitors the wearers movements, distinguishing between normal movement and movement associated with a Tonic–clonic seizure. If a seizure is detected, Epdetect will contact your carer with your status and GPS position.
Epdetect will monitor the movement of the person while the phone is in their pocket or worn on a belt. The software will differentiate the movements associated with epilepsy from normal movement.
When a seizure is detected it will warn the person that it is about to send an SMS message to a carer, in the case of a false alarm the person will be able to cancel the SMS alert. The SMS message contains time, GPS coordinates (if the phone has GPS) and a short message, allowing the carer to raise the alarm and take remedial action or call an ambulance. When the person recovers they press a button to cancel the alarm, which will initiate an end of emergency SMS message.
The Epdetect user interface screens:
* Status Message – A "Seizure Detected – press the clear button for 5 seconds to cancel" message will be displayed.
* Audible Alarm – An audible alarm will sound immediately upon detection of a seizure.
* Count Down Timer – A countdown from 30 seconds will be displayed to enable the user to press the cancel button prior to sending the outgoing SMS alert. The countdown timer is adjustable from 1- 60 seconds.
* Clear Button – A large "clear" button graphic is displayed to allow the user to clear the detector active status, which also cancels any outgoing SMS alert. The "clear" button must be pressed for 5 seconds within 30 seconds to prevent the outgoing SMS message.
Alarm Active Screen:
* Status Message – A "Seizure In Progress – press the cancel button for 5 seconds to signal the end of a seizure" message is displayed.
* Audible Alarm – A second audible alarm will continue to play until the alarm active status is cleared.
* Cancel Button – A large "cancel" button graphic is displayed to allow the user to clear the alarm status, which also causes an end of seizure SMS message to be sent. The "cancel" button must be pressed for 5 seconds to cancel the alarm active status.
* Additional Message – A message saying |This person may be having an epileptic fit" will be displayed on screen.
Advanced Options Screen:
* Back-Up Accelerometer Data – Tick box, which if ticked saves the raw accelerometer data that caused the last alarm condition to a file.
* GPS On/Off – Tick box, which if ticked activates the phone’s GPS to generate location information, which is appended to SMS messages.
* Carer No 1 – The mobile phone number of the first carer, this number will receive an SMS message if an alarm condition is active.
* Carer No 2 – Optional, the mobile phone number of the second carer, this number will receive an SMS message if an alarm condition is active.
* Carer No 3 – Optional, the mobile phone number of the third carer, this number will receive an SMS message if an alarm condition is active.
* Alarm Message – The SMS message that will be sent when an alarm is active.
* Cancel Alarm Message – The SMS message that will be sent when an alarm is cleared.
* Detector Active Sound – Selects the warning sound to play when the detector is active.
* Alarm Active Sound – Selects the sound to play when the alarm has not been cancelled (could be an audio file such as; "Help this person is having an epileptic seizure").
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional
Similar Software:
HearingFrequency HearingFrequency - HearingFrequency allows you to test a person's hearing frequency range. Place the headphones of the PocketPC on or near the person you are testing and adjust the frequency in HZ and tap the button to play the sound. You can use this tool to find out the person's hearing frequency range
MicrophoneHearingaid MicrophoneHearingaid converts your PocketPC into a medical hearing aid. Simply put your headphones on and tap the button to start the sound amplifier. The program takes the input from the PocketPC Microphone and sends it to the headphones. The program also has a volume setting. NOTE: This program keeps PocketPC power alive
PatientDoodles PatientDoodles - This program can help you to find out more about a patient. Allow them to doodle on the screen (Joypad changes pages) and give the unit back to you to analyze. You can also save the pads to a file.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
ColourblindTest ColourblindTest - This program is a color blindness test.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer. For free support on installing email me
ExerciseLogs ExerciseLogs - This program allows you to log the total time that you spend exercising.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
SignPerscriptioned SignPerscriptioned - SignPerscriptioned allows you to compose a JPEG prescription with custom text. Enter the text into the text box and tap the "Create Prescription" button to download the JPEG. This service provided by Tom Blackwell PixByTom.com
This program requires that you have both the 'BeanDLL
PatientConcentration PatientConcentration - This program allows you to test a patient's concentration. Select a level and 'start quiz' from the toolbar and ask the patient to enter the letters in as little time as possible.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
DoctorsReport DoctorsReport - This program allows you to record medical notes.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer. For free support on installing email me
NosePicker NosePicker - This program is for plastic surgeons to give their patients a choice of different types of noses.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
Comments on Ep Detect:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Ep Detect is compatible with your device E-TEN InfoTouch M550