DHD Proximity Sensor Recalibrator Due to many DHD's being incorrectly factory calibrated with regards to the proximity sensor, this little app was written to allow one to change the calibration on-the-fly and persist it over reboots.
This app is specifically for those experience issues with the proximity sensor.
Well known symptoms include the following:
- Screen fails to turn off when holding to face on a call
- Screen does turn off when holding to face on a call, but fails to come back on, requiring taking out the battery
These problems are common in custom kernels/ROM's. HTC has addressed this issue however in their kernels from 1.32 onwards, but have failed to release Linux kernel source code for any new versions (latest source is pre-1.32).
Usage:
1. Install app.
2. Run app.
3. Press the toggle button to start monitoring.
4. Move your finger over the proximity sensor (the little LED next to the front facing speaker).
5. Adjust the High and Low threshold values to your liking.
For those whose screen does not turn off, it probably means the factory values are set too high.
For those whose screen does not turn back on, it probably means the factory values are set too low.
The setting will be saved, and will be applied every time you reboot your phone. No need to go through any of the steps unless you want to change the calibration. When the settings are applied at boot time, you will get a toasty indicating the calibration value applied.
Removal:
If for whatever reason you find the application does not work, or you do not want it anymore, just uninstall the app, and reboot. Your original factory settings will be in effect again. This application does not modify your system and does not require root rights.
What's New in This Release:
· Fix issues with sensor listener not getting disabled
What's New in 1.8:
· Correct boot permissions for ICS
· Prevent app from being installed on SD card (which will cause issues)
What's New in 1.6:
· Added support for calling 'su' when permissions are wrong.
What's New in 1.5:
· Only for CM7 users. Use nightly 92 or above. This includes the necessary kernel patch.
· Should work on SENSE with custom kernel. Apply patch (or ask your kernel 'builder' to do so).
· Removed Beer button due to paypal policy...
What's New in 1.4:
· Added some alert dialogs to aid with the problems people are experiencing. (In case of error, please note both the title text, and the first few lines in the text of the alert dialog.)
What's New in 1.3:
· Add some better handling when something goes not as planned (likely on non-DHD hardware)
What's New in 1.2:
· Removed amount from Paypal, feel free to donate whatever you feel like
Like it? Share with your friends!
Supported operating systems:
Google Android 1.0, Google Android 1.5, Google Android 1.6, Google Android 10.x, Google Android 2.0, Google Android 2.1, Google Android 2.2, Google Android 2.3, Google Android 3.0, Google Android 3.1, Google Android 3.2, Google Android 4.0, Google Android 4.1, Google Android 4.2, Google Android 4.3, Google Android 4.4, Google Android 5.x, Google Android 6.x, Google Android 7.x, Google Android 8.x, Google Android 9.x
Dead Pixel Fixer Dead Pixel Fixer - Dead Pixel Fixer
This simple app is to try to fix any dead pixel in your Android device. Just tap on the dead pixel to proceed the recovery. It stimulates the screen region with flash. Keep your device wake up mode and screen on, let the flash square runs for about 15~30 minutes, the pixel can be repaired. It is free for use
Display brightness Display brightness - this application allows you to set up best display brightness fast and easily without opening the settings of your Android device. The screen will reflect unobtrusive brightness indicator
Flashlight Wood Led Light Flashlight Wood Led Light - Flashlight wood is a powerful simple, free app with LED light and several screen modes. It's an Amazing app to turn your device into a pro torch lamp. Free plugins like the Strobe / Blinking light make Tiny Flashlight one of the best productivity and recommend tools for your device. Bright. Fast. Simple. Digital
Android Flashlight Simple program intended to turn an Android-powered phone into a flashlight
Blinky Blinky is an enhancement application to the standard BLN which blinks the LEDs. It gives you an extraordinary amount of control, and can even vibrate for those who have their phone in their pocket.
Only works on the Galaxy S line
Police Lights Free Police Lights Free simulates 8 different Police and Emergency lights right on your Android phone. Choose between 3 different Light styles (Solid, Bulb and LED Lights)
Flashlight + LED Flashlight + LED - The Flashlight application is a very easy to use and super fast application that converts your Android phone into a handy flashlight either using screen or camera led as a torch (camera led is not present in most devices)
Skull Pattern Screen Lock Skull Pattern Screen Lock - make your lock screen horror with Skull Pattern Screen Lock
We are different and we make different, here we are presenting a new different ordinary skull pattern screen lock and enjoy the new and exciting skull pattern screen lock and beautify your phone with the delightful skull background theme
Magnet unlocker Magnet unlocker - is an application which offers different ways of smartphone unlock. You can unlock your device by means of shaking, while connecting dock or connecting power supply. The deviced will be locked if you disconnect dock or power supply correspondingly
Other Software by developer «leppie»:
not found
Comments on DHD Proximity Sensor Recalibrator:
papa beat:
I hope it wprks
Date: 9 Oct 12
HKG:
This app doesnt work with Sony Ericsson Arc S. Error: "Kernel not supported" -ps_kadc not found.
Date: 9 Nov 12
anil:
sensor
Date: 10 Dec 12
Jawad:
his app doesn't work with sky vega a830L Error: "Kernel not supported" -ps_kadc not found.
Date: 30 Apr 13
jpmurf:
Doesn't work on LG G2 D800 "Kernel not supported" -ps_kadc not found.
Date: 5 Aug 14
deepak:
in lava xolo a600 "Kernel not supported" -ps_kadc not found. same issue
Date: 7 Dec 16
If you noted an error or download link is broken, please, report it via this page or use comments.
DHD Proximity Sensor Recalibrator is compatible with your device Goophone M8
