Mergic VPN client allows you to securely connect to a private network, such as your home or corporate LAN, using your handheld's Internet connection. This allows other applications that require network access, such as network HotSync, e-mail clients, and remote control clients to connect to the computers they need to access. Mergic VPN provides you with the connectivity using widely available authentication and encryption technologies along with the Point-to-Point Tunneling Protocol (PPTP).
To use Mergic VPN you'll need access to a VPN server running the PPTP protocol. PPTP server support is available as part of many platforms including most Cisco platforms, Nortel Networks VPN products, several of the Microsoft operating systems (Windows XP, Windows 2000 Professional, Windows 2000 Server, Windows NT Workstation and Server), Linux and other operating system and firewall/VPN servers and appliances such as those available from WatchGuard and SnapGear.
· Auto Connect. User selected applications can automatically connect to and disconnect from the VPN server as needed without requiring the user to launch the Mergic VPN application.
· Split tunneling. Allows simultaneous access to the Internet and private network.
· Supports TCP/IP connections using IEEE 802.11 (Wi-Fi) wireless LAN modules, wireline and wireless modems, smartphones, or a mobile phone connected to a handheld using Bluetooth, infrared or cable.
· Support for 40, 56 and 128-bit Microsoft Point-to-Point Encryption (MPPE) in both stateless and stateful modes. Mergic VPN attempts to connect with the VPN server using the strongest (128-bit, stateless) encryption available. If the VPN server doesn't support that level of encryption Mergic VPN will try to connect with the next strongest level of encryption. This negotiation process continues until the weakest (40-bit, stateful) level of encryption is tried.
· Supports the PAP, CHAP, MS-CHAPv1, and MS-CHAPv2 authentication protocols. For security reasons, PAP authentication is disabled by default and, also by default, if the VPN server attempts to negotiate MS-CHAPv1, NT type responses are enabled and LAN Manager type responses are disabled. PAP authentication and LAN Manager type responses can be enabled by turning off the Encryption Required setting in Mergic VPN.
· Highly optimized encryption and authentication routines provide fast authentication and good perfomance over all network types, including 3G wireless networks and 802.11b wireless LANs.
· 15 day trial
What's New in This Release:
· Added support for PalmOne Tungsten T5
Like it? Share with your friends!
Supported operating systems:
Palm OS 3.x, Palm OS 4.x, Palm OS 5.x
Similar Software:
Sneak-A-Pic Draw pics and beam them to other palms in seconds
MeetingPoint MeetingPoint is a free, simple, short-range contacting software, using Bluetooth wireless technology.
Bluetooth can "see" through walls, doors and people, at all directions at the same time. Its effective range is usually 30ft (10m)
USB-2-IR USB-2-IR is a repeater between the USB and the infrared port of a Visor.
It sends all data it gets on one port to the other.
The infrared port can be used in IrCOMM mode or in the raw SIR mode.
Therefore you are able to connect your computer via USB to to an IrDA device like cell phones or a GPS
TeksFiles TeksFiles - enables any type of file to be beamed to a Palm powered device from another device such as a desktop PC via irda/Bluetooth and stored on the Palm. Items beamed to the Palm may be stored on a memory card or saved in main memory. The files may then be beamed to other devices. The typical use is to copy small files from a desktop system eg
SimpleWire SimpleWire - A wireless communication conduit, SimpleWire is the only interface capable of messaging across all wireless networks.
Hundreds of competing paging networks across the world have brought more than a fistful of solutions which have caused inconsistent messaging protocols
TriConnect TriConnect is a freeware program for communicating through Bluetooth, TCP/IP and Serial line.
It can both establish outgoing and listen for incoming connections. The program uses the TriComm C++ library to provide these features.
For wireless communications, the Bluetooth Serial Port Profile is used
Pocketerm II Pocketerm II is a VT100 terminal emulator
Nemerix BT GPS Nemerix BT GPS- simple application that replicates some of the configuration functions of the RCT (Receiver Control Tool) PC application so that the GPS receiver may be configured from a Palm device.
After making the Bluetooth connection to the GPS, the user can perform Factory, Cold, Warm and/or Hot resets
Other Software by developer «Mergic, Inc.»:
not found
Comments on Mergic VPN:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Mergic VPN is compatible with your device Handera TRGpro
