Auto Light lets you customize the different levels of brightness according the the environment. You just need to choose the brightness level (from 1 to 10) and set the limits of the sensor to the change the level. It is supposed to be better auto adjuster of the backlight for your phone.
Install
Run AutoLight.cab and install in main memory (not in storage card), run AutoLight.Config.cab and install where you like, then softreset (this should also disable the native auto adjust backlight function, check for that in the Control Panel Power applet).
If you have previously installed autolight V2.x and want only upgrade to V2.3 without having your configuration reset to default use the Configurator to stop AutoLight. After that overwrite AutoLight.exe, ChangeLight.exe and AutoLightConfig.exe with the files you find inside AutoLight.zip and softreset.
Configurator
AutoLight working depends on parameters it gets from registry. For details on parameters see AutoLight.reg.txt and AutoLigth.reg
The Configurator gives a more user friendly access to these parameters.
Nevertheless, the configuration process is quite complex and should be done after thoroughly reading AutoLight.reg.txt.
The second tab of the Configurator contains a graphical representation of the calibration table used to convert light sensor to backlight values. Note that: - the horizontal scale is not linear but goes according to square root of the light sensor value;
- the horizontal red segments represent the ranges of light sensor values assigned to every backlight level;
- the horizontal red segment whose backlight level is selected (with the control on top of the second tab) turns blue;
- the small rectangles connecting the segments are the hysteresis;
- the vertical blue line is the current light sensor value (only available when AutoLight is running);
- the horizontal blue line is the current backlight level (only available when AutoLight is running).
User offset change and increment/decrement backlight command line utility
If you are not satisfied with the backlight level as computed by AutoLight you can add a positive or negative offset to it. The offset values, one for use when on battery and one for use when on AC power, can be entered using the Configurator. Moreover, installation puts the small utility ChangeLight.exe together with AutoLight.exe. Running ChangeLight.exe with parameter "/-" decrements backlight level by one, with parameter "/+" increments backlight level by one. The utility then adjusts current offset level accordingly. Using ChangeLight.exe and a hardware button mapper you can change backlight and offset without using the stylus.
If you do not use ChangeLight.exe you can safely delete it.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional
Similar Software:
Pocket PC Mirror 3.2 Pocket PC Mirror 3.2 - Great for a quick rearview mirror, especially in those cubicle situations. Also good for a last minute checkup before those pesky board meetings. Either way, it's a another great application from Pocket PC Advantage
ScreenBlanker ScreenBlanker - This program allows you to blank the display of your PocketPC screen.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
ColorChange A program for painting the screen in a certain color
RBC9-Landscape RBC9-Landscape - RBC9-Landscape is a small tool to rotate your PDA screen (WM5 only) on the left or the right (in fact there are 2 programs, you can install only one): one clic rotate the screen, an other clic and the screen came back to normal.
RBC9-Landscape can be put in the systray (link above) or as an stand alone executable, started, for example, from a launcher
Mobile ScreenTester Mobile ScreenTester is excellent for testing your PDA''s display to quickly find dead pixels. It is simple to use and it is also a very thin application and it is FREE!
PDAlight PDAlight - A tiny utility that converts your prized Pocket PC device into a cheap flashlight.
It fills the entire screen with one of 8 colours of your choice. Selected by using the up/down motions of the directional navigation pad. Default is White (like most flashlights), but it can be Grey, Blue, Red, etc. if the situation requires. Its small, simple, yet effective
SafetyLight SafetyLight - This program is a flashing safety light that you use when you are trick or treating.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
LEDLuxLevel LEDLuxLevel is a LED flashlight that automatically turns on when you are in the dark and off again when the light sensor is exposed to light. Simply tap the button to start/stop the sensor. It works on Samsung Omnia Lite, Omnia Pro, Armani, Omnia II, SCH i920, Omnia II, TOmnia II, Jack, Intrepid and Oz Omnia
Kai's Flash Light Kai's Flash Light - Use your Pocket PC as flashlight in the dark
Any color selectable
Adjust Brightness
Fullscreen and clear screen (without buttons)
New: Lightning Background in any interval from 100 ms to 5 sec.
Device don't Power Off!
System requirements:
Pocket PC 2000, 2002, Windows Mobile 2003 & SE, 5.0, 6
Comments on Auto Light:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Auto Light is compatible with your device HKC G908 (SIM V1)
