AutoActiveSync - Installation Note: Install 2.5 and then unzip 2.5.2 and copy to program files folder (before that stop service and exit configurator!).
AutoActiveSync is a software to auto-connect via BT when in range of Bluetooth cradle (your device could be on or suspended).
There are two settings:
• first: select device from list (device must be paired – this device is computer with ActiveSync profile)
• second: select interval of searching (in suspend and in powered on mode) – this settings are in milliseconds. Please don’t set less then 15000 (15 sec)! Remember that less value cause your device to more often wake up from suspend to unattended mode and check for device if is in range (this could drain battery).
How does it work? It is looking for some system states before looking for specified by user BT cradle and allowing to connect:
• device can’t be connected to cradle (any other connection by USB or manual via BT will be detected)
• device can’t be connected to BT A2DP or BT Hands Free (this is to prevent of audio interruptions)
• device must be charged over “VeryLow” state (I think this is around 20%) or being connected to charger
Usage. After installing please run AutoActiveSync from start menu (this is only configurator - you must configure it before first usage). Then just run the service (on first tab). After restarting device service will autostart (via startup folder in Windows directory). Please note, that application can crash before accepting usage of unsigned dll's!
Warning! Remember, that not only searching for device via BT could drain your battery. When ActiveSync is connected via BT and device is in suspend mode in real it is unattended mode. It mean, that for example CPU is working normally (not in deep suspend) and draining battery.
Registry. This software store settings in registry, right here: HKCU/Software/AutoActiveSync
What's New in This Release:
· Bug fix for scheduling (now tested) and new feature - allow enable wifi using Comm Manager when autodisabled after connecting to A2DP or ActiveSync.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional, Windows Mobile 6.5 Professional
Similar Software:
TaxiDialer TaxiDialer - This program allows you to set the phone number for your local taxi company. When you need a cab place the PocketPC speaker next to the phone mouthpiece and tap the button to dial.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
DtmfPhoneDialer DtmfPhoneDialer - DtmfPhoneDialer is a phone dialer with input pad for DTMF codes.
To use the app, enter the phone number and press the dial button. When the call is connected, you can use the pad to enter the menu options for the phone service using DTMF tones
DTMFAdvanced DTMFAdvanced - DTMFAdvanced is an advanced spec DTMF phone input pad with phone dialer. Enter the phone number and codes and place the speaker of your PocketPC to the phone microphone and tap the 'Dial' button. The program will send the DTMF dial string via the speaker
SpeeddialButtonser SpeeddialButtonser - SpeeddialButtonser lets you quickly call a contact. The app creates finger-friendly buttons assigned to each contact from your phone's speed dial list.
To call someone, simply tap the button to dial. The app also uses your phone's dial verifier to make sure you don't call a contact by mistake
PhoneSleep PhoneSleep Never disturb another meeting again with an unexpected phone call with PhoneSleep. PhoneSleep uses the phones calendar appointments to automatically set the phone ringer to vibrate or silence prior to a meeting and then back to the original setting after the meeting has concluded
DialButton DialButton - DialButton is a quick way to re-dial a preset number with a single tap. Enter the name/number in the settings box. When you want to dial the person simply start the program and tap the button. The program starts the PocketPC phone dialer with the set number
PhoneNumber PhoneNumber - This program can be used when you have a 'word' phone number. Enter the phone number letters and tap the button to find out the real numerical phone number.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
CallsPDFer CallsPDFer creates a printable PDF report of your phone call logs. Just tap the button and enter the name for the PDF file. The app will then create a PDF report of the calls you made and received on your mobile device in chronological order. NOTE: Each device has a maximum number of archived entries. The PDF Libraries are from the DOS TXT2PDF Phil Smith 1996
gVo gVo-Since Google hasn’t released an official Google Voice dialer for Windows Mobile, gVo could be your best variant. It's AssassinsLament who decided to make a Google Voice dialer for Windows mobile
CellIndicator CellIndicator monitors your cellular tower connection and displays the decibel level of the cellular tower (in dBM) in the upper right of any program. Simply run this program in the background and the program will display the cell status as the signal strength
Other Software by developer «dmkpoznan»:
not found
Comments on AutoActiveSync:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
AutoActiveSync is compatible with your device Honeywell 99EX Mobile Computer
