Auto Light lets you customize the different levels of brightness according the the environment. You just need to choose the brightness level (from 1 to 10) and set the limits of the sensor to the change the level. It is supposed to be better auto adjuster of the backlight for your phone.
Install
Run AutoLight.cab and install in main memory (not in storage card), run AutoLight.Config.cab and install where you like, then softreset (this should also disable the native auto adjust backlight function, check for that in the Control Panel Power applet).
If you have previously installed autolight V2.x and want only upgrade to V2.3 without having your configuration reset to default use the Configurator to stop AutoLight. After that overwrite AutoLight.exe, ChangeLight.exe and AutoLightConfig.exe with the files you find inside AutoLight.zip and softreset.
Configurator
AutoLight working depends on parameters it gets from registry. For details on parameters see AutoLight.reg.txt and AutoLigth.reg
The Configurator gives a more user friendly access to these parameters.
Nevertheless, the configuration process is quite complex and should be done after thoroughly reading AutoLight.reg.txt.
The second tab of the Configurator contains a graphical representation of the calibration table used to convert light sensor to backlight values. Note that: - the horizontal scale is not linear but goes according to square root of the light sensor value;
- the horizontal red segments represent the ranges of light sensor values assigned to every backlight level;
- the horizontal red segment whose backlight level is selected (with the control on top of the second tab) turns blue;
- the small rectangles connecting the segments are the hysteresis;
- the vertical blue line is the current light sensor value (only available when AutoLight is running);
- the horizontal blue line is the current backlight level (only available when AutoLight is running).
User offset change and increment/decrement backlight command line utility
If you are not satisfied with the backlight level as computed by AutoLight you can add a positive or negative offset to it. The offset values, one for use when on battery and one for use when on AC power, can be entered using the Configurator. Moreover, installation puts the small utility ChangeLight.exe together with AutoLight.exe. Running ChangeLight.exe with parameter "/-" decrements backlight level by one, with parameter "/+" increments backlight level by one. The utility then adjusts current offset level accordingly. Using ChangeLight.exe and a hardware button mapper you can change backlight and offset without using the stylus.
If you do not use ChangeLight.exe you can safely delete it.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional
G-Rotator G-Rotator is an application which uses the G-Sensor to detect the orientation of the device to change the screen orientation respectively. Sensitivity of sensor and duration after which data from sensor has to be fetched is user-defined
DisOff DisOff - program to turn off the screen and blocking / redirection soft keys. It is designed to save battery life while listening to music, and for easy management of a player so you can use it to lock the screen and the buttons, the device with no sleep
HHZSoft OffScreen HHZSoft Offscreen provide the easist and convenient way to turn off screen and backlight. Also supports tray run mode and timer function, system reset & shutdown mode.
mFlash mFlash is a camera flashlight application. With this app you can toggle the camera flashlight on and off, send SOS morse code and text you can enter. And there is a fun app inclusive, a simple but funny strobe light. It's a Samsung Omnia exclusive application so this means that it's only working on this device
PLToggle PLToggle is a small app that toggles the display orientation back and forth to the rotation of your choice, without the need for the g-sensor.
The default installation includes the settings screen (available from your start menu), and the application itself, which is available via a long-hold of the call button
LEDFlasher LEDFlasher - turns the camera LED light into a variable length flasher. Simply tap the button and adjust the speed slider to power on the camera LED to the desired speed. It works on Omnia Lite, Omnia Pro, Armani, Omnia II, SCH i920, Omnia II, TOmnia II, Jack, Intrepid and Oz Omnia
LoveLight LoveLight - This program converts your PocketPC into a flashlight.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer. For free support on installing email me
FakeMoon FakeMoon - This program displays a fake full moon. This can be used for various purposes.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
Ambient Color Ambient Color - The application Ambient Color brings colored light into your life. You can choose your favorite color or select continuesly changing colors.
The applications comes with to cool sliders for settign the color itself and the color changing speed. Further you can use your mobile phone as remote control for your Windows computer
Comments on Auto Light:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Auto Light is compatible with your device HTC Atlas
.jpg "HTC Atlas")
