Auto Light lets you customize the different levels of brightness according the the environment. You just need to choose the brightness level (from 1 to 10) and set the limits of the sensor to the change the level. It is supposed to be better auto adjuster of the backlight for your phone.
Install
Run AutoLight.cab and install in main memory (not in storage card), run AutoLight.Config.cab and install where you like, then softreset (this should also disable the native auto adjust backlight function, check for that in the Control Panel Power applet).
If you have previously installed autolight V2.x and want only upgrade to V2.3 without having your configuration reset to default use the Configurator to stop AutoLight. After that overwrite AutoLight.exe, ChangeLight.exe and AutoLightConfig.exe with the files you find inside AutoLight.zip and softreset.
Configurator
AutoLight working depends on parameters it gets from registry. For details on parameters see AutoLight.reg.txt and AutoLigth.reg
The Configurator gives a more user friendly access to these parameters.
Nevertheless, the configuration process is quite complex and should be done after thoroughly reading AutoLight.reg.txt.
The second tab of the Configurator contains a graphical representation of the calibration table used to convert light sensor to backlight values. Note that: - the horizontal scale is not linear but goes according to square root of the light sensor value;
- the horizontal red segments represent the ranges of light sensor values assigned to every backlight level;
- the horizontal red segment whose backlight level is selected (with the control on top of the second tab) turns blue;
- the small rectangles connecting the segments are the hysteresis;
- the vertical blue line is the current light sensor value (only available when AutoLight is running);
- the horizontal blue line is the current backlight level (only available when AutoLight is running).
User offset change and increment/decrement backlight command line utility
If you are not satisfied with the backlight level as computed by AutoLight you can add a positive or negative offset to it. The offset values, one for use when on battery and one for use when on AC power, can be entered using the Configurator. Moreover, installation puts the small utility ChangeLight.exe together with AutoLight.exe. Running ChangeLight.exe with parameter "/-" decrements backlight level by one, with parameter "/+" increments backlight level by one. The utility then adjusts current offset level accordingly. Using ChangeLight.exe and a hardware button mapper you can change backlight and offset without using the stylus.
If you do not use ChangeLight.exe you can safely delete it.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional
Gyrator Gyrator has an advanced graphical configuration interface which can be used to create thousands of combinations of events to suit every users needs. Windows can be excluded from all events, or only some of them. Customizable sound events can be triggered, and the device can be made to vibrate for any event
BlackMe BlackMe is a tool that turns the screen off while you don't need it.
You can use it while logging gps data (for example with WMMiniGPS), when you connect your device to the desktop to sync/recharge it, when you're listening to music with an mp3 player, etc...The best method to use this program is to associate a button to it (through Settings->Buttons)
Screen Rotator Pro.Net With this little program you can rotate the screen manually or automatically. Precondition is a built in Accelerating-Sensor*. When rotating the device the screen rotates automatically in the right direction
TouchResponse TouchResponse - This program is a touch driver to handle the touchscreen presses and vibration. TouchResponse will vibrate on touch.
A settings program exists to configure how the vibration works. Since this is a touch driver, there is no program you need to run to start it
G-Rotator G-Rotator is an application which uses the G-Sensor to detect the orientation of the device to change the screen orientation respectively. Sensitivity of sensor and duration after which data from sensor has to be fetched is user-defined
AutoCallLocker AutoCallLocker is an application that will lock and blank the screen on a call using the G-Sensor or the Light sensor, and then unlock the screen when moving the phone away from the ear.
What's New in This Release:
· This version has a different architecture now. It is composed out of 2 executables instead of one
Ambient Color Ambient Color - The application Ambient Color brings colored light into your life. You can choose your favorite color or select continuesly changing colors.
The applications comes with to cool sliders for settign the color itself and the color changing speed. Further you can use your mobile phone as remote control for your Windows computer
Pocket LiTE Pocket LiTE is simple Torch / light app for Windows Mobile Phones. It has SOS function, which flashes SOS signal in Morse code
MyLight A simple backlight controlling application
Comments on Auto Light:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Auto Light is compatible with your device HTC Atlas
.jpg "HTC Atlas")
