LeoCpuSpeed is an app to control the speed of the CPU. Started out as a test to determine if the "1ghz hack" was genuine or not, and ended up to be able to control cpu speed and to overclock to some degree.
Notes on auto-apply speed at startup
1) Disable autoscaling
2) Select the cpu speed you want
3) Menu > Apply speed at boot
Notes on overclocking
1) Obviously overclocking is completely at your own risk, as you could harm your device. Luckily, in most cases, your device will just lock up and you'll need to restart your device (remove battery, re-insert and turn on again).
2) The green buttons were the overclock settings that have been successful 9 out of 10 times. The orange speeds have been successful like 5 out of 10 times. The red speeds have never worked for me yet.
3) The higher the speed, the more unstable. This is mainly because I don't have a way to increase voltage of the core.
4) Overclocking only works on AC power! When on battery power, the overclock will work but will be undone within 500 milliseconds by the OS. Something within the OS, or a driver, or the radio rom, enforces the proper CPU speed every 500ms.
Notes on battery
I have seen only very very miniscule differences on battery usage when using 998MHz all the time. You really wouldn't notice the difference if it were at 998MHz all the time, or at 768MHz (default). The only thing you _do_ notice, is that it feels snappier.
Try playing a decent movie in TCPMP or coreplayer with autoscaling on, and try again with autoscaling off and at 998mhz. Huge difference. (Note that some ROMs already have autoscaling disabled and will run at 998MHz all the time, like CleanEX. You won't notice a difference there obviously.)
· Updates CPU speed every half second (calculated from the processor registered directly! not from some driver)
· Can stress the CPU to show you that it goes up to 998mhz under load (when idle speed is less than 998mhz)
· Disable autoscaling so that you can control the speed yourself
· Select the speed you want by moving the slider or pressing 768/998 presets
· Automatically disable autoscaling and set speed at boot (via menu)
· Overclocking
What's New in This Release:
· For advanced users only: call LeoAutoCpuSpeed.exe with a custom performance level to set that speed (and disable autoscaling if enabled). So, calling "LeoAutoCpuSpeed 12" will set it to 768MHz. And FYI, 18 = 998MHz.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Requirements:HTC Leo
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional, Windows Mobile 6.5 Professional
Similar Software:
SuspendScheduler SuspendScheduler - SuspendScheduler allows you to set the times when your PocketPC power suspend will be disabled. You can make a power chart file and set the times when the power stays on. The program will keep the power on in the selected time slots. NOTE: Use caution when using this program since you can drain your PocketPC battery
Update for HTC Diamond2 Power LED Notification Update for HTC Diamond2 Power LED Notification - This update for the HTC Diamond2 allows you to see the battery charging status right from the LED. Now enhanced to illuminate green when fully charged, with a quick look you will know when your device is powered and ready to go.
Copy the update, which is an .exe file, to your device. To install the update, tap the
XCPUScalar 2007 XCPUScalar allows you to dynamically scale the processor speed of your handheld Pocket PC 2002, 2003, WM2003 SE, and Windows Mobile 5. It uses the power of the XSCALE or TI OMAP (OMAP850 and OMAP1510) processor and unlocks its dynamic scaling capabilities. You can scale the processor speed from 100 to 728MHz
HTC HD Black Dialer HTC HD Black Dialer - Black dialer for HTC HD. Only the dialer graphics are changed for better reading in sun light, so it is for all languages
URL2Opera URL2Opera - As strange it might be OperaL.exe does not accept a .url file as command line parameter. Therefore, it is not possible to simply associate .url files to Opera and open them with it.
URL2Opera is a small application that extracts the URL from the .url file and passes it to Opera. This way the association became possible.
Install
Run URL2Opera.cab
Diamond Profile Switcher With this tool you can switch between 'volume on' and 'vibrate' by shaking your phone
Sprint Forced Roaming Sprint Forced Roaming - If you're in a poor signal area, your phone will switch over to a different network to allow you to make the call. This is great, but the problem is that as soon as it senses even a faint Sprint signal, your phone will jump back on to the weaker spring signal resulting in more dropped calls and poor call quality
Titanizer Titanizer - Titanizer is a simple Flash tool to edit the "tabs" of the Windows Mobile 6.5 plugin. The aspect is simple and draggable. You can change the order and remove the tabs you don't want. You can also add new tabs (to add/test new plugins) and change the Left SoftKey.
To use:
- Have WM6.5
- Install Flash 7 (Flash Lite 3.1 doesn't work)
MyRDM MyRDM - After 10 minutes of inactivity of a Terminal Server session on Windows Mobile devices, the Remote Desktop Mobile application needs you to logon again stating that a timeout "set by the server administrator or by network policy" occurred
Blank Today Plugin A today plugin that allows you to create a transparent space between other today plugins
Other Software by developer «Martijn Stolk»:
Msm7kCpuSpeed Msm7kCpuSpeed - An application for overclocking the MSM7k SoC on the Raphael. The same processor is present on the Diamond, Rhodium and the Topaz, so it should work on all of these devices. It was able to underclock to 57MHz and overclock up to 710MHz, using small 19.2MHz steps
TorchButton TorchButton Dropped your keys? Finding something behind the bench? Performing surgery on a computer and need to find that jumper on the mainboard?
This is a simple application built for some HTC devices that have a hardware LED, normally used to take pictures in the dark. However the LED can be used as a handy pocket flashlight
KeypadLedControl KeypadLedControl By default the keypad lights turn off after 10 seconds when the device comes out of standby. This little application keeps the light on while the display is on
LeoExtendedNotifications LeoExtendedNotifications is a small app that blinks the keypad when there are notifications.
If you also use KeypadLedControl, you may get some irregular blinking during notifications. Nothing serious