Auto Light lets you customize the different levels of brightness according the the environment. You just need to choose the brightness level (from 1 to 10) and set the limits of the sensor to the change the level. It is supposed to be better auto adjuster of the backlight for your phone.
Install
Run AutoLight.cab and install in main memory (not in storage card), run AutoLight.Config.cab and install where you like, then softreset (this should also disable the native auto adjust backlight function, check for that in the Control Panel Power applet).
If you have previously installed autolight V2.x and want only upgrade to V2.3 without having your configuration reset to default use the Configurator to stop AutoLight. After that overwrite AutoLight.exe, ChangeLight.exe and AutoLightConfig.exe with the files you find inside AutoLight.zip and softreset.
Configurator
AutoLight working depends on parameters it gets from registry. For details on parameters see AutoLight.reg.txt and AutoLigth.reg
The Configurator gives a more user friendly access to these parameters.
Nevertheless, the configuration process is quite complex and should be done after thoroughly reading AutoLight.reg.txt.
The second tab of the Configurator contains a graphical representation of the calibration table used to convert light sensor to backlight values. Note that: - the horizontal scale is not linear but goes according to square root of the light sensor value;
- the horizontal red segments represent the ranges of light sensor values assigned to every backlight level;
- the horizontal red segment whose backlight level is selected (with the control on top of the second tab) turns blue;
- the small rectangles connecting the segments are the hysteresis;
- the vertical blue line is the current light sensor value (only available when AutoLight is running);
- the horizontal blue line is the current backlight level (only available when AutoLight is running).
User offset change and increment/decrement backlight command line utility
If you are not satisfied with the backlight level as computed by AutoLight you can add a positive or negative offset to it. The offset values, one for use when on battery and one for use when on AC power, can be entered using the Configurator. Moreover, installation puts the small utility ChangeLight.exe together with AutoLight.exe. Running ChangeLight.exe with parameter "/-" decrements backlight level by one, with parameter "/+" increments backlight level by one. The utility then adjusts current offset level accordingly. Using ChangeLight.exe and a hardware button mapper you can change backlight and offset without using the stylus.
If you do not use ChangeLight.exe you can safely delete it.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional
Keylight Activate / Deactivate the keyboard LEDs on Treo 700w/750v, HTC TyTn, MDA Pro, MDA III and others
Kai's Screen Rotator.Net Kai's Screen Rotator.Net - With this free program you can turn the screen in all 4 directions. You can lay the program on a button for fast access. This program is of special interest for devices where a rotate function is not more available, e.g. HTC Touch Diamond
CarLights CarLights - This program allows you to convert your PocketPC computer into a head/tail light for your car.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
PDAlight PDAlight - A tiny utility that converts your prized Pocket PC device into a cheap flashlight.
It fills the entire screen with one of 8 colours of your choice. Selected by using the up/down motions of the directional navigation pad. Default is White (like most flashlights), but it can be Grey, Blue, Red, etc. if the situation requires. Its small, simple, yet effective
Fake FingerPrint LockScreen Fingerprints are among the most unique signatures known to mankind, and security is always a primary thought to the everyday tech user
Screen Alive Screen Alive is a simple application that easily and temporarily overrides your screen power settings so that the screen will not dim or shut off while Screen Alive is running
FakeMoon FakeMoon - This program displays a fake full moon. This can be used for various purposes.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
Torche Torche - When you have need to make a light open this program and with a simple click your camera FLASH is ON!!!! It's very important to have this program... In this installation install the program in folder Windows/Torche. In this folder you find another file "dllSAMSUNG", you must install also this file..
Hinavigator Hinavigator - Touch To Go is a software package that allows you to launch programs, make calls, view weather information, access Phone profiles, do ALT-TAB, turn on/off today Plug-ins, and navigate your device by only one hand
Comments on Auto Light:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Auto Light is compatible with your device HTC Whitestone
