Auto Light lets you customize the different levels of brightness according the the environment. You just need to choose the brightness level (from 1 to 10) and set the limits of the sensor to the change the level. It is supposed to be better auto adjuster of the backlight for your phone.
Install
Run AutoLight.cab and install in main memory (not in storage card), run AutoLight.Config.cab and install where you like, then softreset (this should also disable the native auto adjust backlight function, check for that in the Control Panel Power applet).
If you have previously installed autolight V2.x and want only upgrade to V2.3 without having your configuration reset to default use the Configurator to stop AutoLight. After that overwrite AutoLight.exe, ChangeLight.exe and AutoLightConfig.exe with the files you find inside AutoLight.zip and softreset.
Configurator
AutoLight working depends on parameters it gets from registry. For details on parameters see AutoLight.reg.txt and AutoLigth.reg
The Configurator gives a more user friendly access to these parameters.
Nevertheless, the configuration process is quite complex and should be done after thoroughly reading AutoLight.reg.txt.
The second tab of the Configurator contains a graphical representation of the calibration table used to convert light sensor to backlight values. Note that: - the horizontal scale is not linear but goes according to square root of the light sensor value;
- the horizontal red segments represent the ranges of light sensor values assigned to every backlight level;
- the horizontal red segment whose backlight level is selected (with the control on top of the second tab) turns blue;
- the small rectangles connecting the segments are the hysteresis;
- the vertical blue line is the current light sensor value (only available when AutoLight is running);
- the horizontal blue line is the current backlight level (only available when AutoLight is running).
User offset change and increment/decrement backlight command line utility
If you are not satisfied with the backlight level as computed by AutoLight you can add a positive or negative offset to it. The offset values, one for use when on battery and one for use when on AC power, can be entered using the Configurator. Moreover, installation puts the small utility ChangeLight.exe together with AutoLight.exe. Running ChangeLight.exe with parameter "/-" decrements backlight level by one, with parameter "/+" increments backlight level by one. The utility then adjusts current offset level accordingly. Using ChangeLight.exe and a hardware button mapper you can change backlight and offset without using the stylus.
If you do not use ChangeLight.exe you can safely delete it.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional
Similar Software:
Kai's Flash Light.Net Kai's Flash Light.Net - Use your Pocket PC as a flashlight. You can use the whole brightness of the screen, set color, choose from different lamps and let it blink
NiX Flashlight NiX Flashlight - Save 10%! Purchase this program directly from our website. http://www.nix-software.com With this program, you can use your Windows Mobile Pocket PC to guide you in the dark. It acts as an easy to use flashlight, perfect for travel. The light is bright enough to find your way in even the darkest of rooms
Morse Torch Morse Torch - convert your mobile into a pocket torch! This torch comes with a PTT key that allows you to use the torch for sending a message in morse code. The programm uses the mobile's flashlight LEDs.
Try the free demo version! This program is designed to work with HTC HD2, no other models have been tested for compatibility so far
Screen Alive Screen Alive is a simple application that easily and temporarily overrides your screen power settings so that the screen will not dim or shut off while Screen Alive is running
SmartLight Automatic Backlight Tired of the display backlight going out when you are looking at the screen - e.g. while thinking about the right word for an sms? Wouldn't it be nice if your phone knew when you needed the light and when not? SmartLight does just that: Once you have opened an application, the backlight stays on - until you close or hide the application, switching the light off automatically
Lumos Lumos is fully customizable automatic backlight level changer developed as a complete replacement for stock HTC auto-backlight service. A wide range of HTC branded devices is supported starting from HTC Diamond/Touch Pro up to the current WM flagship HD2
TorchButton TorchButton Dropped your keys? Finding something behind the bench? Performing surgery on a computer and need to find that jumper on the mainboard?
This is a simple application built for some HTC devices that have a hardware LED, normally used to take pictures in the dark. However the LED can be used as a handy pocket flashlight
PocketForce PocketForce - PocketForce is an application that turns your PocketPC (Compaq iPAQ in particular) into a $500 flashlight.
It fills up the display with white color and turns the backlight to the maximum brightness setting (iPAQ only). Tap on the display to turn it into a black mirror
PDAlight PDAlight - A tiny utility that converts your prized Pocket PC device into a cheap flashlight.
It fills the entire screen with one of 8 colours of your choice. Selected by using the up/down motions of the directional navigation pad. Default is White (like most flashlights), but it can be Grey, Blue, Red, etc. if the situation requires. Its small, simple, yet effective
Comments on Auto Light:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Auto Light is compatible with your device i-Mate JAQ3
