Categories: Internet & Communications, System Utilities, Travel & Navigation
Upload date: 17 Jun 11
Developer: James Larry Gaines
License: Freeware
Downloads: 1427 File Size: 370 Kb
SmartProtect helps you track and recover your phone once stolen or lost.
Features includes:
1. A Thief or Lost Prevention Software with SMS Auto-Responder and GPS Capability created for Windows Mobile Devices.
2. When you forget your phone and can''t remember where you put it, you can SMS your phone to get the exact location via GPS information if your phone has GPS Capability or approximate location based on Cell Location.
3. You can SMS your phone for other information such as IMSI, IMEI or even remotely reboot your phone etc.
4. This software is also equipped with Thief Prevention system which will automatically SMS your partner phone number if the SIM has been changed against the registered SIM.
5. This software supports registration of Multiple SIM Cards and of Multiple Phone Conctacts as Partners.
6. When your phone has been stolen, it will automatically SMS relevant information such as IMEI, SIM Card Number or IMSI, GPS Location if supported or Cell Location.
7. It is able to also auto-delete Phone Memory Contacts if the phone has been stolen.
8. It is password protected and the password is encrypted with AES-Encryption.
9. Its un-install proof. It requires special procedure to uninstall the protection, so even if you uninstall it, it is still working.
10. It has MortScript support.
Note that Cell Location depends on your device. It should be working but the problem is not all devices interfaces with RIL functionality so it may or may not work.
For testing, kindly use Emulation Mode to determine if the application will work on your phone before using these features:
1. Make Phone Unusable
2. Protected Folders
3. Delete Contacts on SIM Change
Emulation mode will run the protection, however on test mode only and not real mode. Therefore, it will just produce a log file to tell you of the action it is supposed to make (however since its a test mode, it does not do that action). If everything is fine, make sure that after testing, to disable the emulation mode.
This software also can accept SMS Commands from the partner phone so that it can return informations as commanded by you explicitly. Here are the SMS Commands that you can send. Note though that the SMS is only accepted when :
1. The SMS came from a partner phone. (You need to register the phone as a partner phone first).
2. The password is correct. Password is based on the password that you have saved when you configure SmartProtect on your phone. The password is authenticated by the phone once the SMS Command is received.
3. When the SMS Command is correct.
The SMS commands syntax is:
::/[command],[password]
example :
::/getGPSLocation,mypassword
Available Commands are:
getIMEI - Retrieves the IMEI Number
lockMyPhone - makes your phone unusable
enableLockPhone - Enable the Lock Mechanism of your Phone. When your phone is stolen, your phone will become unusable.
rebootPhone - Reboots your phone.
deleteContacts -Deletes your mobile phone contacts. It does not delete the SIM Card Contacts.
unregisterPhone - Unregisters the sender as a partner phone.
disableSecurity - Disables the security mechanism of your phone. This requires restart to take effect.
enableSecurity - Enables the security mechanism of your phone.This requires restart to take effect.
getIMSI - Retrieves the IMSI Number.
alertContacts - alerts your contacts that your phone has been stolen.
getCellLocation - Gets the approximate location based on Cell Tower that your phone has registered to.
getGPSLocation - Retrieves the GPS Coordinates.
exitApp - When you use getGPSLocation command, this application stays in the memory. This command exits the application. However, this applications will still be activated if any of the command is received.
registerPhone - Registers your sender as partner phone number.
listCommands - List the commands available for the Software.
versionInfo - Retrieves the current version of the SmartProtect.
deleteProtectedFolders - Removes the protected folders.
disableEmulation - Disabled the emulation mode.
stopAlert- Stops the alertContacts action.
stopAlert- Stops the alertContacts action.
runPreScript- Runs the pre-action MortScript you've defined.
runPostSCript- Runs the post-action MortScript you've defined.
runAllScripts- Runs all the MortScripts you've defined.
Please follow the procedure below to update the software:
1. From the partner phone. SMS your phone with the command ::/exitApp,[password]. This is to make sure that the SMS module is not loaded in the memory or update may fail.
2. Uninstall the SmartProtect. (optional)
3. Install the latest SmartProtect. If you didnt uninstall SmartProtect, it will ask you if you want to uninstall the older SmartProtect. Just click.
4. Once installed, Run SmartProtect to verify that your settings is still there.
5. Once verified, click either exit or save.
6. You will be notified that there's a need to restart the phone. Proceed to restart.
7. To verify its installed, SMS your phone with ::/versionInfo,< password >. This should yield the latest version.
Please follow the procedure below to remove the software:
1. Uninstall SmartProtect from your Mobile Phone.
2. From the partner phone. SMS your phone with the command ::/exitApp,[password]. This is to make sure that the SMS module is not loaded in the memory or update may fail.
3. Install SmartProtectRemove.CAB to your mobile phone.
3. Run the SmartProtectRemove
4. Enter the appropriate password you've configured for SmartProtect. Click on Remove SmartProtect.
5. Reboot/soft reset your phone.
6. To verify that it has been removed, SMS any commands to your phone. It should get thru now.
THOSE WITH SMS MODULE OF SMARTPROTECT NOT WORKING
Kindly run SmartProtect on Emulation Mode and test by sending SMS commands. The emulation mode works for all commands except for disableemulation, versioninfo and listcommands. Then the resulting log, kindly send to me for debugging purposes. Note that in emulation mode, no SMS will be sent out and all actions are recorded on the log file
What's New in This Release:
· Removed Debug Statements.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Pocket PC 2002, Windows Mobile 2003, Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional, Windows Mobile 6.5 Professional
Similar Software:
FON Access Points for Algeria FON Access Points for Algeria - FON offers you a new Points of Interest service (POIs). This allows you to download FONspots directly to your navigation device.
What does that mean? You can download a Points of Interest file directly to your navigation device
BikeTrack BikeTrack - This application enables everybody (who got your user/pass) look up your location on the net, using your the page http://fiets.galway.nl/ and keeps track of you.
On the webpage you can also create a username so you can use the software.
What it does:
- Gets location from GPS.
- Sends it to BikeTrack Server
FON Access Points for Germany FON Access Points for Germany - FON offers you a new Points of Interest service (POIs). This allows you to download FONspots directly to your navigation device.
What does that mean? You can download a Points of Interest file directly to your navigation device
hdSpeedo hdSpeedo is a speedometer that is driven from a GPS signal.
· User configurable background colours
· Day/Night colour schemes (Choose by clicking on the top status bar)
· Rotatable (Portrait or Landscape)
· Gesture enabled (Move between screens)
· Point and Track logging now available as
RestaurantGoogler RestaurantGoogler uses the GPS on your PocketPC to find the top 50 closest local Restaurants sorted via GPS distance. Tap the button to start the GPS and when you get a lock tap on it to view the list of local Restaurants. You can also dial the Restaurant. The GPS maps and business search service is provided by Google
NaviComputer NaviComputer is a GPS maps and offroad navigation/tracking software designed for Windows Mobile devices.
What makes NaviComputer outstanding is the ability to view maps offline - without need for internet connection or dataplan
3dtracking 3dtracking has revolutionized the tracking industry through the launch of it's PDA tracking software. Any Windows-based PDA (with access to an internal or external GPS receiver) can be tracked using the 3dtracking PDA software
SupertweetGPS SupertweetGPS - SupertweetGPS allows you to send GPS based tweets to Twitter via SuperTweet.net. When you get a GPS lock enter the text and tap the button to send the Tweet with your current GPS. The program will send the tweet to Twitter.com with your current GPS. NOTE: To use Geolocation on Twitter in 'Settings/Account/Tweet Location' enable
OfficeGPSs OfficeGPSs - OfficeGPSs can be used update your GPS location and send a text note of your status to your office staff. The program sends the GPS information to the FTP server. You can also download the GPS location of all staff and view them on the Google.com maps.
This program requires that you have both the 'BeanDLL
FON Access Points for Saudi Arabia FON Access Points for Saudi Arabia - FON offers you a new Points of Interest service (POIs). This allows you to download FONspots directly to your navigation device.
What does that mean? You can download a Points of Interest file directly to your navigation device
Other Software by developer «James Larry Gaines»:
not found
Comments on SmartProtect:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
SmartProtect is compatible with your device i-mate Ultimate 5150
.jpg "i-mate Ultimate 5150")
