EVDash is a Palm OS application that acts as a set of dash board gauges for electric vehicles. It displays battery pack voltage, amps being drawn from the battery pack, and two different estimates of remaining battery capacity. It works with Xantrex's Link 10, formerly called the E-Meter. Just plug the Palm device into the E-Meter, preferably through an optical isolator to protect the Palm device and start the EVDash program.
- Voltage - Battery pack voltage.
- Amps - Amps being drawn from or put back into the battery pack.
- Capacity based on voltage - Capacity calculated from the pack voltage under very low load. Voltage drops off as pack capacity drops.
- Capacity based on amps - Capacity calculated from the amps drawn integrated over time compared to the pack capacity. The peukert effect is taken into account.
Once you install the EVDash.prc on the Palm pull down the menu and go to the setup window. Enter the pack capacity and the Peukerts constant. The state of charge voltages should be determined experimentally by recording the voltages as the battery pack is completely discharged.
To transfer ASCII data from your Palm, use the standard Hot sync cable and a terminal program. Set the following communications information:
Supported operating systems:
Palm OS 3.x, Palm OS 4.x, Palm OS 5.x
Similar Software:
AppLight Hack AppLight Hack - control the Backlight state for a specific application
BlazerDA BlazerDA is a DA to delete all cookies, history, and autofill from Blazer web browser automatically
X-Master (Russian) X-Master (Russian) manages PalmOS system extensions (aka Hacks).
X-Master is a free compatible successor to Edward Keyes' Hackmaster and offers various improvements, both technical and in the user interface
Sleep for Palm OS Sleep for Palm OS is designed to convert one of your hardware buttons into a fully functioning power button. This is useful for replacing a power button that has worn out.
Sleep can also be used to move the power button to the front of the pda for convenience. Sleep is fully supported on OS version 3.0 devices and up. It is also fully OS 5 compatible
DevName DevName lets your Palm/Sony device become any other Palm/Sony device!
Ender for Palm OS Ender for Palm OS is a word completion tool for word processing on your Palm Powered handheld. Within any standard text field in any application, Ender will suggest a list of possible words once you have entered the first few letters.
Please note that Ender is not Palm OS 5.0 compatible and will not run on Palm OS 5.0 handhelds
Category Hack Category Hack lets you switch launcher categories by writting first letter of category name.
Work in Palm launcher and in SilverScreen.
What's New in This Release:
· You can use original functionality of launcher by writting the letter with shift. This is forced in 'All' category
TealMaster French TealMaster French - Replace Hackmaster with TealMaster, the supercharged 100%-compatible system extensions manager. TealMaster adds enhanced stability, configuration and diagnostic features and PalmOS 5.0 hack emulation.
With numerous unique features, TealMaster sets the new standard for managing system extension programs, commonly called "hacks
Skeleton Key Skeleton Key is a program that automatically calculates the possible combinations of a MasterLock combination lock.
The number of combinations is decreased from 64,000 to 100 which can then be checked in under 10 minutes!
In order for this system to work however you must be able to find the third number
EV1Dash EV1Dash is a program for Palm OS devices that will collect data from the EV1 and display it on the Palm OS device display. The intent is to provide more information to the driver so that range and performance can be optimized. Here is one of the displays. There are two other displays
