No Streak Hack - Some Palm IIIx displays have the 'streaking' problem. They tend to extend vertical lines (can be seen in the datebook month view) . Sometimes this can be adjusted by reducing the contrast using the contrast adjustment wheel.
This problem can sometimes be solved with software by changing the display refresh frequency. The PalmOS 3.1.1 upgrade and other programs cure this.
Flickering greyscale on the Palm IIIx and Handspring Visors
In order to prevent streaking, the PalmOS 3.1.1 upgrade and all later OS versions for the Palm IIIx and some old models of the Handspring Visor (not the prism or the platinum) reduce the screen refresh rate like this hack does.
Reducing the refresh rate has one major disadvantage: Greyscale pixels are generated by turning the pixels on and off very fast by the video controller. Together with the reduced screen refresh rate of the Palm IIIx and some Visors, this causes visible flicker in greyscale video modes used by some games and e.g. programs like AvantGo.
It is possible to setup nostreak to disable the anti-streaking code in these OS versions. In order to prevent flickering greyscale modes in e.g. programs like PalmBoy on the Palm IIIx and the Handspring Visor, install nostreak, start the hackmaster application, go to the nostreak setup (the small '+') and set the refresh rate to '0' and select 'enable in greyscale mode'. After that you might need to re-adjust the contrast setting, but the flickering in greyscale applications will be gone.
This disables the anti-streaking features of PalmOS and you might see streaking on your Palm IIIx or Visor after this. There is no way to reduce streaking and to avoid flickering greyscale at the same time.
What's New in This Release:
· Version 1.3 can be activated for greyscale modes separately
Like it? Share with your friends!
Requirements:HackMaster
Supported operating systems:
Palm OS 3.x, Palm OS 4.x, Palm OS 5.x
Similar Software:
TinyMirror TinyMirror - Unlike other mirrors, TinyMirror uses the whole screen (there is no annoying menu bar to ruin your reflection).
TinyMirror can also display an all black or an all white screen.
You can toggle between the two by pressing the scroll buttons.
TinyMirror can also conveniently transform into a flashlight if the backlight is turned on
AppLight Hack AppLight Hack - control the Backlight state for a specific application
Reflect Reflect turns your Palm handheld into a mirror.
It is packed with features and open source.
The latest version includes: preferences that are saved between sessions, infrared beaming from within the application, Graffiti ShortCuts for all menu items, and monochrome and color support.
Reflect is freeware released under the GNU General Public License (GPL)
Reflecticus Reflecticus is a Mirror/Flashlight for Palm OS
Screen Prefs Screen Prefs sets the default screen color/gray scale depth and color scheme for your Palm OS device. It can handle screen modes from black and white (1-bit) all the way up to 16-bit color.
This program shows up in your Palm Preferences application (known as Prefs) and not in the application launcher. However, it can be configured to show up in the application launcher
StayOn for Fossil WristPDA StayOn prevents the backlight from automatically turning off after 10 seconds of inactivity
Lamp Lamp only displays a never-ending white screen which has no value expect that it can be used as a backup lamp. At the bottom of the screen, the battery percentage level is displayed.
No parameters, no special features - excepts that UP and DOWN buttons can be used to increase/decrease brightness. Tap on the screen to exit the application
Torch-by-stone-age Torch-by-stone-age - Torch is the worlds smallest useful Palm app at 494 bytes! makes your screen as bright as possible through judicious choice of screen colouring (black)
View:selF View:selF is another mirror for your Palm
Other Software by developer «Till Harbaum»:
Real Freedom Real Freedom is a converter for Phoinix cartridge images. It can convert images from the format used by the Gameboy emulators Liberty (commercial) and Phoinix/PalmBoy (free) and gameboy cartridges stored on SmartMedia using the axxPac into the Phoinix format.
Currently the converter creates a blank RAM image for cartridges with built-in RAM
Step Counter Step Counter - This program needs the tilt sensor modification to work, it uses the acceleration sensor to count your steps while walking or jogging.
Just start the step counter application and put the pilot into your pant pocket or whatever you like. The sensitivity can be adjusted to match the different accelerations while walking, jogging or running
BlueBlocks BlueBlocks - BlueBlocks is the first real multiplayer Bluetooth game for PalmOS. It uses a so-called piconet to connect up to four palm PDAs into a bluetooth network. These four palms can then join each other in a multiplayer session of BlueBlocks.
The game has been developed and tested with a PalmOne M515 and a PalmOne Tungsten T
Mobile25 Mobile25 is a mapping application. It was meant to be used on our geocaching trips. The maps are stored as compressed bitmaps on memory card and e.g. the 1:100.000 (TOP100) and 1:25.000 (TOP25) maps of Baden-Wurttemberg, Germany together require about 700MB of memory card space.
Mobile25 supports bluetooth GPS devices and can display the current GPS position on the map
IR Ping IR Ping - This program allows to check the communication between a Palm III or a PalmPilot Professional with IrDA extension and other IrDA devices or another PalmPilot. The current version tries to access a IrCOMM port. This is present in most printers and Palm devices with PalmOS >= 3.3
The Grayscale Hack The Grayscale Hack - This is a utility for the Bodos PalmBoy and Phoinix Gameboy emulators. It may be useful for other applications as well.
This is a Hackmaster hack and requires the hackmaster application or a compatible replacement to be installed in order to work.
This hack allows the systems grayscale settings to be modified
PBrick PBrick - The PBrick library provides a API for bidirectional IR communication between the palm computing platform and the lego mindstorms RCX controller
IR Pong IR Pong - IR Pong is a two player action game for the Palm Pilot. You'll need a palm with infrared or bluetooth capabilities and a second person with a similar machine to play this game.
You can choose between nine different board layouts and adjust the level of difficulty as you get better
Mulg Mulg - Guide the marble through the maze and to the cross. Along the way you'll encounter stones blocking your passage, flipper bumpers, slippery ice, and several other obstacles. Be sure to visit Till's web site for hundreds of additional levels
