Lamp only displays a never-ending white screen which has no value expect that it can be used as a backup lamp. At the bottom of the screen, the battery percentage level is displayed.
No parameters, no special features - excepts that UP and DOWN buttons can be used to increase/decrease brightness. Tap on the screen to exit the application.
WARNING: if run unattended, this application can drain your mobile battery, as the device auto-off is disabled. Of course, default setting are restored when leaving the application
Like it? Share with your friends!
Supported operating systems:
Palm OS 3.x, Palm OS 4.x, Palm OS 5.x
Similar Software:
No Streak Hack No Streak Hack - Some Palm IIIx displays have the 'streaking' problem. They tend to extend vertical lines (can be seen in the datebook month view) . Sometimes this can be adjusted by reducing the contrast using the contrast adjustment wheel.
This problem can sometimes be solved with software by changing the display refresh frequency. The PalmOS 3.1
MirrorPro MirrorPro is another Mirror application for PalmOS.
It combines several featuresthat are unlikely to be found (at least not together) in other implementations:
It's freeware
Inmobile Lighter Inmobile Lighter - Mobile device lighter. Can you believe it?
Take it on your PALM to concerts, night clubs, parties etc.
Remember those concerts when you burnt your fingers when lighting a regular lighter? Or when the lighter didn't work? Or even when the wind used to constantly blow out your lighter?
Well, those days are over
Twinkle Twinkle Little Pix! Twinkle Twinkle Little Pix! can help you to check the Dead Pixel at your Color Screen
Torch-by-stone-age Torch-by-stone-age - Torch is the worlds smallest useful Palm app at 494 bytes! makes your screen as bright as possible through judicious choice of screen colouring (black)
Off by RedGrep Off by RedGrep adds two icons to the Menu Command Bar, Off icon and Backlight toggle icon.
You do not need to press the power button in order to switch the Palm off or to toggle the backlight.
Usefull for various cases that hide the power Button.
Off is a Preffs panel! It will not be visible from an application launcher
IIIcLight IIIcLight is a small utility that, when run, turns your whole screen white (colour models) or blank (other models).
This allows you to use your Palm as a torchlight.
For non-colour models, simply run the program and turn on the backlight.
This works best if your Palm has an old-fashioned style backlight
TinyMirror TinyMirror - Unlike other mirrors, TinyMirror uses the whole screen (there is no annoying menu bar to ruin your reflection).
TinyMirror can also display an all black or an all white screen.
You can toggle between the two by pressing the scroll buttons.
TinyMirror can also conveniently transform into a flashlight if the backlight is turned on
AppLight Hack AppLight Hack - control the Backlight state for a specific application
BacklightDAs BacklightDAs - instead of draining your battery because you THOUGHT you've turned off the backlight under that strong sunlight (and honestly, who can tell?) - download these DAs today!
You'll need a DA launcher to see and run these DAs once installed
Other Software by developer «Pierre Lescuyer»:
QuarkBox by Pierre QuarkBox by Pierre is a simulation of particles confined in a box, to observe effect of gravity on trajectories. Up to 100 particles can be added/removed using up/down hard buttons. Gravity can be tuned as in preferences.
This program requires Palm OS 3.5 or above. Color as well as Grayscale devices are supported
Polyedre by Pierre Polyedre by Pierre does nothing really useful. Pre-defined 3D grid volumes can be rotated around two axis using up / down / left / right hard buttons. This simple program was my first attempt for using Palm SDK graphic lib and hard button management.
Rotating step can be tuned through the Preferences.
This program works fine on Palm OS 3.5 and above
UmtsCrunch by Pierre UmtsCrunch by Pierre is a database for UMTS Release 5 specifications, the so-called 3rd generation telecommunication system. The Zip file contains a .PRC and a .PDB file which need to be both installed on the Palm.
The program allows any kind of search through the list of database entries.
The database only contains specification title and name
Metronome by Pierre Metronome by Pierre is a full featured electronic metronome.
Pulse volume, frequency and duration can be adjusted on a single screen.
In addition, Auto-off can be disabled (for usage over long period of time) and battery status can be displayed.
This program works fine on Palm OS 3.5 and above. Tested on the palm M and T series