IR Ping - This program allows to check the communication between a Palm III or a PalmPilot Professional with IrDA extension and other IrDA devices or another PalmPilot. The current version tries to access a IrCOMM port. This is present in most printers and Palm devices with PalmOS >= 3.3.
IR Ping uses the built-in IrDA stack of these devices and allows to play around with various IrDA functions and commands:
Discover - This command starts a discovery on the IrDA medium. All devices within the range are displayed with hardware address, hint bits and device name. The first device discovered will be used for the connect/test commands.
Connect IrLap - With 'Connect IrLap' a IrLap connection is set up to the first device discovered during the discovery.
Discon Irlap - Disconnect a running IrLap connection
Connect TP - Tries to set up a TinyTP connection. Therefore requests the receivers TinyTP-Lsap from the IAS data base of the receiver and on receipt requests the TinyTP connection.
Connect LMP - Sets up a IrLMP session. Requests the receivers IrLMP-Lsap from its IAS data base and requests a IrLMP connection. Some devices (e.g. the windows95 ir stack) have a short timeout between setup of the IrLap connection and the TP/LMP connection has to be set up shortly after the IrLap connection is established. Otherwise the device sends a disconnect.
TestReq - With this function a IrDA test is requested.
SendReq - The transmission of a data packet is requested. IR Ping sends 16 bytes (0x00, 0x01, 0x02 ... 0x0f) to the connected machine.
RxSize - The command displays the maximum packet size, the connected machine will transmit.
TxSize - This command displays the maximum paket size that can be transmitted.
DeviceName - This command requests the DeviceName from the receiver IAS data base. The answer is displayed with the next IAS callback.
All feedback, error and status information is displayed in a scrollable 80 lines buffer display.
What to do with this program?
This program is intended as a base for real IrDA applications. Just use IR Ping to check if your printer, cellular phone, notebook or PDA really talks the IrDA protocol and start writing an application like:
* printer driver for IR printer
* interactive (action) games
* internet communication over cellular phones
* backup, restore or HotSync to IrDA notebooks
* or just code segments like a selector box showing all IrDA devices in range and let the user select one
* ...
Like it? Share with your friends!
Supported operating systems:
Palm OS 3.x, Palm OS 4.x, Palm OS 5.x
Similar Software:
PalmAVR PalmAVR is the almost complete AVR In-System-Programming solution at the palm of your hand. It allows you to upload, download, verify, and identify ROM contents of any supported Atmel AVR microcontroller with your Palm OS powered handheld computer
JDatebook2HTML JDatebook2HTML - You have to report your working hours to your Chief or just want to share it with you colleague ?
A Desktop Application written in Java to export the internal DatebookDB (Creator: date, Type: data) of the Palm to HTML Files, that con be viewed with the browser of your choice. There will be one File for each Month where are events in
VersionMaster VersionMaster is a handy Windows utility that automatically finds, downloads, and installs any available updates for all your TealPoint apps
NSB Conduit Builder NSB Conduit Builder - NSB Condiut Builder allows you to create a true conduit for your NSB Palm application. You can HotSync with almost and database including MS Access, MS SQL, MySQL, PostgreSQL and many others. No modification of your existing application is required either
Pinger (Palm OS) Pinger (Palm OS) - lets you trade voice messages with anyone's mobile phone in over 20 countries. It's better than voicemail because there's no ringing or lengthy instructions. It's more personal than text because it's your own voice so there's no room to be misunderstood. Plus you can send a Pinger message to a group of people with just one call
Bike or Design Bike or Design - You can now create your own "Bike or Die" levels!
PocketC PocketC is all you need to create and run applications directly on your Palm OS-based device, no computer required. Create your source code in memo pad or a Doc editor, compile it with PocketC, and run your application directly from the PocketC application
ResistorCode ResistorCode is an application which makes it possible to determine the color code from the a resistor value or to determine the value of a resistor from its color code.
The majority of resistors types have color codes to indicate their values.
In this application we have established 3 types of resistors (4, 5 and 6 bands)
Other Software by developer «Till Harbaum»:
Mobile25 Mobile25 is a mapping application. It was meant to be used on our geocaching trips. The maps are stored as compressed bitmaps on memory card and e.g. the 1:100.000 (TOP100) and 1:25.000 (TOP25) maps of Baden-Wurttemberg, Germany together require about 700MB of memory card space.
Mobile25 supports bluetooth GPS devices and can display the current GPS position on the map
No Streak Hack No Streak Hack - Some Palm IIIx displays have the 'streaking' problem. They tend to extend vertical lines (can be seen in the datebook month view) . Sometimes this can be adjusted by reducing the contrast using the contrast adjustment wheel.
This problem can sometimes be solved with software by changing the display refresh frequency. The PalmOS 3.1
Real Freedom Real Freedom is a converter for Phoinix cartridge images. It can convert images from the format used by the Gameboy emulators Liberty (commercial) and Phoinix/PalmBoy (free) and gameboy cartridges stored on SmartMedia using the axxPac into the Phoinix format.
Currently the converter creates a blank RAM image for cartridges with built-in RAM
IR Pong IR Pong - IR Pong is a two player action game for the Palm Pilot. You'll need a palm with infrared or bluetooth capabilities and a second person with a similar machine to play this game.
You can choose between nine different board layouts and adjust the level of difficulty as you get better
Mulg Mulg - Guide the marble through the maze and to the cross. Along the way you'll encounter stones blocking your passage, flipper bumpers, slippery ice, and several other obstacles. Be sure to visit Till's web site for hundreds of additional levels
Argon V Argon V - Your objective is to survive as long as possible and to shoot down everything that moves. Avoid to crash into buildings, energy barriers, bombs and other ships, since this will damage you shield. Try to collect upgrades to increase the ship strength or to reduce damage
The Grayscale Hack The Grayscale Hack - This is a utility for the Bodos PalmBoy and Phoinix Gameboy emulators. It may be useful for other applications as well.
This is a Hackmaster hack and requires the hackmaster application or a compatible replacement to be installed in order to work.
This hack allows the systems grayscale settings to be modified
Battery Meter Hack Battery Meter Hack - This program replaces the battery symbol in the PalmOS launcher application with a customizable symbol and an additional value. This value can be configured to display the absolute battery voltage or the battery level in percent
