ScnCalibrate is the program for recalibrate the digitizer with one click.
Like it? Share with your friends!
Supported operating systems:
Palm OS 4.x, Palm OS 5.x
Similar Software:
TinyMirror TinyMirror - Unlike other mirrors, TinyMirror uses the whole screen (there is no annoying menu bar to ruin your reflection).
TinyMirror can also display an all black or an all white screen.
You can toggle between the two by pressing the scroll buttons.
TinyMirror can also conveniently transform into a flashlight if the backlight is turned on
FlashLight FlashLight is a simple application for the Palm OS for any device with a backlight
No Streak Hack No Streak Hack - Some Palm IIIx displays have the 'streaking' problem. They tend to extend vertical lines (can be seen in the datebook month view) . Sometimes this can be adjusted by reducing the contrast using the contrast adjustment wheel.
This problem can sometimes be solved with software by changing the display refresh frequency. The PalmOS 3.1
BrightnessDAs BrightnessDAs - with a stroke of your finger (depends on the DA launcher you're using and the options you choose to invoke my DAs) your could quickly choose between minimum brightness (great for reading at night), low (~20%, for battery-conscious users ;), medium (50%, should be enough for most situations) or maximum (100%. The range above 50% up to 100% is superfluous)
ZoomThis ZoomThis allows you to magnify portions of your handheld display. Use ZoomThis to magnify phone numbers, addresses, or any other information. ZoomThis is particularly useful when ambient light is low, and the backlight is not enough. Just tap two corners of the area you want to magnify! Works on PalmOS 3.5 or higher
BacklightDAs BacklightDAs - instead of draining your battery because you THOUGHT you've turned off the backlight under that strong sunlight (and honestly, who can tell?) - download these DAs today!
You'll need a DA launcher to see and run these DAs once installed
ReDigi ReDigi - ReDigi helps you to access the digitizer screen when your pen is severely misaligned.
Calibrate after a soft reset - Normally, after a soft reset, the Prefs screen will appear. With ReDigi, the calibration screen will show after a soft reset. This allows you to calibrate the digitizer
StayOn for Fossil WristPDA StayOn prevents the backlight from automatically turning off after 10 seconds of inactivity
Comments on ScnCalibrate:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
ScnCalibrate is compatible with your device IBM Workpad c505
