EVDash is a Palm OS application that acts as a set of dash board gauges for electric vehicles. It displays battery pack voltage, amps being drawn from the battery pack, and two different estimates of remaining battery capacity. It works with Xantrex's Link 10, formerly called the E-Meter. Just plug the Palm device into the E-Meter, preferably through an optical isolator to protect the Palm device and start the EVDash program.
- Voltage - Battery pack voltage.
- Amps - Amps being drawn from or put back into the battery pack.
- Capacity based on voltage - Capacity calculated from the pack voltage under very low load. Voltage drops off as pack capacity drops.
- Capacity based on amps - Capacity calculated from the amps drawn integrated over time compared to the pack capacity. The peukert effect is taken into account.
Once you install the EVDash.prc on the Palm pull down the menu and go to the setup window. Enter the pack capacity and the Peukerts constant. The state of charge voltages should be determined experimentally by recording the voltages as the battery pack is completely discharged.
To transfer ASCII data from your Palm, use the standard Hot sync cable and a terminal program. Set the following communications information:
Supported operating systems:
Palm OS 3.x, Palm OS 4.x, Palm OS 5.x
Similar Software:
KeyRotateHack for CLIE NR70 KeyRotateHack for CLIE NR70 - 'KeyRotate Hack' is a Hackmaster extension, which can improve keyboard input on SONY Clie NR70.
You can input digits and symbols that need 'Fn' key combination, just by pushing one key multiply
CableSync Hack CableSync Hack is a very small hackmaster hack that allows the user to hotsync by holding down either the up or down key while the power is turned on.
It is intended for users that have a cable, rather than a cradle.
CableSync Hack would also be appropriate for users that have remapped their hotsync button, or have a broken hotsync button
SortingHack SortingHack - This hack addresses a problem with the sorting in the Pilot.
Some characters used in the Nordic languages are not handled properly, i.e., they are not sorted in the proper order in the AddressBook for instance.
This hack fixes this problem for Danish, Finnish, Norwegian and Swedish
SideLightHack SideLightHack remembers and restores the side light state of your m505 (or m500)
UrlDA UrlDA is a DA to launch the specified URL from a database
DotNote Hack DotNote Hack - Wish you could touch-type on your Palm, or enter Graffiti more quickly? The onscreen keyboard is simply too little to be effective - there is no way to fit 26 letters and related buttons onto the small screen
AlwaysOnHack AlwaysOnHack - You can now focus on your activities without any interruption from the "autosleep" feature.
Useful when used with programs that require a password to start, even after an unexpected "autosleep" mode.
Hope it is useful
Alarm Manager Alarm Manager is a hack that adds repeatable and choosable alarms combined with a snooze dialog to your palmpilot
PButton If the device is switched off for at least the preset time then selected application is launched after next powering up using power button
FindHack FindHack is a replacement for the Palm OS Find function. It is compatible with handhelds based on Palm OS 3.3 to Palm OS 5.
Version 4.0 is a complete rewrite and works on Palm OS 3.3 through 5. Its powerful features make it an essential utility for everyday use
Other Software by developer «Peter Ohler»:
EV1Dash EV1Dash is a program for Palm OS devices that will collect data from the EV1 and display it on the Palm OS device display. The intent is to provide more information to the driver so that range and performance can be optimized. Here is one of the displays. There are two other displays
