BacklightDAs - instead of draining your battery because you THOUGHT you've turned off the backlight under that strong sunlight (and honestly, who can tell?) - download these DAs today!
You'll need a DA launcher to see and run these DAs once installed.
BacklightOnDA - Explicitly sets backlight to ON
BacklightOffDA - Explicitly sets backlight to OFF
Like it? Share with your friends!
Supported operating systems:
Palm OS 3.x, Palm OS 4.x, Palm OS 5.x
Similar Software:
MirrorPro MirrorPro is another Mirror application for PalmOS.
It combines several featuresthat are unlikely to be found (at least not together) in other implementations:
It's freeware
Backlight On Backlight On will turn on the backlight of your m505 every time you turn your Palm on.
Backlight On differs from the "official" Palm app in several ways:
-There is never any user interface. It just works, and doesn't need to be configured.
- It is much smaller (under 1Kb).
- It turns on the backlight everytime the m505 is turned on
Lamp Lamp only displays a never-ending white screen which has no value expect that it can be used as a backup lamp. At the bottom of the screen, the battery percentage level is displayed.
No parameters, no special features - excepts that UP and DOWN buttons can be used to increase/decrease brightness. Tap on the screen to exit the application
PalmMirror This is a simple mirror for palm and Sony Clie
ReDigi ReDigi - ReDigi helps you to access the digitizer screen when your pen is severely misaligned.
Calibrate after a soft reset - Normally, after a soft reset, the Prefs screen will appear. With ReDigi, the calibration screen will show after a soft reset. This allows you to calibrate the digitizer
Multi Backlight Hack Multi Backlight Hack - With Multi Backlight Hack you can now turn on/off the backlight, invert the backlight and still access the contrast panel, all from one button.
What's New in This Release:
· Added the option to have the screen invert when you hit the contrast button to active the backlight
StayOn for Fossil WristPDA StayOn prevents the backlight from automatically turning off after 10 seconds of inactivity
Reflecticus Reflecticus is a Mirror/Flashlight for Palm OS
BrightnessDAs BrightnessDAs - with a stroke of your finger (depends on the DA launcher you're using and the options you choose to invoke my DAs) your could quickly choose between minimum brightness (great for reading at night), low (~20%, for battery-conscious users ;), medium (50%, should be enough for most situations) or maximum (100%. The range above 50% up to 100% is superfluous)
Other Software by developer «Yuval Melamed»:
BrightnessDAs BrightnessDAs - with a stroke of your finger (depends on the DA launcher you're using and the options you choose to invoke my DAs) your could quickly choose between minimum brightness (great for reading at night), low (~20%, for battery-conscious users ;), medium (50%, should be enough for most situations) or maximum (100%. The range above 50% up to 100% is superfluous)
AutoOffExtender AutoOffExtender - AutoOff is when your device shuts itself off automatically after a specified period of user-inactivity, in order to conserve battery power.
AutoOffExtender can detect when your device is powered on after being off for less than a few seconds, and extend the auto-off time for that session, assuming you need more time to watch the screen with no action
LensWarning LensWarning - Tested under TH55 only - may work for others too.
LensWarning will remind you to cover the lens of your CLIE(R) device before running non-camera apps, or at power-off/on (configurable).
The warning is by LED and optionally a sound, and won't interfere with other programs or power off
PowerBright PowerBright allows you to toggle your brightness from maximum to minimum by holding the 'Power' button for a configured time.
You may also hold the Page-Down/Up buttons too, to adjust the brightness down/up respectively - the step value and treshold are configurable for your convenience
HoldSync HoldSync allows you to HotSync by holding one of your hardware buttons.
Enabled by default, it can't get any easier than that:
Hold first hardware button for 8/10 of a second and release to HotSync.
(You'll hear a confirmation sound after holding the button long enough) Disable by clearing the "Hold..
pTunesDA pTunesDA - displays the console window of Pocket Tunes if it's running in background & launches app if not.
(pTunes already has its own user-friendly means to show this console window, but users wanted DA...;)
pTunes/Pocket-Tunes is copyright of NormSoft, Inc
SafeRecs SafeRecs can either mask or hide your private records:
At power-off: If shown, private records will be made safe, and 'Security' will be launched (see Q&A).
Before 'normal' launching of applications under OS5+
When tapping the 'Find' silk-screen button (asks for password to continue, OS5+)
FindPrivate FindPrivate - If you're using the 'Find' on your PalmOS device, and if you also hide/mask private records, you may miss some search results that you'd like to see.
Not always you may remember to show private records prior to 'Find', and even if you do - it's a little bit cumbersome when you need your data fast
