Battery Monitor gives you quite an exact power consumption profile of your Pilot. BM monitors the total ON-time, how long the backlight (if you have one) was used and how long the serial port was active. If you're a user of Eco Hack, BM will also tell you, how much percent you saved by using Eco Hack. But that's not all: From the collected data, BM calculates the used energy and tells you, how much percent you spend on each of the functions. Since BM also detects automatically when you changed batteries, it stores the date and a complete previous consumption profile. From the total time the batteries are in use, BM also calculates, how much of your batteries are used while your Pilot is 'sleeping'. BM has a 3 week full functional trial period.
· 3 weeks trial
What's New in This Release:
· - Added a new setting for TRG's new SPII-XL 8MB memory board (BTW, a phantastic piece of hardware!). - Finally the export function is implemented. You can save your battery data in the memo pad now. - Changed the total time-in-use display. It now has the format days:hrs:min:sec, alot of people asked for it - well, now you got it.
Like it? Share with your friends!
Supported operating systems:
Palm OS 3.x, Palm OS 4.x, Palm OS 5.x
Similar Software:
Michau's Battery Meter Michau's Battery Meter is probably the only PalmOS utility that tells you how long your battery will last until you need to recharge it. Need to use your PDA for a long time without a charger? Check if your batteries won't dry out before you finish your work!
Another feature is the battery icon in menu bar
Battery Panel Battery Panel is a system preference panel which displays the current battery settings.
If your handheld supports user changeable batteries (Alkaline, NiCad), the battery type can be chosen. Also the warning and critical (shut off) voltages can be set. All settings will survive a soft reset
NoLoBatHack NoLoBatHack replaces the System Battery Low Warning dialog by inverting an area of the screen and optionally displaying the battery voltage.
You can also blink the inverting area to really catch your attention.
You can set the warning area and the position of the battery voltage text via the configuration screens
BatteryTrace BatteryTrace can monitor your battery life
PDA Check PDA Check is a utility to display various system information.
The information is grouped into categories - battery, display, memory, Palm OS, processor, ROM and vendor.
Simply select an item from the drop down box, and the relevant information will be displayed.
What's New in This Release:
· Added minimum Palm OS version checking
LowBatteryIndicator Hack LowBatteryIndicator Hack - Tired of the Low Battery Window popping up and requiring you to tap OK to continue?
LowBatteryIndicator Hack displays for a second a little message in the bottom corner when the battery is low, and then dissapears
Battery TIME Test the power of the battery in your PALM
BatteryStatus BatteryStatus - This simple application displays a message box when charging was completed for Kyocera QCP 6035 smartphone.
Since this equipment does not have any indication whether charging complted or not, I wrote this program.
This also has a stand alone UI to display type of battery and how much charge exists (in %)
Eco Hack Eco Hack saves 30-40% of your battery by decreasing the system clock of the CPU
Beam Receive Toggle Hack Beam Receive Toggle Hack - An effective way to prolong battery life in your PDA is to disable the Beam Receive function except when explicitly using it to receive data
Other Software by developer «Peter Strobel»:
Voltage Calibration Voltage Calibration - Do you think the volt meter in your Palm is way off? Are you changing your batteries too early? You have a digital voltmeter? Or at least a friend with a voltmeter? Try out Voltage Calibration then.
It allows you to compensate the error of the internal voltmeter of any Palm (works for all OS)
Voltage Display Do you miss a digital readout of the battery voltage in the default app laucher? Voltage Display does exactly that
