IR Ping - This program allows to check the communication between a Palm III or a PalmPilot Professional with IrDA extension and other IrDA devices or another PalmPilot. The current version tries to access a IrCOMM port. This is present in most printers and Palm devices with PalmOS >= 3.3.
IR Ping uses the built-in IrDA stack of these devices and allows to play around with various IrDA functions and commands:
Discover - This command starts a discovery on the IrDA medium. All devices within the range are displayed with hardware address, hint bits and device name. The first device discovered will be used for the connect/test commands.
Connect IrLap - With 'Connect IrLap' a IrLap connection is set up to the first device discovered during the discovery.
Discon Irlap - Disconnect a running IrLap connection
Connect TP - Tries to set up a TinyTP connection. Therefore requests the receivers TinyTP-Lsap from the IAS data base of the receiver and on receipt requests the TinyTP connection.
Connect LMP - Sets up a IrLMP session. Requests the receivers IrLMP-Lsap from its IAS data base and requests a IrLMP connection. Some devices (e.g. the windows95 ir stack) have a short timeout between setup of the IrLap connection and the TP/LMP connection has to be set up shortly after the IrLap connection is established. Otherwise the device sends a disconnect.
TestReq - With this function a IrDA test is requested.
SendReq - The transmission of a data packet is requested. IR Ping sends 16 bytes (0x00, 0x01, 0x02 ... 0x0f) to the connected machine.
RxSize - The command displays the maximum packet size, the connected machine will transmit.
TxSize - This command displays the maximum paket size that can be transmitted.
DeviceName - This command requests the DeviceName from the receiver IAS data base. The answer is displayed with the next IAS callback.
All feedback, error and status information is displayed in a scrollable 80 lines buffer display.
What to do with this program?
This program is intended as a base for real IrDA applications. Just use IR Ping to check if your printer, cellular phone, notebook or PDA really talks the IrDA protocol and start writing an application like:
* printer driver for IR printer
* interactive (action) games
* internet communication over cellular phones
* backup, restore or HotSync to IrDA notebooks
* or just code segments like a selector box showing all IrDA devices in range and let the user select one
* ...
Like it? Share with your friends!
Supported operating systems:
Palm OS 3.x, Palm OS 4.x, Palm OS 5.x
Similar Software:
Razor! Gaming Engine Razor! Gaming Engine - Razor! is a development framework for games.
It can be used with both CodeWarrior and PRC Tools 2.0.
It supports sprites, music, hard keys, timing, events..
ED PLua IDE ED PLua IDE - Use this Development Environment to create Palm pda applications (or even games) by taking advantage of the LUA language.
This IDE is designed to work with the interpreter/compiler PLua, PLua itself comes with an IDE but this one is limited to the palm platform, that's why I decided to write an IDE for windows
PilRC PilRC is a Platform Independant program (sources are provided) for developing Palm Computing Platform applications.
It takes a resource script file and emits one or more binary resource files which are then included by your project's .rc, .asm or other resource file.
Let me know if you run into any bugs, have feature suggestions or whatever
RegCode RegCode is just the thing you need to boost sales of your Palm OS application! RegCode generates a registration code based on a user's HotSync ID which encourages each user to pay for their own copy of your app. The small investment you make in RegCode will quickly be recouped
PocketC PocketC is all you need to create and run applications directly on your Palm OS-based device, no computer required. Create your source code in memo pad or a Doc editor, compile it with PocketC, and run your application directly from the PocketC application
SuperOptimize SuperOptimize is a package to shrink, obfuscate and optimize your Java code for SuperWaba. The resulting files will be smaller, obfuscated, and heavily optimized
JDatebook2CSVCat JDatebook2CSVCat - A small framework written in java to list the internal DatebookDB (Creator: date, Type: data) of the Palm. It is compatible with PalmOS 2.0 or better. PalmOS 1.0 should work too, but isn't tested. Up to now, the format of the DatebookDB has not been changed
Kernel for Palm PDB Kernel for Palm PDB - recovers corrupted .PDB (Database file for the Palm handheld organizer) database files corrupted due to unexpected palm pilot shutdown, palm organizers synchronization break, HotSysnc failure and displays error messages
Proview Proview is a development tool that creates hierarchical and flat views from profiling data created with the POSE emulator.
Find out exactly where your software is spending its execution time and remove performance bottlenecks in your software
Other Software by developer «Till Harbaum»:
No Streak Hack No Streak Hack - Some Palm IIIx displays have the 'streaking' problem. They tend to extend vertical lines (can be seen in the datebook month view) . Sometimes this can be adjusted by reducing the contrast using the contrast adjustment wheel.
This problem can sometimes be solved with software by changing the display refresh frequency. The PalmOS 3.1
Step Counter Step Counter - This program needs the tilt sensor modification to work, it uses the acceleration sensor to count your steps while walking or jogging.
Just start the step counter application and put the pilot into your pant pocket or whatever you like. The sensitivity can be adjusted to match the different accelerations while walking, jogging or running
PBrick PBrick - The PBrick library provides a API for bidirectional IR communication between the palm computing platform and the lego mindstorms RCX controller
BlueBlocks BlueBlocks - BlueBlocks is the first real multiplayer Bluetooth game for PalmOS. It uses a so-called piconet to connect up to four palm PDAs into a bluetooth network. These four palms can then join each other in a multiplayer session of BlueBlocks.
The game has been developed and tested with a PalmOne M515 and a PalmOne Tungsten T
Mobile25 Mobile25 is a mapping application. It was meant to be used on our geocaching trips. The maps are stored as compressed bitmaps on memory card and e.g. the 1:100.000 (TOP100) and 1:25.000 (TOP25) maps of Baden-Wurttemberg, Germany together require about 700MB of memory card space.
Mobile25 supports bluetooth GPS devices and can display the current GPS position on the map
Argon V Argon V - Your objective is to survive as long as possible and to shoot down everything that moves. Avoid to crash into buildings, energy barriers, bombs and other ships, since this will damage you shield. Try to collect upgrades to increase the ship strength or to reduce damage
Real Freedom Real Freedom is a converter for Phoinix cartridge images. It can convert images from the format used by the Gameboy emulators Liberty (commercial) and Phoinix/PalmBoy (free) and gameboy cartridges stored on SmartMedia using the axxPac into the Phoinix format.
Currently the converter creates a blank RAM image for cartridges with built-in RAM
The Grayscale Hack The Grayscale Hack - This is a utility for the Bodos PalmBoy and Phoinix Gameboy emulators. It may be useful for other applications as well.
This is a Hackmaster hack and requires the hackmaster application or a compatible replacement to be installed in order to work.
This hack allows the systems grayscale settings to be modified
