No Streak Hack - Some Palm IIIx displays have the 'streaking' problem. They tend to extend vertical lines (can be seen in the datebook month view) . Sometimes this can be adjusted by reducing the contrast using the contrast adjustment wheel.
This problem can sometimes be solved with software by changing the display refresh frequency. The PalmOS 3.1.1 upgrade and other programs cure this.
Flickering greyscale on the Palm IIIx and Handspring Visors
In order to prevent streaking, the PalmOS 3.1.1 upgrade and all later OS versions for the Palm IIIx and some old models of the Handspring Visor (not the prism or the platinum) reduce the screen refresh rate like this hack does.
Reducing the refresh rate has one major disadvantage: Greyscale pixels are generated by turning the pixels on and off very fast by the video controller. Together with the reduced screen refresh rate of the Palm IIIx and some Visors, this causes visible flicker in greyscale video modes used by some games and e.g. programs like AvantGo.
It is possible to setup nostreak to disable the anti-streaking code in these OS versions. In order to prevent flickering greyscale modes in e.g. programs like PalmBoy on the Palm IIIx and the Handspring Visor, install nostreak, start the hackmaster application, go to the nostreak setup (the small '+') and set the refresh rate to '0' and select 'enable in greyscale mode'. After that you might need to re-adjust the contrast setting, but the flickering in greyscale applications will be gone.
This disables the anti-streaking features of PalmOS and you might see streaking on your Palm IIIx or Visor after this. There is no way to reduce streaking and to avoid flickering greyscale at the same time.
What's New in This Release:
· Version 1.3 can be activated for greyscale modes separately
Like it? Share with your friends!
Requirements:HackMaster
Supported operating systems:
Palm OS 3.x, Palm OS 4.x, Palm OS 5.x
Similar Software:
Colour Bundle Colour Bundle - comprises 3 simple applications:
(1) Light
This application changes your Palm OS handheld screen into all white and functions as a torch-light in the dark.
(Work in Palm OS colour handheld only)
(2) Mirror
This application changes your Palm OS handheld screen into all black and functions as a mirror when needed
StayOn for Fossil WristPDA StayOn prevents the backlight from automatically turning off after 10 seconds of inactivity
ReDigi ReDigi - ReDigi helps you to access the digitizer screen when your pen is severely misaligned.
Calibrate after a soft reset - Normally, after a soft reset, the Prefs screen will appear. With ReDigi, the calibration screen will show after a soft reset. This allows you to calibrate the digitizer
Off by RedGrep Off by RedGrep adds two icons to the Menu Command Bar, Off icon and Backlight toggle icon.
You do not need to press the power button in order to switch the Palm off or to toggle the backlight.
Usefull for various cases that hide the power Button.
Off is a Preffs panel! It will not be visible from an application launcher
Torch-by-stone-age Torch-by-stone-age - Torch is the worlds smallest useful Palm app at 494 bytes! makes your screen as bright as possible through judicious choice of screen colouring (black)
da mirror da mirror - how's my hair?? is there food on my face?? is there a hot dog wedged in my hair?? now you can know the answer to these questions and many more!! perfect for places with a hard to find mirror, school, meetings, etc. da mirror turns your palm handheld's screen black so you are able to see your reflection
BacklightDAs BacklightDAs - instead of draining your battery because you THOUGHT you've turned off the backlight under that strong sunlight (and honestly, who can tell?) - download these DAs today!
You'll need a DA launcher to see and run these DAs once installed
Twinkle Twinkle Little Pix! Twinkle Twinkle Little Pix! can help you to check the Dead Pixel at your Color Screen
MirrorPro MirrorPro is another Mirror application for PalmOS.
It combines several featuresthat are unlikely to be found (at least not together) in other implementations:
It's freeware
Other Software by developer «Till Harbaum»:
BlueBlocks BlueBlocks - BlueBlocks is the first real multiplayer Bluetooth game for PalmOS. It uses a so-called piconet to connect up to four palm PDAs into a bluetooth network. These four palms can then join each other in a multiplayer session of BlueBlocks.
The game has been developed and tested with a PalmOne M515 and a PalmOne Tungsten T
Argon V Argon V - Your objective is to survive as long as possible and to shoot down everything that moves. Avoid to crash into buildings, energy barriers, bombs and other ships, since this will damage you shield. Try to collect upgrades to increase the ship strength or to reduce damage
PBrick PBrick - The PBrick library provides a API for bidirectional IR communication between the palm computing platform and the lego mindstorms RCX controller
IR Ping IR Ping - This program allows to check the communication between a Palm III or a PalmPilot Professional with IrDA extension and other IrDA devices or another PalmPilot. The current version tries to access a IrCOMM port. This is present in most printers and Palm devices with PalmOS >= 3.3
Mulg Mulg - Guide the marble through the maze and to the cross. Along the way you'll encounter stones blocking your passage, flipper bumpers, slippery ice, and several other obstacles. Be sure to visit Till's web site for hundreds of additional levels
Battery Meter Hack Battery Meter Hack - This program replaces the battery symbol in the PalmOS launcher application with a customizable symbol and an additional value. This value can be configured to display the absolute battery voltage or the battery level in percent
The Grayscale Hack The Grayscale Hack - This is a utility for the Bodos PalmBoy and Phoinix Gameboy emulators. It may be useful for other applications as well.
This is a Hackmaster hack and requires the hackmaster application or a compatible replacement to be installed in order to work.
This hack allows the systems grayscale settings to be modified
Mobile25 Mobile25 is a mapping application. It was meant to be used on our geocaching trips. The maps are stored as compressed bitmaps on memory card and e.g. the 1:100.000 (TOP100) and 1:25.000 (TOP25) maps of Baden-Wurttemberg, Germany together require about 700MB of memory card space.
Mobile25 supports bluetooth GPS devices and can display the current GPS position on the map
Step Counter Step Counter - This program needs the tilt sensor modification to work, it uses the acceleration sensor to count your steps while walking or jogging.
Just start the step counter application and put the pilot into your pant pocket or whatever you like. The sensitivity can be adjusted to match the different accelerations while walking, jogging or running
