LeoCpuSpeed is an app to control the speed of the CPU. Started out as a test to determine if the "1ghz hack" was genuine or not, and ended up to be able to control cpu speed and to overclock to some degree.
Notes on auto-apply speed at startup
1) Disable autoscaling
2) Select the cpu speed you want
3) Menu > Apply speed at boot
Notes on overclocking
1) Obviously overclocking is completely at your own risk, as you could harm your device. Luckily, in most cases, your device will just lock up and you'll need to restart your device (remove battery, re-insert and turn on again).
2) The green buttons were the overclock settings that have been successful 9 out of 10 times. The orange speeds have been successful like 5 out of 10 times. The red speeds have never worked for me yet.
3) The higher the speed, the more unstable. This is mainly because I don't have a way to increase voltage of the core.
4) Overclocking only works on AC power! When on battery power, the overclock will work but will be undone within 500 milliseconds by the OS. Something within the OS, or a driver, or the radio rom, enforces the proper CPU speed every 500ms.
Notes on battery
I have seen only very very miniscule differences on battery usage when using 998MHz all the time. You really wouldn't notice the difference if it were at 998MHz all the time, or at 768MHz (default). The only thing you _do_ notice, is that it feels snappier.
Try playing a decent movie in TCPMP or coreplayer with autoscaling on, and try again with autoscaling off and at 998mhz. Huge difference. (Note that some ROMs already have autoscaling disabled and will run at 998MHz all the time, like CleanEX. You won't notice a difference there obviously.)
· Updates CPU speed every half second (calculated from the processor registered directly! not from some driver)
· Can stress the CPU to show you that it goes up to 998mhz under load (when idle speed is less than 998mhz)
· Disable autoscaling so that you can control the speed yourself
· Select the speed you want by moving the slider or pressing 768/998 presets
· Automatically disable autoscaling and set speed at boot (via menu)
· Overclocking
What's New in This Release:
· For advanced users only: call LeoAutoCpuSpeed.exe with a custom performance level to set that speed (and disable autoscaling if enabled). So, calling "LeoAutoCpuSpeed 12" will set it to 768MHz. And FYI, 18 = 998MHz.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Requirements:HTC Leo
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional, Windows Mobile 6.5 Professional
Similar Software:
Advanced Configuration Tool Featuring Appearance tweaks, Performance tweaks, Phone tweaks, Connections tweaks, SoftKeys changing and many more !
nueMassStorage NueMassStorage enables you to use your device as a USB Flash Reader, giving you direct access to your flash drive on computers or other devices that don't have Activesync
VJTodayButton VJTodayButton - This simple app needs to be assigned to a Hardware Key using the control panel.
Then, when the assigned hardware button is pressed, the PDA will switch from your current application to the Today Screen. When you let go of the assigned key, it will jump back to the application you were previously in
Shocktester Shocktester - To use the G-Sensor the right way or test your application, you need to know how exactly the x, y and z axes are reacting. For this purpose Shocktester was designed.
What's New in This Release:
· you can set it to keep the data scrolling even if no angle change was done
Kai's Touch Scrollbar.Net Kai's Touch Scrollbar.Net - Change the width of the vertical Scrollbar so, that you can handle it with your fingers. The width of the Scrollbar will be changed thoughout all applications in the system
VJBigPhone VJBigPhone - This small program is used to reformat the Phone Dialer that gets all shrunk down after applying the VGA hack.
It will allow the phone to be usable in VGA mode
What's New in This Release:
· added internal international support. No international command line required
SysInfoCe This little aplication just view hardware and software parameters
nueUSBKeyboard nueUSBKeyboard - nueUSBKeyboard turns your mobile device into a real USB HID Keyboard, allowing you to use your device's keyboard (or soft keyboard) to enter text, control the BIOS, etc on your computer, or other USB Host that accepts HID Keyboards (i.e. Playstation3, XBOX360, etc.)
FileDuplicator FileDuplicator - This program allows you to select a text file on your PocketPC. Then you enter the number of copies you want of the 'template' file made and writes them with a number suffix.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
Other Software by developer «Martijn Stolk»:
KeypadLedControl KeypadLedControl By default the keypad lights turn off after 10 seconds when the device comes out of standby. This little application keeps the light on while the display is on
Msm7kCpuSpeed Msm7kCpuSpeed - An application for overclocking the MSM7k SoC on the Raphael. The same processor is present on the Diamond, Rhodium and the Topaz, so it should work on all of these devices. It was able to underclock to 57MHz and overclock up to 710MHz, using small 19.2MHz steps
TorchButton TorchButton Dropped your keys? Finding something behind the bench? Performing surgery on a computer and need to find that jumper on the mainboard?
This is a simple application built for some HTC devices that have a hardware LED, normally used to take pictures in the dark. However the LED can be used as a handy pocket flashlight
LeoExtendedNotifications LeoExtendedNotifications is a small app that blinks the keypad when there are notifications.
If you also use KeypadLedControl, you may get some irregular blinking during notifications. Nothing serious
