nueClockControl - nueClockControl allows you to change the clock speed of your Qualcomm MSM7XXX(A) based mobile device.
Although overclocking is not possible yet, you can set the frequency of the ARM11 core to the preset ranges between 19.20 MHz and 528.00 MHz for MSM7x01A (384.00 MHz for MSM7x00). Note that Device Information always displays 528.00 MHz or 400.00MHz, so you should use nueClockControl to gauge your current device frequency.
There is also a command line mode:
nueClockControl.exe setting
where setting is a number from 0-7, corresponding to frequencies in the combobox. 7 is 528.00 MHz and 0 is 19.20 MHz. The numbers are different on the MSM7x00 400MHz parts.
Also note that it currently cannot determine the voltage level for non-A parts.
What's New in This Release:
· Added support for MSM7500/MSM7200, Added voltage level form MSM7501A/MSM7201A
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Pocket PC 2002, Windows Mobile 2003, Windows Mobile 5.0
Similar Software:
SwellDisk Maximize Capacity SwellDisk is a revolutionary low cost solution for million of users around the world to dramatically maximize the capacity of their storage card
SuperCleaner SuperCleaner clean your Pocket PC from unnecessary files
VipMSCRexe VipMSCRexe - VipMSCRexe is a utility to run MortScript without Assigning .mscr extension to MortScript.exe
How to Use it
Rename exe to your scriptname.exe e.g if your script name is sashimi.mscr then rename this VipMSCRexe.exe to sashimi.exe
This utility will first find MortScript
VJTrayLaunch VJTrayLaunch - This program is used to launch any application from the Today Tray.
VJTrayLaunch is only for launching a small number of apps. Don't use it for 15 etc (due to the 32 task limit on WM).
This is a command line application, and can be used to launch any program or shortcut
VoiceCentral 3.1 WM5 PPC VoiceCentral 3.1 WM5 PPC - Finalist in the "Speech" category at Pocket PC magazine's 2005, Fifth Annual Best Software Awards With Fonix VoiceCentral, true mobility is now possible through the power of speech
PortTranzit COM-port redirector for Windows Mobile
HTC CM Killer HTC CM Killer is a fully automated cab file to completely remove and replace the stock HTC_CM_Guardian.exe with a dummy file. It should work on any HTC device.
HTC_CM_Guardian is a process locked into stock HTC roms (carrier specific???)
this process appears to only monitor certain registry/phone settings, reverting any change back to factory default
VJEschaton VJEschaton - This program is used to soft reset, hard reset, toggle display, toggle LEDs (possibly!) and get Uptime for your PDA.
Note: It will hard reset. Please use this carefully.
Beta version:
For no good reason at all, I've tried to implement a sleep/power off mode
VJPhoneShortcuts VJPhoneShortcuts - Install this app to have a shortcut to the Call History screen and the Speed Dialer Screen on WM5 devices.
Current Tools:
-Enable Speaker Phone
-Jump to SpeedDialer
-Jump to CallHistory
-Load Inbox and check Pop Email (you must be in the Email account to use this, eg not in SMS account. This will be improved in the future
Other Software by developer «No2Chem»:
nueSIPStylus nueSIPStylus - nueSIPStylus automatically changes the input method / software input panel (SIP) based on whether the stylus is in or out. Note that you must have a device that comes with a stylus sensor (Touch Diamond, Touch Pro, Touch HD, etc...) for this program to work
nueSlidingKB nueSlidingKB - nueSlidingKB is a system service that automatically switches between keyboards when you slide your Windows Mobile device open. This is convenient so that the SIP does not take so much space when you open your keyboard. nueSlidingKB also comes with a control panel so you can define sliding sound and keyboard parameters
nueRecMod nueRecMod - nueRecMod is an updated version of RecMod. nueRecMod recovers files from modules in the format Imgfstools outputs them in (S000, etc). It is based on RecMod by mamaich. However, this version is lighter and properly sets the imagebase, which is especially important when disassembling via IDA
nueNullKB nueNullKB - nueNullKB is a new version of nullKB which does not require ATL and supports VGA devices (i.e. the icon is not stretched out anymore).
If you want to change the icon, use a resource hacker – the first icon is a 32x32 icon for VGA devices and the second icon is a 16x16 icon for QVGA devices
nueSIPDefault nueSIPDefault - nueSIPDefault automatically selects the default input method at startup. It is very lightweight and implemented as a service dll which unloads itself after it is done processing. It also has a configurable wait time to adjust for new versions of Windows Mobile that adjust the default SIP sometime during boot
nueTTY-Console nueTTY-Console - nueTTY-Console is an utility to communicate with HTC-branded Windows CE devices in bootloader mode. It uses the WinUSB library to communicate with the device. Currently only working in Windows Vista.
WARNING!!!
Some commands can damage or destroy ("brick") your device
nueFont NueFont is a utility that lets you adjust system fonts
nueAudio NueAudio is a tool for editing audiopara.csv, the file which controls internal audio parameters for HTC devices
nueLED nueLED - nueLED is a LED intermediate driver that sits between the LED driver (ALLLEDMGR) and controls which LEDS are signaled. nueLED can also redirect LED signals to another LED, for instance, the signal light to the bluetooth light. nueLED is compatible with all HTC devices that use ALLLEDMGR as the LED control driver, although the LED addresses may differ between devices
nueMassStorage NueMassStorage enables you to use your device as a USB Flash Reader, giving you direct access to your flash drive on computers or other devices that don't have Activesync
