NetDetect - Network signal detector for mobile phones.
Sounds an alert to let you know when the network becomes available without you needing to keep looking at the phone. Useful and safer while travelling in poor signal areas.
Can be used where the network signal is variable/patchy to provide an audio indication of current status without user needing to look at the phone or press any keys.
e.g. where there is a need to make an urgent call or send a text but a signal is not available. The user can walk/drive to a different location. The audio sound alerts the user who can then safely stop and use the phone at the next convenient and safe place.
Checks whether the phone data network is available and sounds an alert when network signal first detected. Can also be asked to continue checking periodically and to alert you when the signal is lost and regained. Has different alert sounds allowing you to know the current state without needing to look at the phone.
The Alert Mode can be set to your preferred mode, eg once only until network found, repeated checking for an up to date status, or only by command. Your chosen setting is saved and reused each the application is run. Whichever Alert Mode is chosen, commands are also available to immediately start or stop network detection.
Volume, alternative sounds and other settings are selected in the main setup menu.
WARNING. It is unsafe to use a mobile phone while driving. Please check the laws regarding use of mobile phones, hands-on or hands-free that apply in your country. If in doubt DO NOT USE MOBILE PHONE WHILE DRIVING or in any other situation where lack of concentration or control is dangerous.
NetDetect Connects to the data network (eg. GPRS or EDGE), but does not generate any data. The default Alert Mode setting (When OK), will stop as soon as a connection is made. In other Alert Modes, NetDetect may make frequent short connections to the data network. However no data is sent or received across the network by NetDetect. Many network providers only charge by the amount of data transmitted in which case NetDetect will not cost anything to use. Some providers may make a small connection charge or have a fixed monthly scheme. Larger charges may be applied when roaming.
Please check your network provider for likely costs. If in doubt, you can keep the default Alert Mode (When OK) or set (On Command) which will only make one connection when the application is run. If your network does charge per connection, but you want to be continually notified of network availability, you should be able to change your phone settings to ensure the data network is always on. This will allow NetDetect to use any existing connection and not need to make a separate connection each time it needs to check network availability.
Features
Alert Mode: The Alert Mode can be set to your preferred mode. Your chosen setting is saved and reused each the application is run. Whichever Alert Mode is chosen, commands are also available to immediately start or stop network detection. A built in timer automatically switches off detection after two hours.
When OK When network is currently unavailable, this option will cause frequent network checks to occur until a signal has been found at which time an alert will be sounded.
eg. You want to make call or send an SMS, but there is no network signal where you are.
1) enable When OK
2) walk/drive... until alert sounds
3) Stop and make call
When OK & Lost Continously checks for a network signal every 30s. Sounds a positive alert if a network has now been found. Sounds a negative alert if the network has now been lost. Phone user can stop further detections by command at any time.
eg. You want to make call but there is no network.
1) enable When OK & Lost
2) walk/drive...
3) positive alert sounds (network now available) but unable to stop at the moment
4) walk/drive some more
5)negative alert sounds (network lost again)
6) walk/drive some more
7) positive alert sounds (network available again), stop and make call.
Repeat Alert As for When OK & Lost but also repeats the sound (positive alert or negative alert) every minute.
On Command Finds state of network only when actually requested by use of the Check command.
Volume: The volume of some of the sounds can be changed. Volume may also be dependent on the phone's normal volume settings.
Network OK Sound: One of the available sounds can be selected to be sound an alert when the network is detected. Some phones may not be able to use all of these alternative sounds. If the default sound is not heard, try the others. Once a sound has been selected, the application will remember it and use it again the next time the application is started.
Network Lost Sound: As above but used when the network is lost.
Vibrate: Vibrates when alert sounded if your phone supports this feature. This can be combined with lowest volume setting to provide silent alerts.
Flash: Flashes backlight if your phone supports this feature.
Auto Save: The above settings are saved on application exit and remembered for use next time the application is started. Auto Save also occurs if an incoming phone call is received.
Like it? Share with your friends!
Requirements:· Java MIDP 2.0
Supported operating systems:
Java ME, Java Nokia 240x320, Java SE 240x320
Similar Software:
Subnet Subnet - The Subnet mobile application performs Major Subnetting Tasks for your network anytime anywhere. The application has been designed especially for mobile users. Users can subnet their network, perform minor or major network Subnetting calculations and also can gain information about the network
PaderSyncSSH PaderSyncSSH is a powerful SSH client for mobile devices. You can use it to access your SSH servers at home or at work with your mobile device.
Terminal Emulation
With the integrated VT100 terminal emulator you can connect multiple terminal windows, execute programs and manage the remote system
eMobiStudio - Networkacc v2.8 eMobiStudio - Networkacc v2.8 - NetworkAcc allows you to fine-tune your mobile network settings to achieve optimal network performance out of your current hardware. All you need to do is providing some basic information about your network. NetworkAcc will use that information to analyze your mobile system and then adjust your network settings accordingly
SubnetCalc ME SubnetCalc ME is a simple application to calculate subnets. Given the IP address and the mask, it will tell you the number of subnets and hosts. Also, it will display subnet's information (network and broadcast addresses, host range). This version only works with class C addresses
InfoTime Luminesc InfoTime Luminesc - It is not always easy to see the time on mobile phones. Often, the time is shown in a small font in digital format (eg. 08:30) which can be difficult to read correctly
Listango Listango - List manager for mobile phones.
Create and manage lists or sets of data on your mobile phone. Manage single or multiple lists. Create, view, edit records and delete individual or all records.
Keep your favourite lists with you at all times on your mobile phone
KCal Calorie Counter application for mobile phonesCreate your own on-the-go database of calories and nutrition information for a variety of everyday food and drink. KCal comes pre-installed with a mini hamper containing over 100 of our favourite every day foods, such as cereal, bread, vegetables, fruit and meat
FilmQM FilmQM - Film and film star quiz for mobile phones from Ticki.com, the makers of QuizMaster.
· High Scores: You can do the quiz as many times as you like. Your 10 highest scores are entered into the high score table saved on your phone. Your friends can play too, and add their name and score to your high score table
Interango Interango - What does it do? - It times intervals or exercise routines providing an audio and large digit display prompt for each interval phase. Shows elapsed time and remaining time to complete the phase. Optionally provides a countdown to the next exercise or rest period
KCal KCal - Calorie Counter application for mobile phones
Create your own on-the-go database of calories and nutrition information for a variety of everyday food and drink. KCal comes pre-installed with a mini hamper containing over 100 of our favourite every day foods, such as cereal, bread, vegetables, fruit and meat
KCalLite (Java) KCal by Infologic is a calorie counter application for mobile phones. An on-the-go database of calories and nutrition information for a variety of everyday food and drink.
Search the 'Hamper' of food for a particular item, or add your own nutrition information to the database
InfoTime Luminesc InfoTime Luminesc - Mobile phone time application in a number of catchy styles. All styles include adjustable hand sizes for ease of use. This model offers a strongly contrasting luminous effect.
It is not always easy to see the time on mobile phones. Often, the time is shown in a small font in digital format (eg. 08:30) which can be difficult to read correctly
InfoTime InfoTime- watch with multiple alarms, choice of style faces, adjustable hand sizes, alternative sounds.
New - support for Touch Screen handsets
All styles include adjustable hand sizes for ease of use
It is not always easy to see the time on mobile phones. Often, the time is shown in a small font in digital format (eg
InfoTime Black Magic InfoTime Black Magic - Mobile phone time application in a number of catchy styles. All styles include adjustable hand sizes for ease of use. See what happens when you select different numbers on the keypad. Try out different combinations, unlock the secrets and generate your own backgrounds.
It is not always easy to see the time on mobile phones
