TiltLander is a simple project to demonstrate accelerometer use in Android. It's just the Android Lunar Lander demo, with the accelerometer hooked up to control the tilt of the lander.
How to play
You have to land the lander on the landing pad, which is shown as a green line at the bottom of the screen. (The actual position changes at random.) Sounds easy, but:
* You must be moving slowly -- see your speed at the top middle of the screen
* You must be reasonably level
* You must be completely on the landing pad
You can control your descent by firing your engine. The engine always pushes you in the direction you are pointing, so by tilting the lander, you can also control your side-to-side movement. But watch out -- fuel is limited. Your fuel state is shown at the top left of the screen.
You can fire the engines by pressing the trackball button or touching the screen; control the angle of the lander by tilting the phone. But note: rotating the lander does nothing in itself; to move sideways, you need to point in the direction you want to go and fire the engine.
What's New in This Release:
· Allow install to SD card.
Like it? Share with your friends!
Supported operating systems:
Google Android 1.6, Google Android 10.x, Google Android 2.0, Google Android 2.1, Google Android 2.2, Google Android 2.3, Google Android 3.0, Google Android 3.1, Google Android 3.2, Google Android 4.0, Google Android 4.1, Google Android 4.2, Google Android 4.3, Google Android 4.4, Google Android 5.x, Google Android 6.x, Google Android 7.x, Google Android 8.x, Google Android 9.x
Similar Software:
Smart stay ex Smart stay ex - is a tool which will make your device more convenient to use. The device will not start a sleeping mode or blink off as long as a user is looking at it. The application uses front camera and controls the screen off
App usage - Manage/Track usage App usage - is an application to track usage of your smartphone. With this program you can set control of any phone, your own as well as that of others (for instance, your child). Time of usage, history of actions and many other things are available just in a couple of simple actions. Becides, you can hide the app itself so as nobody knows that you are tracking
Internet Booster Internet Booster - Internet booster undoubtedly saves you time, when you open an internet page. The Internet booster optimizes the data of your device’s traffic. It doesn’t matter if you use 2G, 3G, 4G, Wifi, Bluetooth or any other connection with good or poor signal
Quick System Info Quick System Info - all detailed information on the state of your device in one application. Track processor and RAM load. View all list of applications and number of active processes. You can get gyro sensor and battery data on new devices
SGS Tools SGS Tools is an app which contains useful functions specially for the Samsung Galaxy S.
It can do the following things:
• Secret codes list (Don't worry clicking around, there will appear a popup if you have selected factory/hard reset )
• System clean up: this means you can delete all system apps you don't like with 1 click. It will remove the .apk, the
AppsInstaller Install apps from your SD card with this utility. Users installing non-market apps no longer have to use the G1 browser to find/install an .apk. Apps not compiled on SDK 1.0 (any app released prior to Sept 23rd, 08) won't work, since they don't work on Android period
Couple Tracker: Phone Monitor Couple Tracker: Phone Monitor - is a secure monitoring which tracks all important events in the smartphone. You can view all received and sent messages, list of all calls as well as history of location change of your phone. The utility works in real time mode so it reacts each event very fast
UnApp - Easy uninstall multiple apps UnApp - is an application to remove several applications from your device at the same time. You can select several applications and delete them, which is rather faster than uninstalling them one at a time. With all that the application does not require root access
Clipboard Contents Clipboard Contents is a simple and lightweight clipboard manager which watches your clipboard for any changes and saves its contents for later use.
The contents from the clipboard history can be copied into the clipboard again, they can be edited, deleted, and shared too
Other Software by developer «Moonblink»:
Dazzle Configurable Switcher Dazzle Configurable Switcher - The ultimate switcher bar for your phone. Choose from 4 widget sizes, and choose which controls it shows: ringer, sync, WiFi, BT, GPS, airplane, or brightness with min/max/preset (and auto toggle on some phones). Now with both one-touch and popup controls. WIDGET, NOT AN APP: you have to install it on your home page
Audalyzer Audalyzer is a simple audio analyzer for Android. It displays sound readings from the microphone as a waveform display, as a frequency spectrum, and as a dB meter. dB levels are relative to the maximum input level of your device
Touch Test Touch Test - Shows display parameters, multiple touch points, and trails to let you see how linear your touchpanel is. Different hardware supports 1, 2, or more fingers -- see which yours is. Note Android before 2.0 supported only single touch. Please see the help for more info
ScrambledNet Lite (Android) ScrambledNet is a port of the KDE game "knetwalk", by Andi Peredri, Thomas Nagy and Reinhold Kainhofer.
The player is given a network diagram with the parts of the network randomly rotated; he/she must rotate them to connect all the terminals to the server.
· Portrait and landscape modes are handled
Test Card Test Card - A very simple screen test card for Android. Designed to allow you to view the structures of pixels under magnification. On many phones this will be totally uninteresting; on some, notably AMOLED displays, it may be more useful. Please read the help for more info
TestCard TestCard is a simple screen test pattern for Android devices.
The app displays test patterns which are intended to let you see the structure of individual pixels, and the effect that has on the overall quality of the display. On many devices, the display will be utterly uninteresting
TouchTest TouchTest is a simple Android application to test screen parameters and multi-touch.
The application displays a 50-pixel grid which illustrates the screen sizes, and edge markers to check the registration of the screen edge with the surrounding bezel
Chime Timer Chime Timer is a simple, configurable timer app, with nice chime sounds. It lets you create up to four timer configurations, each of which can have a pre-timer, a start bell, and an end bell.
Chime Timer keeps running in the background even if you navigate away to some other app; so you can play Scrambled Net, for example, while you're waiting for whatever it is
Substrate Substrate - This application contains a collection of live wallpapers for Android. Once installed, you can install any of the wallpapers on your desktop in the usual way. The package also contains a runnable application which previews all the wallpapers and provides access to their settings
Tricorder Tricorder - A simple tricorder simulator for Android powered phones, using real sensors to detect magnetic fields, gravity, etc. See the passing gravity wave from a distant collapsar on your phone screen (actual device sensitivity may be insufficient to detect gravity waves). Detect buried powerful magnets! Be a mega-geek! Etc
