GeoLog saves the sensors data (gps, accelerometer, magnetometer data, etc.) of your device to a log file and calculates the coverage of the site. The coverage is a ratio of the track covering area to the area of the site (expressed in percents).
GeoLog 2 is able to synchronize the log with the photos made with any camera and thereby create geophotos, i.e. photos supplied with geographic coordinates and camera orientation at the moment of shooting.
Features:
1. Recording of any sensor data of your device with a configurable period of record.
2. Synchronizing your photos with the log, i.e. creating geofoto.
3. Simultaneous viewing of multiple logs and sites on the map.
4. Creating PDF-report of the coverage of the site.
Applications:
- Logging of sensors data of the device for post-processing.
- Creating geofotos from ordinary photos.
- Creating reports on results of the inspection of the site, including Search and Rescue (SAR) operations.
Limitations:
1) Creating up to 3 projects.
2) Using not more than 3 logs for synchronization.
! Caution:
For some devices switching to sleeping mode may cause sensors to turn off, as a result of which the sensor data will not be recorded to log, and azimuth will be not identified during synchronization.
Like it? Share with your friends!
Supported operating systems:
Google Android 10.x, Google Android 2.2, Google Android 2.3, Google Android 3.0, Google Android 3.1, Google Android 3.2, Google Android 4.0, Google Android 4.1, Google Android 4.2, Google Android 4.3, Google Android 4.4, Google Android 5.x, Google Android 6.x, Google Android 7.x, Google Android 8.x, Google Android 9.x
Similar Software:
FillErUp Android application used to record vehicle mileage and calculate mpg
Distance Measurement Distance Measurement - Quick distance calculator, measurement or estimator using:- 1. Screen (for small object) 2. Camera (for short distance) 3. GPS/Network (for long distance) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ A) How to measure using Screen:- 1. Put the object on your phone's screen 2. Drag the button to start measurement B) How to measure distance using Camera:- 1
Compass XL Compass XL - Compass XL is a tool to search bearings (azimuth) using the device built-in magnetic sensors and the device GPS. You can also easy switch from true North and magnetic North. The compass accuracy depends on the performance of your device. If it works perfectly, this means your sensors are perfect, too
Outdoor Speedometer for Android Outdoor Speedometer for Android - The Outdoor Navigation software is your best friend through your adventures in the wild.
Go into the outdoors with confidence and enjoy your activities without worrying about the tools to help you navigate. Your Outdoor Navigation app is made by the people who have been developing this software since 2003 across multiple platforms
Analog Compass Analog Compass is an Android application that simulates the physical behavior of a real compass
myAltitude See your Altitude, Min and Max Altitudes, Oxygen level and more! Wear Supported!
3D Measure 3D Measure - [3D Measure] It's a tool which perform non-contact distance measurement by using camera and hardware sensor of device. Quick estimation of the distance to any object and the object height and width. BEFORE MEASURE: 1. Set the camera height above the ground plane 2. Set the measure mode, height or width 3. Aim at the bottom of the object HOW TO MEASURE: 1
Smart Compass 360 Smart Compass 360 - Smart Compass 360 is a basic compass application that shows you which direction your phone is pointed. You can use Compass in all outdoor activities as you can think about - walking, sailing, hiking, climbing, camping, flying, reading a map and so much more. Smart Compass 360 is a traveler's best friends
Other Software by developer «SITIS»:
not found
Comments on GeoLog:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
GeoLog is compatible with your device Lava Xolo Q1010i
