TiltLander is a simple project to demonstrate accelerometer use in Android. It's just the Android Lunar Lander demo, with the accelerometer hooked up to control the tilt of the lander.
How to play
You have to land the lander on the landing pad, which is shown as a green line at the bottom of the screen. (The actual position changes at random.) Sounds easy, but:
* You must be moving slowly -- see your speed at the top middle of the screen
* You must be reasonably level
* You must be completely on the landing pad
You can control your descent by firing your engine. The engine always pushes you in the direction you are pointing, so by tilting the lander, you can also control your side-to-side movement. But watch out -- fuel is limited. Your fuel state is shown at the top left of the screen.
You can fire the engines by pressing the trackball button or touching the screen; control the angle of the lander by tilting the phone. But note: rotating the lander does nothing in itself; to move sideways, you need to point in the direction you want to go and fire the engine.
What's New in This Release:
· Allow install to SD card.
Like it? Share with your friends!
Supported operating systems:
Google Android 1.6, Google Android 10.x, Google Android 2.0, Google Android 2.1, Google Android 2.2, Google Android 2.3, Google Android 3.0, Google Android 3.1, Google Android 3.2, Google Android 4.0, Google Android 4.1, Google Android 4.2, Google Android 4.3, Google Android 4.4, Google Android 5.x, Google Android 6.x, Google Android 7.x, Google Android 8.x, Google Android 9.x
Similar Software:
Light Flow Light Flow - is a system application which can extend notification functionality. You can set vibration samples depending on the type of a notification. The application gives an access to light indicatorsettings. Select a unique configuration for each application
Greenify Greenify - is a useful utility thanks to which you can automatically disable unused processes in background mode in order to prolongue the work of your Android device. A user can also schedule start of certain applications according to time or event
Accelerometer values Accelerometer values - THIS APPLICATION WILL SOON BE REMOVED FROM THE MARKET!
IT'S REPLACED by
"AccelerometerValues" which has many more features and also comes for free.
The current code can be found on
http://karanar
SendLog SendLog is a diagnostic tool. It will send the log file and a process list from your phone to an email.
This is useful to send to the developer of an application in case it crashes or otherwise misbehaves.
You can choose any of the formats that logcat supports. The default and recommended format is "time"
Simple system monitor Simple System Monitor - real time mode monitoring of the resources of your smartphone. This application will show you many different kinds of data in real time. This utility offers many functions and it will gladden those who want to know everything about their device. It is rather easy to handle it with all that
Fingerprint scanner tools Fingerprint scanner tools - is an application which allows you to perform certain actions with the help of fingerprint scanner. It let you adjust the work of your fingerprint scanner by yourself and to your liking. For this you need to select certain actions
Android Junk Files Cleaner Android Junk Files Cleaner is an android system tool which can clean history ,protect your personal privacy , save your disk space ,make your phone's speed more faster
Unused app remover Unused app remover - is a useful utility able to bring your Android device in order. In case smartphone memory is taken the software will define which applications are used not often but take much memory
CPU Booster CPU Booster - The best way to increase the CPU productivity of your phone, tablet or any other Android based device.
CPU Booster completes dynamic CPU Overclock in conformity with the processor’s temperature. The CPU productivity depends very much on it’s working temperature, so when the temperature is increased, the productivity is reduced
Other Software by developer «Moonblink»:
Dazzle Configurable Switcher Dazzle Configurable Switcher - The ultimate switcher bar for your phone. Choose from 4 widget sizes, and choose which controls it shows: ringer, sync, WiFi, BT, GPS, airplane, or brightness with min/max/preset (and auto toggle on some phones). Now with both one-touch and popup controls. WIDGET, NOT AN APP: you have to install it on your home page
Dazzle Dazzle is a configurable switcher widget for Android devices; it allows you to create one or more switcher widgets, in four sizes, with your choice of controls. You can choose from WiFi, Bluetooth, GPS, airplane mode, and brightness controls; on supported devices, brightness lets you toggle between auto and manual modes.
· Four widget sizes
TestCard TestCard is a simple screen test pattern for Android devices.
The app displays test patterns which are intended to let you see the structure of individual pixels, and the effect that has on the overall quality of the display. On many devices, the display will be utterly uninteresting
Test Card Test Card - A very simple screen test card for Android. Designed to allow you to view the structures of pixels under magnification. On many phones this will be totally uninteresting; on some, notably AMOLED displays, it may be more useful. Please read the help for more info
TouchTest TouchTest is a simple Android application to test screen parameters and multi-touch.
The application displays a 50-pixel grid which illustrates the screen sizes, and edge markers to check the registration of the screen edge with the surrounding bezel
Substrate Substrate - This application contains a collection of live wallpapers for Android. Once installed, you can install any of the wallpapers on your desktop in the usual way. The package also contains a runnable application which previews all the wallpapers and provides access to their settings
Touch Test Touch Test - Shows display parameters, multiple touch points, and trails to let you see how linear your touchpanel is. Different hardware supports 1, 2, or more fingers -- see which yours is. Note Android before 2.0 supported only single touch. Please see the help for more info
Tricorder Tricorder - A simple tricorder simulator for Android powered phones, using real sensors to detect magnetic fields, gravity, etc. See the passing gravity wave from a distant collapsar on your phone screen (actual device sensitivity may be insufficient to detect gravity waves). Detect buried powerful magnets! Be a mega-geek! Etc
ScrambledNet Lite (Android) ScrambledNet is a port of the KDE game "knetwalk", by Andi Peredri, Thomas Nagy and Reinhold Kainhofer.
The player is given a network diagram with the parts of the network randomly rotated; he/she must rotate them to connect all the terminals to the server.
· Portrait and landscape modes are handled
Chime Timer Chime Timer is a simple, configurable timer app, with nice chime sounds. It lets you create up to four timer configurations, each of which can have a pre-timer, a start bell, and an end bell.
Chime Timer keeps running in the background even if you navigate away to some other app; so you can play Scrambled Net, for example, while you're waiting for whatever it is
