DHD Proximity Sensor Recalibrator Due to many DHD's being incorrectly factory calibrated with regards to the proximity sensor, this little app was written to allow one to change the calibration on-the-fly and persist it over reboots.
This app is specifically for those experience issues with the proximity sensor.
Well known symptoms include the following:
- Screen fails to turn off when holding to face on a call
- Screen does turn off when holding to face on a call, but fails to come back on, requiring taking out the battery
These problems are common in custom kernels/ROM's. HTC has addressed this issue however in their kernels from 1.32 onwards, but have failed to release Linux kernel source code for any new versions (latest source is pre-1.32).
Usage:
1. Install app.
2. Run app.
3. Press the toggle button to start monitoring.
4. Move your finger over the proximity sensor (the little LED next to the front facing speaker).
5. Adjust the High and Low threshold values to your liking.
For those whose screen does not turn off, it probably means the factory values are set too high.
For those whose screen does not turn back on, it probably means the factory values are set too low.
The setting will be saved, and will be applied every time you reboot your phone. No need to go through any of the steps unless you want to change the calibration. When the settings are applied at boot time, you will get a toasty indicating the calibration value applied.
Removal:
If for whatever reason you find the application does not work, or you do not want it anymore, just uninstall the app, and reboot. Your original factory settings will be in effect again. This application does not modify your system and does not require root rights.
What's New in This Release:
· Fix issues with sensor listener not getting disabled
What's New in 1.8:
· Correct boot permissions for ICS
· Prevent app from being installed on SD card (which will cause issues)
What's New in 1.6:
· Added support for calling 'su' when permissions are wrong.
What's New in 1.5:
· Only for CM7 users. Use nightly 92 or above. This includes the necessary kernel patch.
· Should work on SENSE with custom kernel. Apply patch (or ask your kernel 'builder' to do so).
· Removed Beer button due to paypal policy...
What's New in 1.4:
· Added some alert dialogs to aid with the problems people are experiencing. (In case of error, please note both the title text, and the first few lines in the text of the alert dialog.)
What's New in 1.3:
· Add some better handling when something goes not as planned (likely on non-DHD hardware)
What's New in 1.2:
· Removed amount from Paypal, feel free to donate whatever you feel like
Like it? Share with your friends!
Supported operating systems:
Google Android 1.0, Google Android 1.5, Google Android 1.6, Google Android 10.x, Google Android 2.0, Google Android 2.1, Google Android 2.2, Google Android 2.3, Google Android 3.0, Google Android 3.1, Google Android 3.2, Google Android 4.0, Google Android 4.1, Google Android 4.2, Google Android 4.3, Google Android 4.4, Google Android 5.x, Google Android 6.x, Google Android 7.x, Google Android 8.x, Google Android 9.x
Similar Software:
Flash Alert Flash Alert - Flash Alerts enables flash for calls and other notifications. This way you can be notified by your flash for every notification. Led FlashAlert gives iPhone's LED flash notification feature for calls, sms, facebook, whatsapp, gmail, yahoo etc
死點復修器 Dead Pixel Fixer 死點復修器 Dead Pixel Fixer - This simple app is to try to fix any dead pixel in your Android device. Just tap on the dead pixel to proceed the recovery. It stimulates the screen region with flash. Keep your device wake up mode and screen on, let the flash square runs for about 15~30 minutes, the pixel can be repaired. It is free for use
Hiking Flashlight (NightFlash) Hiking Flashlight (NightFlash) - Night Flash is a LED/Panel light communication tool and flashlight tool.
It is helpful for climber.
Have many effect and Morse code to help them do light communication.
Basic : Continuous / Low / Middle / High Speed.
SOS : SOS signal.
Adjust : Adjust light time and dark time.
Effect : Many different flash mode
High Flashlight Torch High Flashlight Torch - This is a Torch Application for your mobile anyone can use their camera flashlight as a torch with this application. You can use this app when you in need to find something in dark place just simple one click on icon
Flashing Light Flashing Light - This torch app uses the LED of your phone's camera flash to illuminate the way. A must have app for all phones! FEATURES - Camera LED flashlight : Use camera LED as a light source. - Fastest startup. - Elegant design
Kitty Zipper Screen Lock Kitty Zipper Screen Lock - show your love with a cute kitty zipper screen lock.
Another cool and amazing for your phone has come our way!
Try this new app now and experience an unbelievable effect on your phone!
If you are a cat lover then Kitty Zipper Screen Unlock application on Play Store will provide you a great opportunity to show your love with a cute kitty
Bulb Swing Bulb Swing - Swing the phone upward to turn on/off the light.
What's New in This Release:
· minor fix
What's New in This Release:
· bug fix
What's New in 5.7:
· minor enhancements
What's New in 5
Flash Light: Bright LED Torch Flash Light: Bright LED Torch - Description
LED Flashlight Energy Saving app The fastest startup super smart flashlight light app with Smart Camera Flash LED technology for your Android device
