DHD Proximity Sensor Recalibrator Due to many DHD's being incorrectly factory calibrated with regards to the proximity sensor, this little app was written to allow one to change the calibration on-the-fly and persist it over reboots.
This app is specifically for those experience issues with the proximity sensor.
Well known symptoms include the following:
- Screen fails to turn off when holding to face on a call
- Screen does turn off when holding to face on a call, but fails to come back on, requiring taking out the battery
These problems are common in custom kernels/ROM's. HTC has addressed this issue however in their kernels from 1.32 onwards, but have failed to release Linux kernel source code for any new versions (latest source is pre-1.32).
Usage:
1. Install app.
2. Run app.
3. Press the toggle button to start monitoring.
4. Move your finger over the proximity sensor (the little LED next to the front facing speaker).
5. Adjust the High and Low threshold values to your liking.
For those whose screen does not turn off, it probably means the factory values are set too high.
For those whose screen does not turn back on, it probably means the factory values are set too low.
The setting will be saved, and will be applied every time you reboot your phone. No need to go through any of the steps unless you want to change the calibration. When the settings are applied at boot time, you will get a toasty indicating the calibration value applied.
Removal:
If for whatever reason you find the application does not work, or you do not want it anymore, just uninstall the app, and reboot. Your original factory settings will be in effect again. This application does not modify your system and does not require root rights.
What's New in This Release:
· Fix issues with sensor listener not getting disabled
What's New in 1.8:
· Correct boot permissions for ICS
· Prevent app from being installed on SD card (which will cause issues)
What's New in 1.6:
· Added support for calling 'su' when permissions are wrong.
What's New in 1.5:
· Only for CM7 users. Use nightly 92 or above. This includes the necessary kernel patch.
· Should work on SENSE with custom kernel. Apply patch (or ask your kernel 'builder' to do so).
· Removed Beer button due to paypal policy...
What's New in 1.4:
· Added some alert dialogs to aid with the problems people are experiencing. (In case of error, please note both the title text, and the first few lines in the text of the alert dialog.)
What's New in 1.3:
· Add some better handling when something goes not as planned (likely on non-DHD hardware)
What's New in 1.2:
· Removed amount from Paypal, feel free to donate whatever you feel like
Like it? Share with your friends!
Supported operating systems:
Google Android 1.0, Google Android 1.5, Google Android 1.6, Google Android 10.x, Google Android 2.0, Google Android 2.1, Google Android 2.2, Google Android 2.3, Google Android 3.0, Google Android 3.1, Google Android 3.2, Google Android 4.0, Google Android 4.1, Google Android 4.2, Google Android 4.3, Google Android 4.4, Google Android 5.x, Google Android 6.x, Google Android 7.x, Google Android 8.x, Google Android 9.x
Similar Software:
TeslaLED TeslaLED - TeslaLED is a LED flashlight app for many phones
Cool FlashLight Cool FlashLight is a simple but powerful application intended to turn your phone into a flashlight.
Cool FlashLight allows you to use camera LED (if supported) or screen with full brightness as flashlight.
Also Cool FlashLight supports animated flashlight.
What's New in This Release:
·
Lamp (Android) Lamp is designed for temporary lighting or is used as a flashlight. It includes there lamps that you can turn on or off by touching the screen. You can adjust the high, middle and low brightness level
Bna Bulb Bna Bulb - This is amazing new idea of lighting up the place using phone Shake.
Bulb Light is an exciting new app that turns your phone Shake into a simple lamp light to help find your way in a dark setting. It starts up quickly, giving you an extremely bright light!
It has feature to choose your own bulb from the list of bulbs.
If you have any problem and suggestion
Brighteriffic Brighteriffic creates a Home shortcut that lets you toggle the global screen brightness
Bna Bulb Light Bna Bulb Light - Bna Saver Light. When you need more than a flashlight, you need a Bna Saver Light!
Light up an entire room! Have a bright idea!
This is amazing new idea of lighting up the place using phone Shake.
Bna Saver Light is an exciting new app that turns your phone Shake into a simple lamp light to help find your way in a dark setting
Luminox Flash Light The Luminox Flash light app contains twenty different flashlights and lighting effects!
LED Flashlight Torch - Free LED Flashlight Torch - Free is a free handy torch app for your android device. No need to find battery torch anymore just grab your android device and make it torch with this cool app. The app uses the camera light as a flashlight. You can also use your camera flashlight when the area is dark or dim light.
FEATURES:
Use Camera LED Flashlight as Torch
Quick FlashLight Quick ☀ Flash "Simplicity is the ultimate sophistication." So is Quick ☀ Flash. It does exactly what it's supposed to do - uses your flash or screen as a flashlight being as simple as it can get
Screen On Toggler Screen On Toggler is basically a replacement tool for the default search button on your Android phone when you long press it. It allows you to quickly toggle your screen's timeout from always ON to your screen timeout's setting and vice versa.
Once installed, press and hold the search button on your android phone and a dialog will appear
Other Software by developer «leppie»:
not found
Comments on DHD Proximity Sensor Recalibrator:
papa beat:
I hope it wprks
Date: 9 Oct 12
HKG:
This app doesnt work with Sony Ericsson Arc S. Error: "Kernel not supported" -ps_kadc not found.
Date: 9 Nov 12
anil:
sensor
Date: 10 Dec 12
Jawad:
his app doesn't work with sky vega a830L Error: "Kernel not supported" -ps_kadc not found.
Date: 30 Apr 13
jpmurf:
Doesn't work on LG G2 D800 "Kernel not supported" -ps_kadc not found.
Date: 5 Aug 14
deepak:
in lava xolo a600 "Kernel not supported" -ps_kadc not found. same issue
Date: 7 Dec 16
If you noted an error or download link is broken, please, report it via this page or use comments.
DHD Proximity Sensor Recalibrator is compatible with your device MAG iMiTO iM7
