TiltLander is a simple project to demonstrate accelerometer use in Android. It's just the Android Lunar Lander demo, with the accelerometer hooked up to control the tilt of the lander.
How to play
You have to land the lander on the landing pad, which is shown as a green line at the bottom of the screen. (The actual position changes at random.) Sounds easy, but:
* You must be moving slowly -- see your speed at the top middle of the screen
* You must be reasonably level
* You must be completely on the landing pad
You can control your descent by firing your engine. The engine always pushes you in the direction you are pointing, so by tilting the lander, you can also control your side-to-side movement. But watch out -- fuel is limited. Your fuel state is shown at the top left of the screen.
You can fire the engines by pressing the trackball button or touching the screen; control the angle of the lander by tilting the phone. But note: rotating the lander does nothing in itself; to move sideways, you need to point in the direction you want to go and fire the engine.
What's New in This Release:
· Allow install to SD card.
Like it? Share with your friends!
Supported operating systems:
Google Android 1.6, Google Android 10.x, Google Android 2.0, Google Android 2.1, Google Android 2.2, Google Android 2.3, Google Android 3.0, Google Android 3.1, Google Android 3.2, Google Android 4.0, Google Android 4.1, Google Android 4.2, Google Android 4.3, Google Android 4.4, Google Android 5.x, Google Android 6.x, Google Android 7.x, Google Android 8.x, Google Android 9.x
UnApp - Easy uninstall multiple apps UnApp - is an application to remove several applications from your device at the same time. You can select several applications and delete them, which is rather faster than uninstalling them one at a time. With all that the application does not require root access
Partition Table Partition Table - A MUST have tool for would be rooters or if you just want to know more about your phone. As the title says the application displays the Partition table of your Android phone. A small help screen in the app will further guide you about the Partition Table
AppsInstaller Install apps from your SD card with this utility. Users installing non-market apps no longer have to use the G1 browser to find/install an .apk. Apps not compiled on SDK 1.0 (any app released prior to Sept 23rd, 08) won't work, since they don't work on Android period
toolwiz cleaner ToolWiz cleaner ---Forever free for everyone, everywhere One Click to speed up your mobile phone. Best free clean solution for Android. Toolwiz cleaner is an android clear application which will free all in all conditions for all users. It is the best tool to clean up your android phones
Rebootnow Rebootnow gives you a one click reboot widget , or you also can reboot in the config screen . support:English,Chinese,Janpnese . thank you for enjoying our android system tool kit
Greenify Greenify - is a useful utility thanks to which you can automatically disable unused processes in background mode in order to prolongue the work of your Android device. A user can also schedule start of certain applications according to time or event
Sensors toolbox Sensors toolbox - is a set of tools which allows you to know almost everything about status of your mobile device. With this app you can get profound information on all sensors of your device. Besides, you can watch sensors work in real time mode and get detailed description of each detector and parameter
2G-3G OnOff 2G-3G OnOff - Simple widget (1×1) for changing network mode.
It's a shortcut for network system settings which allows you to change 2G-3G and data roaming mode with only 2 clicks instead of 4.
What's New in This Release:
· Icon fix for 1.5 and 1.6
· Now you can center icon, when label is off
Other Software by developer «Moonblink»:
Touch Test Touch Test - Shows display parameters, multiple touch points, and trails to let you see how linear your touchpanel is. Different hardware supports 1, 2, or more fingers -- see which yours is. Note Android before 2.0 supported only single touch. Please see the help for more info
Dazzle Configurable Switcher Dazzle Configurable Switcher - The ultimate switcher bar for your phone. Choose from 4 widget sizes, and choose which controls it shows: ringer, sync, WiFi, BT, GPS, airplane, or brightness with min/max/preset (and auto toggle on some phones). Now with both one-touch and popup controls. WIDGET, NOT AN APP: you have to install it on your home page
TouchTest TouchTest is a simple Android application to test screen parameters and multi-touch.
The application displays a 50-pixel grid which illustrates the screen sizes, and edge markers to check the registration of the screen edge with the surrounding bezel
ScrambledNet Lite (Android) ScrambledNet is a port of the KDE game "knetwalk", by Andi Peredri, Thomas Nagy and Reinhold Kainhofer.
The player is given a network diagram with the parts of the network randomly rotated; he/she must rotate them to connect all the terminals to the server.
· Portrait and landscape modes are handled
Substrate Live Wallpapers A set of live wallpapers, each displaying a slowly changing pattern which gradually evolves in your home screen
TestCard TestCard is a simple screen test pattern for Android devices.
The app displays test patterns which are intended to let you see the structure of individual pixels, and the effect that has on the overall quality of the display. On many devices, the display will be utterly uninteresting
Substrate Substrate - This application contains a collection of live wallpapers for Android. Once installed, you can install any of the wallpapers on your desktop in the usual way. The package also contains a runnable application which previews all the wallpapers and provides access to their settings
Dazzle Dazzle is a configurable switcher widget for Android devices; it allows you to create one or more switcher widgets, in four sizes, with your choice of controls. You can choose from WiFi, Bluetooth, GPS, airplane mode, and brightness controls; on supported devices, brightness lets you toggle between auto and manual modes.
· Four widget sizes
Tricorder Tricorder - A simple tricorder simulator for Android powered phones, using real sensors to detect magnetic fields, gravity, etc. See the passing gravity wave from a distant collapsar on your phone screen (actual device sensitivity may be insufficient to detect gravity waves). Detect buried powerful magnets! Be a mega-geek! Etc
Chime Timer Chime Timer is a simple, configurable timer app, with nice chime sounds. It lets you create up to four timer configurations, each of which can have a pre-timer, a start bell, and an end bell.
Chime Timer keeps running in the background even if you navigate away to some other app; so you can play Scrambled Net, for example, while you're waiting for whatever it is
