TiltLander is a simple project to demonstrate accelerometer use in Android. It's just the Android Lunar Lander demo, with the accelerometer hooked up to control the tilt of the lander.
How to play
You have to land the lander on the landing pad, which is shown as a green line at the bottom of the screen. (The actual position changes at random.) Sounds easy, but:
* You must be moving slowly -- see your speed at the top middle of the screen
* You must be reasonably level
* You must be completely on the landing pad
You can control your descent by firing your engine. The engine always pushes you in the direction you are pointing, so by tilting the lander, you can also control your side-to-side movement. But watch out -- fuel is limited. Your fuel state is shown at the top left of the screen.
You can fire the engines by pressing the trackball button or touching the screen; control the angle of the lander by tilting the phone. But note: rotating the lander does nothing in itself; to move sideways, you need to point in the direction you want to go and fire the engine.
What's New in This Release:
· Allow install to SD card.
Like it? Share with your friends!
Supported operating systems:
Google Android 1.6, Google Android 10.x, Google Android 2.0, Google Android 2.1, Google Android 2.2, Google Android 2.3, Google Android 3.0, Google Android 3.1, Google Android 3.2, Google Android 4.0, Google Android 4.1, Google Android 4.2, Google Android 4.3, Google Android 4.4, Google Android 5.x, Google Android 6.x, Google Android 7.x, Google Android 8.x, Google Android 9.x
Similar Software:
Custom Locale Custom Locale allows you to modify the Locale of your Android phone to anything you like.
You can select a pre-defined Locale or create your own.
What's New in This Release:
· Added Chinese translation
What's New in 0.9
CleanWiz CleanWiz - Toolwiz Cleaner is a free system optimizer that can make your Android smartphone perform better. The app features a built-in cleaner that removes junk files and no longer needed data from your device to recover space
CPU Booster CPU Booster - The best way to increase the CPU productivity of your phone, tablet or any other Android based device.
CPU Booster completes dynamic CPU Overclock in conformity with the processor’s temperature. The CPU productivity depends very much on it’s working temperature, so when the temperature is increased, the productivity is reduced
Mini Info A simple & hassle free way for device info. Widgets, toggle bar, and lots more! Enter Mini Info 2.0, the most beautiful system health monitor on Android. It gives everything you need in a fast, easy to use display
Aida 64 Aida 64 - is a software reflecting complete information on device. You can get the information on video accelerator, processor or RAM your smartphone is equipped with. Embedded diagnostics program will make synthetic test and show the core frequency
2G-3G OnOff 2G-3G OnOff - Simple widget (1×1) for changing network mode.
It's a shortcut for network system settings which allows you to change 2G-3G and data roaming mode with only 2 clicks instead of 4.
What's New in This Release:
· Icon fix for 1.5 and 1.6
· Now you can center icon, when label is off
Mobile Signal Widget PRO Mobile Signal Widget PRO - PLEASE NOTE:
There is an issue with Gingerbread 2.3.3 that prevents Mobile Signal Widget PRO from working correctly. There is nothing I can do to fix this; the problem is with the Android API.
PRO version features:
5 appearance options, including transparent background.
Tap to configure - Change widget appearance without re-adding
Android Junk Files Cleaner Android Junk Files Cleaner is an android system tool which can clean history ,protect your personal privacy , save your disk space ,make your phone's speed more faster
Clipboard Contents Clipboard Contents is a simple and lightweight clipboard manager which watches your clipboard for any changes and saves its contents for later use.
The contents from the clipboard history can be copied into the clipboard again, they can be edited, deleted, and shared too
Rebootnow Rebootnow gives you a one click reboot widget , or you also can reboot in the config screen . support:English,Chinese,Janpnese . thank you for enjoying our android system tool kit
Other Software by developer «Moonblink»:
Dazzle Configurable Switcher Dazzle Configurable Switcher - The ultimate switcher bar for your phone. Choose from 4 widget sizes, and choose which controls it shows: ringer, sync, WiFi, BT, GPS, airplane, or brightness with min/max/preset (and auto toggle on some phones). Now with both one-touch and popup controls. WIDGET, NOT AN APP: you have to install it on your home page
Chime Timer Chime Timer is a simple, configurable timer app, with nice chime sounds. It lets you create up to four timer configurations, each of which can have a pre-timer, a start bell, and an end bell.
Chime Timer keeps running in the background even if you navigate away to some other app; so you can play Scrambled Net, for example, while you're waiting for whatever it is
TouchTest TouchTest is a simple Android application to test screen parameters and multi-touch.
The application displays a 50-pixel grid which illustrates the screen sizes, and edge markers to check the registration of the screen edge with the surrounding bezel
Scrambled Net Scrambled Net - NEW: personal high scores, animations, and auto-solver. See menu to turn animations off. You are given a computer network with the connections all scrambled; rotate the tiles to connect all the terminals to the server. See if you can make your way through the 5 difficulty levels. Please see the in-game help
Test Card Test Card - A very simple screen test card for Android. Designed to allow you to view the structures of pixels under magnification. On many phones this will be totally uninteresting; on some, notably AMOLED displays, it may be more useful. Please read the help for more info
Audalyzer Audalyzer is a simple audio analyzer for Android. It displays sound readings from the microphone as a waveform display, as a frequency spectrum, and as a dB meter. dB levels are relative to the maximum input level of your device
Dazzle Dazzle is a configurable switcher widget for Android devices; it allows you to create one or more switcher widgets, in four sizes, with your choice of controls. You can choose from WiFi, Bluetooth, GPS, airplane mode, and brightness controls; on supported devices, brightness lets you toggle between auto and manual modes.
· Four widget sizes
Substrate Live Wallpapers A set of live wallpapers, each displaying a slowly changing pattern which gradually evolves in your home screen
Touch Test Touch Test - Shows display parameters, multiple touch points, and trails to let you see how linear your touchpanel is. Different hardware supports 1, 2, or more fingers -- see which yours is. Note Android before 2.0 supported only single touch. Please see the help for more info
