VJCandela - Turn you phone into a super bright torch!
This program is used to permit control of the flash light on the Universal family of HTC Phones, to allow it to be used as a torch etc.
Note: this may cause damage to your hardware over prolonged periods! I don't see why it should, but use at your own risk.
VJCandela can be used as a stand alone tool or through the command line.
Use the Flame icon to enable the torch. Press and hold to enable (with your fingers perhaps). Use the Lock icon to enable a lock. This will keep the torch on until you disable the Flame. Use the Display icon to disable the display to save power. Drag on the title bar to move the window.
Pressing a key on the keyboard will close VJCandela (for instance, if you have the display off).
Command Line Options
-on
Enable Torch
-off
Disable Torch
-hwkey
Use this mode when assigning to a hardware key button in Settings
-about
Show about box
Use VJCandelaLite if you want no GUI. Just launch it using the same command lines or a hardware key.
This also has the additional command line, "-screen" to toggle the screen off when the torch is on (to sve battery).
VJCandela can be assigned to the Backlight Key on your Universal by creating the following key in your registry and copying the contents of a similar entry over: [HKEY_LOCAL_MACHINESOFTWAREMicrosoftShellKeys40C8
Please note: The default shortcuts will only work on English language OS in the default install folder.
Please edit the shortcuts for non English versions.
This software is in constant development, with new features and device compatibility being added over time.
If you have any comments or feature requests, please email!
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Pocket PC 2002, Windows Mobile 2003, Windows Mobile 5.0
Similar Software:
screenGuard ScreenGuard, your intelligent device protector.Do you want to carry your Pocket PC in your pocket? It disables the touch-screen & buttons allowing you to still see the screen!
AutoLight AutoLight - HTC Topaz (Diamond 2) auto adjust backlight function is a good idea with a not very good implementation. It must be said to HTC excuse that the light sensor is very noisy, especially at low light conditions.
Some alternatives do exist but are not very good or are Compact Framework application (not a very good idea for background application)
disCali disCali - disCali disables the "Align Screen" that pops up whenever you press the middle D-PAD button + Message Button.
Instructions:
1. Install the cab.
2. Run "disCali" form Start Menu > Programs, this will disable the align screen function from your entire device until soft-rest (even from the control panel).
3
FlashLight Colors 2002 FlashLight Colors 2002 allows you to to paint completely your PDA's screen with a color. You can also make 2 colors flashing alternatively. You can set the speed flash. In this new version you can choose any backcolor you want from multiples colors available. This backcolor will be stored in memory for the next launch
QWERTY Backlight Timeout Changer QWERTY Backlight Timeout Changer - On many of the Windows Mobile devices with hardware keyboard there is no way to adjust the backlight on the keys to your liking. This little application lets you set the timeout to whatever you want
Pocket LAMP Pocket LAMP is the universal program for Pocket PC. The program can turn your pocket computer into a lamp, flash and siren. You can use this program in different situation of your life
PDAlight PDAlight - A tiny utility that converts your prized Pocket PC device into a cheap flashlight.
It fills the entire screen with one of 8 colours of your choice. Selected by using the up/down motions of the directional navigation pad. Default is White (like most flashlights), but it can be Grey, Blue, Red, etc. if the situation requires. Its small, simple, yet effective
TCD (Taskbar Clock and Date) TCD (Taskbar Clock and Date) - With this little program you can change the look of your date and time shown in the Windows Mobile taskbar.
What's New in This Release:
· Added CheckBox for choosing a date separator ( "/" "-" "
G-Light G-Light - Adjust your backlight levels according to the values your light sensor measures.
Because I wasn't satisfied with the automatic backlight adjustment of my Diamond (it was always too bright for my needs), I made G-Light.
With this tool you can adjust your backlight levels according to the values your light sensor measures..
Other Software by developer «Vijay555»:
VJSmallIcons VJSmallIcons - This program is used to shrink the icons in the Start Menu > Programs launcher built into Pocket PCs.
Note: it only works once, each time you change the folder. So assign it to a hardware key.
Note: you must launch "programs" once before use; it will complain if you don't.
Install the cab and launch the shortcut
VJSmallIcons II VJSmallIcons II - This little program is used, like VJSmallIcons, to change the view mode of the "Programs" program launcher built into the Pocket PC.
Please launch Programs before launching VJSmallIcons II.
There are no command line options, just a configuration menu enabled by clicking on the little icon in the top right corner
VJEschaton VJEschaton - This program is used to soft reset, hard reset, toggle display, toggle LEDs (possibly!) and get Uptime for your PDA.
Note: It will hard reset. Please use this carefully.
Beta version:
For no good reason at all, I've tried to implement a sleep/power off mode
VJPhoneTools VJPhoneTools - These tools are used with the PocketPC Phone Edition to make an SMS, Email or call from the command line.
This software is a replacement for my old tools, VJSMS and VJDialer.
This replacement is hopefully now Windows Mobile 2005 compatible. This new release features the ability to send an SMS directly, without having to write the text in the SMS editor
VJBlueSync VJBlueSync - This program can be used to automatically enable BlueTooth, load ActiveSync and start a synchronization through BlueTooth
VJBigPhone VJBigPhone - This small program is used to reformat the Phone Dialer that gets all shrunk down after applying the VGA hack.
It will allow the phone to be usable in VGA mode
What's New in This Release:
· added internal international support. No international command line required
VJOkButt VJOkButt - This app is designed to be assigned to a hardware key or to be used with a program like SmallMenu or Xbar.
It will simulate pressing the OK button or Close button.
Note: it will close apps, not minimise them. So it can be used as a tiny taskmanager, to close tasks to save memory
VJSlippyPalm VJSlippyPalm - This is a support app for the the Palm Messaging App.
Once installed, you lose some access to the normal inbox, which you may still want.
Using VJSlippyPalm, you can assign the app to a hardware key.
Running VJSlippyPalm will then launch the Palm Messaging app
VJPhoneShortcuts VJPhoneShortcuts - Install this app to have a shortcut to the Call History screen and the Speed Dialer Screen on WM5 devices.
Current Tools:
-Enable Speaker Phone
-Jump to SpeedDialer
-Jump to CallHistory
-Load Inbox and check Pop Email (you must be in the Email account to use this, eg not in SMS account. This will be improved in the future
VJBrisk VJBrisk - VJBrisk is a small .exe file that can be used to replace another .exe.
eg, If you want to change your (for example) Inbox.exe application and make it launch a third party email application, but the Inbox.exe is somehow hardcoded into a skin or application, then rename VJBrisk.exe to Inbox.exe, and replace the old Inbox.exe with the new one
