X1BC (X1 Button Controller) is capable of capturing both short and long presses of panel key, ok key, L/R softkeys, up/down volume keys, and the win key on the slide out KB. The camera half and full press can also be captured and fully configured for short and long half press, as well as short and long full press. Also, the camera key will be ignored while the camera program is open. Capturing each key is all optional. They can be switched by the registry keys detailed in the next post. By default, if the reg keys are not there, none are captured. You can capture the long press only, short and long press, or leave the key alone. Fn key presses are also detected for A, S, D, F, G, Z, X, C, and V keys. Registry strings are used to specify what happens when the key is pressed. You can choose to open execute anything from a program exe to a mortscript to an mp3. You may also configure it to send a character or special key. This allows maximum flexibility.
The program can also make the win key or tab key a ctrl key. There are two modes of operation for each key. For the win key: Short press mode (short press to enable ctrl then press a letter), Long press mode (press letter while holding ctrl). With the tab key, it is still possible to send a tab character: Short press mode (short press to enable ctrl then press a letter; long press sends tab chr), Long press mode (press letter while holding ctrl; short press sends tab chr).
The program also supports vibrate feedback for a press and hold event. The duration is configurable or this can be disabled. Also configurable is the duration you must hold a key for the long press to occur.
To start the key hook, just launch X1BC.exe. If it is already running, launching X1BC.exe again will end the program and restore the keys to default.
What's New in This Release:
· Added special key (&R) for screen rotation
· Added special keys (&Q and &E) for left and right softkeys
· Fixed bug that cause crash if Fn key was assigned to non existent file
· Will now prevent camera app from opening if you reassign camera button
· Changed format of reg settings for camera button
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 6.1 Professional, Windows Mobile 6.5 Professional
Similar Software:
Update for HTC Touch Pro2 - Improves overall stability of the People application 2010-11-12 This update for HTC Touch Pro2 improves overall stability of the People application.
Copy the update to your device. To install the update, tap the .exe file on your phone and follow the on-screen instructions.
Note: If you perform a device hard reset, you will need to reinstall the update after the hard reset
Kai's Stylus Control for HTC Touch Diamond Kai's Stylus Control for HTC Touch Diamond - With Stylus Control can you at inserting or pulling out the PDA-Pen execute certain actions, e.g. start a program, switch off the device etc. The program works with the HTC Touch Diamond and identical devices, as there is a Sensor for the Pen built in
Hotfix to disable the pop-up menu when slowly plugging in an AC or car charger for the HTC Touch Diamond Hotfix to disable the pop-up menu when slowly plugging in an AC or car charger for the HTC Touch Diamond - The Choose a connection type menu will pop up automatically when you slowly plug in an AC or car charger. If this happens, download this hotfix to disable it.
Copy the hotfix, which is an .exe file, to your device. To install the hotfix, tap the
XCPUScalar 2007 XCPUScalar allows you to dynamically scale the processor speed of your handheld Pocket PC 2002, 2003, WM2003 SE, and Windows Mobile 5. It uses the power of the XSCALE or TI OMAP (OMAP850 and OMAP1510) processor and unlocks its dynamic scaling capabilities. You can scale the processor speed from 100 to 728MHz
Hotfix to enhance the security mechanism of Bluetooth service for HTC Touch Diamond2 Hotfix to enhance the security mechanism of Bluetooth service for HTC Touch Diamond2 - This hotfix enhances the security mechanisms of the Bluetooth service to make the Bluetooth communication more secure.
Copy the hotfix, which is an .exe file, to your device. To install the hotfix, tap the .exe file and follow the on-screen instructions
HTC P4350 - Fix for Windows Live Messenger for English version HTC P4350 - Fix for Windows Live Messenger for English version - If contacts appear as offline in Windows Live Messenger even though they are online, download this fix (.exe file) and install it on your device to solve the problem.
Note: Only the 18125.0.2.3 OS build and earlier versions have this problem and need to be installed with the hot fix
Manila Today Page (MTP) Manila Today Page (MTP) - This application displays Today plug-ins in one of the Manila pages.
Setup Instructions:
1) Setup MTPInstall.CAB to Main memory
2) Go to programs menu, run MTP Configurator.
3) Choose page to host plug-ins, choose plug-ins you want to enable. Uncheck "TouchFLO 3D".
4) Click apply button. Close configurator
Update for HTC Diamond2 Power LED Notification Update for HTC Diamond2 Power LED Notification - This update for the HTC Diamond2 allows you to see the battery charging status right from the LED. Now enhanced to illuminate green when fully charged, with a quick look you will know when your device is powered and ready to go.
Copy the update, which is an .exe file, to your device. To install the update, tap the
Other Software by developer «Jonathan King»:
Timer X Timer X - A fully featured timer in the palm of your hand! TimerX has features to handle all of your timing needs
A2DPSwitch A2DPSwitch toggles the connection to an A2DP headset
BTKeepAlive BTKeepAlive runs in the background and checks to make sure Bluetooth is on and turns it on if it isn't. The checking interval in milliseconds can be modified by changing HKCU/Software/JKing/BTKeepAlive/Interval (DWORD). The default value is 60000 (one minute) and if that reg value does not exist 60000 will be used.
BTKeepAlive can also keep discoverable mode on
