Categories: Multimedia & Graphics, System Utilities
Upload date: 21 Jan 11
Developer: Zevele
License: Freeware
Downloads: 6221 File Size: 343 Kb
AutoLoudspeaker is an application that will automatically turn on the loudspeaker when the phone is away from the ear, and turns it off when it is near the ear.
AutoLoudspeaker is fairly simple to use. When running the application a service starts. If the shortcut is pressed again, a notification message pops and the user can choose to close the service. As long as the service runs the loudspeaker will automatically switch on if the proximity sensor is unblocked and off if it is blocked (only during an active phone call).
· Switch the loudspeaker according to the proximity-sensor or g-sensor.
· Answer an incoming call by gesture (wave your hand in front of the proximity-sensor).
What's New in This Release:
· Add ability to automatically answer a call when the proximity sensor is blocked (altec1000's request). This feature can be set by selecting the "Block" gesture in the settings window. The gesture first waits for the sensor to be unblocked for a certain amount of time, after which it checks that the sensor is blocked for a second period of time - only if both periods were fulfilled AutoLoudspeaker will answer the call. Two registry keys were added: BlockGestureOpenDelay - Sets the minimum period (in msec) the sensor has to be unblocked before checking the block status. BlockGestureBlockDelay - Sets the minimum period (in msec) the sensor has to be blocked before answering the call.
· Add command-line controls (to Start/Stop the service). Two commands are available: quit - Stops the service. update - Force AutoLoudspeaker to reread the settings from the registry.
· Changed the notification behavior. Now pressing the notification immediately brings the Settings application.
· I've included the proximity-sensor registry keys of Omnia2 reported by O2amksin.
· Some minor code and gui changes.
What's New in 1.5:
· Reverted to the polling method of v1.3 for the Proximity-Sensor (it just works better). This should also solve the exception on devices with no proximity sensor.
· Fixed issue where AutoLoudspeaker failed to create a shortcut in a non-English localizations.
· Fixed issue where the notification icon remained visible when the service was closed from the settings application.
· Fixed an issue where the delay occurred also before turning the speaker off (instead of just before turning it on).
· Added a short vibration before changing the loudspeaker state. The vibration length can be set via the registry value: HKCU/Software/AutoLoudspeaker/VibrationLength (default: 20ms). The vibration LED index can be set via the value: HKCU/Software/AutoLoudspeaker/VibrationLED (default: 1 - this is the one for the HD2).
· If proximity sensor is not detected (it's registry keys are missing) the possibility to select the proximity method is disabled in the settings application.
· Some performance improvement for the "managed service" code
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 2003, Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional, Windows Mobile 6.5 Professional
Similar Software:
DisguiserVoiceHZ DisguiserVoiceHZ - DisguiserVoiceHZ allows you to disguise your voice in real time. The app can be used to change the pitch of your voice and the voice quality in Hz.
Simply adjust the settings using the sliders and press the button to hear your voice in the selected frequency. Please note that devices with slower processors can have trouble mixing over 8,000 Hz
BlackMailer BlackMailer - This program allows you to record a message and plays it back in another voice.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
Hotfix for resolving skipping during audio playback for HTC Touch HD Hotfix for resolving skipping during audio playback for HTC Touch HD - If you encounter skipping during audio playback, download this hotfix to solve this problem.
Copy the hotfix, which is an .exe file, to your device. To install the hotfix, tap the .exe file and follow the on-screen instructions
VURecorder VURecorder is a voice actuated voice recorder. Select 'Start/Stop' from the toolbar and use the slider to adjust the sound trigger level to your current room settings. When the sound in the room is above the slider level then the program will start the recorder. The recorder stops once the sound level is back to pre-trigger levels
DTMFWaves DTMFWaves - DTMFWaves is a DTMF wave file composer. Select 'New' from the toolbar and enter a name and phone number. When you tap 'Save' the program will create a wave file with the DTMF tones. You can also re-play the DTMF tones in a file explorer interface
MP3ID3Remover MP3ID3Remover - MP3ID3Remover clears the IDv3 tags of MP3 files.
To use the app, select the desired MP3 file and tap on it. The program will then remove the album art and song information from the file.
The software uses the Mp3ID3 libraries from UNIX CID3v2 by Marcos Paulo Ferreira
VoiceEmailed VoiceEmailed - This program allows you to make a voice recording. Then the program creates a blank email with the voice recording in a wave in zipped format as an attachment to save network charges. The ZIP compression/decompression routines from Info-Zip.org
This program requires that you have both the 'BeanDLL
VoiceCalendars VoiceCalendars - This program allows you to make calendar folders. Tap on the calendar folder name to display a calendar that allows you to create 999 voice wave notes for each day of that calendar. Set the root folder on startup.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
VoiceNoterer VoiceNoterer - VoiceNoterer allows you to record named voice notes and attaches a note drawing/voices to them. Select 'New' from the toolbar to start the recording. When you tap the 'Stop ' button the recorder stops and the note application opens. When you close the note it is appended to the end of the wave file. Tap on the wave file to hear it and view the drawing note
Other Software by developer «Zevele»:
Zevele's SimplePiano Zevele's SimplePiano - A simple piano application for Windows Mobile.
· WVGA, VGA, QVGA, HVGA versions.
· It has three octaves.
· Record and Playback.
· Dualtouch via the PinchToZoom events
· Customizable skins.
· Customizable sounds (currently include Piano, Acoustic Guitar & Violin)
Zevele's Blinker Zevele's Blinker - This application blinks the device LED every few seconds. The idea is to have some notification that the device is still alive.
· Blink the LED every few seconds. If the battery level is below the threshold, orange led is blinking otherwise the green on is used
