DHD Proximity Sensor Recalibrator Due to many DHD's being incorrectly factory calibrated with regards to the proximity sensor, this little app was written to allow one to change the calibration on-the-fly and persist it over reboots.
This app is specifically for those experience issues with the proximity sensor.
Well known symptoms include the following:
- Screen fails to turn off when holding to face on a call
- Screen does turn off when holding to face on a call, but fails to come back on, requiring taking out the battery
These problems are common in custom kernels/ROM's. HTC has addressed this issue however in their kernels from 1.32 onwards, but have failed to release Linux kernel source code for any new versions (latest source is pre-1.32).
Usage:
1. Install app.
2. Run app.
3. Press the toggle button to start monitoring.
4. Move your finger over the proximity sensor (the little LED next to the front facing speaker).
5. Adjust the High and Low threshold values to your liking.
For those whose screen does not turn off, it probably means the factory values are set too high.
For those whose screen does not turn back on, it probably means the factory values are set too low.
The setting will be saved, and will be applied every time you reboot your phone. No need to go through any of the steps unless you want to change the calibration. When the settings are applied at boot time, you will get a toasty indicating the calibration value applied.
Removal:
If for whatever reason you find the application does not work, or you do not want it anymore, just uninstall the app, and reboot. Your original factory settings will be in effect again. This application does not modify your system and does not require root rights.
What's New in This Release:
· Fix issues with sensor listener not getting disabled
What's New in 1.8:
· Correct boot permissions for ICS
· Prevent app from being installed on SD card (which will cause issues)
What's New in 1.6:
· Added support for calling 'su' when permissions are wrong.
What's New in 1.5:
· Only for CM7 users. Use nightly 92 or above. This includes the necessary kernel patch.
· Should work on SENSE with custom kernel. Apply patch (or ask your kernel 'builder' to do so).
· Removed Beer button due to paypal policy...
What's New in 1.4:
· Added some alert dialogs to aid with the problems people are experiencing. (In case of error, please note both the title text, and the first few lines in the text of the alert dialog.)
What's New in 1.3:
· Add some better handling when something goes not as planned (likely on non-DHD hardware)
What's New in 1.2:
· Removed amount from Paypal, feel free to donate whatever you feel like
Like it? Share with your friends!
Supported operating systems:
Google Android 1.0, Google Android 1.5, Google Android 1.6, Google Android 10.x, Google Android 2.0, Google Android 2.1, Google Android 2.2, Google Android 2.3, Google Android 3.0, Google Android 3.1, Google Android 3.2, Google Android 4.0, Google Android 4.1, Google Android 4.2, Google Android 4.3, Google Android 4.4, Google Android 5.x, Google Android 6.x, Google Android 7.x, Google Android 8.x, Google Android 9.x
Similar Software:
死點測試器 Dead Pixel Tester This simple app is to test if any dead pixel in your Android device. It fills the entire screen with a single color, allowing the user to easily spot the abnormal pixels that fail to show the color. Just tap anywhere on the screen to proceed to the next test color. It is free for use
Banner (Android) This application turns your phone into a scrolling LED-style banner
LockScreen Free With just one touch of the unlocking screen, LockScreen will allow you to unlock your phone and enable you too:
Hiking Flashlight (NightFlash) Hiking Flashlight (NightFlash) - Night Flash is a LED/Panel light communication tool and flashlight tool.
It is helpful for climber.
Have many effect and Morse code to help them do light communication.
Basic : Continuous / Low / Middle / High Speed.
SOS : SOS signal.
Adjust : Adjust light time and dark time.
Effect : Many different flash mode
Lamp (Android) Lamp is designed for temporary lighting or is used as a flashlight. It includes there lamps that you can turn on or off by touching the screen. You can adjust the high, middle and low brightness level
Flash Alert Flash Alert - Flash Alerts enables flash for calls and other notifications. This way you can be notified by your flash for every notification. Led FlashAlert gives iPhone's LED flash notification feature for calls, sms, facebook, whatsapp, gmail, yahoo etc
Natural Image Panorama Images of natural scenery can be installed on all android smartphone
Phone Light Phone Light - Do you need to light the way in the night? Phone light application will easily handle this and many more different tasks which require light. Use your phone as a source of light. The greatest thing about Phone Light is that you always have it in your pocket
TestCard TestCard is a simple screen test pattern for Android devices.
The app displays test patterns which are intended to let you see the structure of individual pixels, and the effect that has on the overall quality of the display. On many devices, the display will be utterly uninteresting
Stars Pattern Screen Lock Stars Pattern Screen Lock - Improve Your Android's Lock Screen Security with Stars Pattern Screen Lock
We are different and we make different, here we are presenting a new different ordinary star pattern screen lock and enjoy the new and exciting stars pattern screen lock and beautify your phone with the delightful background theme
Other Software by developer «leppie»:
not found
Comments on DHD Proximity Sensor Recalibrator:
papa beat:
I hope it wprks
Date: 9 Oct 12
HKG:
This app doesnt work with Sony Ericsson Arc S. Error: "Kernel not supported" -ps_kadc not found.
Date: 9 Nov 12
anil:
sensor
Date: 10 Dec 12
Jawad:
his app doesn't work with sky vega a830L Error: "Kernel not supported" -ps_kadc not found.
Date: 30 Apr 13
jpmurf:
Doesn't work on LG G2 D800 "Kernel not supported" -ps_kadc not found.
Date: 5 Aug 14
deepak:
in lava xolo a600 "Kernel not supported" -ps_kadc not found. same issue
Date: 7 Dec 16
If you noted an error or download link is broken, please, report it via this page or use comments.
DHD Proximity Sensor Recalibrator is compatible with your device Multilaser MS50G
