TiltLander is a simple project to demonstrate accelerometer use in Android. It's just the Android Lunar Lander demo, with the accelerometer hooked up to control the tilt of the lander.
How to play
You have to land the lander on the landing pad, which is shown as a green line at the bottom of the screen. (The actual position changes at random.) Sounds easy, but:
* You must be moving slowly -- see your speed at the top middle of the screen
* You must be reasonably level
* You must be completely on the landing pad
You can control your descent by firing your engine. The engine always pushes you in the direction you are pointing, so by tilting the lander, you can also control your side-to-side movement. But watch out -- fuel is limited. Your fuel state is shown at the top left of the screen.
You can fire the engines by pressing the trackball button or touching the screen; control the angle of the lander by tilting the phone. But note: rotating the lander does nothing in itself; to move sideways, you need to point in the direction you want to go and fire the engine.
What's New in This Release:
· Allow install to SD card.
Like it? Share with your friends!
Supported operating systems:
Google Android 1.6, Google Android 10.x, Google Android 2.0, Google Android 2.1, Google Android 2.2, Google Android 2.3, Google Android 3.0, Google Android 3.1, Google Android 3.2, Google Android 4.0, Google Android 4.1, Google Android 4.2, Google Android 4.3, Google Android 4.4, Google Android 5.x, Google Android 6.x, Google Android 7.x, Google Android 8.x, Google Android 9.x
Similar Software:
OG Smart Booster OG Smart Booster - Get the best Booster for Android Now: Boost your phone’s speed to optimize performance with OG Smart Booster!
Booster for Android is a top-rated mobile phone optimization app that helps millions of users speed up their Android phones, reclaim memory, save battery, kill tasks & completely uninstall unwanted apps
CPU Booster CPU Booster - The best way to increase the CPU productivity of your phone, tablet or any other Android based device.
CPU Booster completes dynamic CPU Overclock in conformity with the processor’s temperature. The CPU productivity depends very much on it’s working temperature, so when the temperature is increased, the productivity is reduced
Andevice Andevice is an intuitive app which shows commonly needed information about your Android device and its state
Sysinfo (Android) Sysinfo is a tool for Android developers who are going to build and deploy Android applications to run on various Android powered devices
My paid app My paid app - is a manager of applications bought from Google market. This application will remember and sort out paid applications and will make the work with market easier for a user in this way
Storage Defragmenter Storage Defragmenter - Storage Defragmentation has become very easy with Storage Defragmenter. Increase your phone's performance and speed by defragmenting its disk. No root is required! Get is now while it is still free. ## About defragmentation ## In the maintenance of file systems, defragmentation is a process that reduces the amount of fragmentation
Clipboard Contents Clipboard Contents is a simple and lightweight clipboard manager which watches your clipboard for any changes and saves its contents for later use.
The contents from the clipboard history can be copied into the clipboard again, they can be edited, deleted, and shared too
Settings Settings - Settings is a free ad-supported app for quickly and easy set settings. The settings switches are interconnected with each other and are developed for maximum device compatibility. Settings has the most beautiful design and pixel perfect icons for high definition displays. It's optimized for smartphones and tablets
user.conf Creator user.conf Creator - This application allows you to create your user.conf/userinit.sh files without the need to edit complicated files. Simply plug your values into the app and it will create the necessary files for you and push them to the proper location.
For now, works for Cyanogen 3.6.8x+, Cyanogen 4.1.99+ and OfficialDonut. See help for details
Rebooter Rebooter - is an application for fast reboot of user processes instead of the reboot of the device. The reboot will be done in several seconds and will not effect the work of operating system
Other Software by developer «Moonblink»:
Dazzle Dazzle is a configurable switcher widget for Android devices; it allows you to create one or more switcher widgets, in four sizes, with your choice of controls. You can choose from WiFi, Bluetooth, GPS, airplane mode, and brightness controls; on supported devices, brightness lets you toggle between auto and manual modes.
· Four widget sizes
TouchTest TouchTest is a simple Android application to test screen parameters and multi-touch.
The application displays a 50-pixel grid which illustrates the screen sizes, and edge markers to check the registration of the screen edge with the surrounding bezel
Dazzle Configurable Switcher Dazzle Configurable Switcher - The ultimate switcher bar for your phone. Choose from 4 widget sizes, and choose which controls it shows: ringer, sync, WiFi, BT, GPS, airplane, or brightness with min/max/preset (and auto toggle on some phones). Now with both one-touch and popup controls. WIDGET, NOT AN APP: you have to install it on your home page
Audalyzer Audalyzer is a simple audio analyzer for Android. It displays sound readings from the microphone as a waveform display, as a frequency spectrum, and as a dB meter. dB levels are relative to the maximum input level of your device
Touch Test Touch Test - Shows display parameters, multiple touch points, and trails to let you see how linear your touchpanel is. Different hardware supports 1, 2, or more fingers -- see which yours is. Note Android before 2.0 supported only single touch. Please see the help for more info
Scrambled Net Scrambled Net - NEW: personal high scores, animations, and auto-solver. See menu to turn animations off. You are given a computer network with the connections all scrambled; rotate the tiles to connect all the terminals to the server. See if you can make your way through the 5 difficulty levels. Please see the in-game help
Test Card Test Card - A very simple screen test card for Android. Designed to allow you to view the structures of pixels under magnification. On many phones this will be totally uninteresting; on some, notably AMOLED displays, it may be more useful. Please read the help for more info
Substrate Live Wallpapers A set of live wallpapers, each displaying a slowly changing pattern which gradually evolves in your home screen
Tricorder Tricorder - A simple tricorder simulator for Android powered phones, using real sensors to detect magnetic fields, gravity, etc. See the passing gravity wave from a distant collapsar on your phone screen (actual device sensitivity may be insufficient to detect gravity waves). Detect buried powerful magnets! Be a mega-geek! Etc