DHD Proximity Sensor Recalibrator Due to many DHD's being incorrectly factory calibrated with regards to the proximity sensor, this little app was written to allow one to change the calibration on-the-fly and persist it over reboots.
This app is specifically for those experience issues with the proximity sensor.
Well known symptoms include the following:
- Screen fails to turn off when holding to face on a call
- Screen does turn off when holding to face on a call, but fails to come back on, requiring taking out the battery
These problems are common in custom kernels/ROM's. HTC has addressed this issue however in their kernels from 1.32 onwards, but have failed to release Linux kernel source code for any new versions (latest source is pre-1.32).
Usage:
1. Install app.
2. Run app.
3. Press the toggle button to start monitoring.
4. Move your finger over the proximity sensor (the little LED next to the front facing speaker).
5. Adjust the High and Low threshold values to your liking.
For those whose screen does not turn off, it probably means the factory values are set too high.
For those whose screen does not turn back on, it probably means the factory values are set too low.
The setting will be saved, and will be applied every time you reboot your phone. No need to go through any of the steps unless you want to change the calibration. When the settings are applied at boot time, you will get a toasty indicating the calibration value applied.
Removal:
If for whatever reason you find the application does not work, or you do not want it anymore, just uninstall the app, and reboot. Your original factory settings will be in effect again. This application does not modify your system and does not require root rights.
What's New in This Release:
· Fix issues with sensor listener not getting disabled
What's New in 1.8:
· Correct boot permissions for ICS
· Prevent app from being installed on SD card (which will cause issues)
What's New in 1.6:
· Added support for calling 'su' when permissions are wrong.
What's New in 1.5:
· Only for CM7 users. Use nightly 92 or above. This includes the necessary kernel patch.
· Should work on SENSE with custom kernel. Apply patch (or ask your kernel 'builder' to do so).
· Removed Beer button due to paypal policy...
What's New in 1.4:
· Added some alert dialogs to aid with the problems people are experiencing. (In case of error, please note both the title text, and the first few lines in the text of the alert dialog.)
What's New in 1.3:
· Add some better handling when something goes not as planned (likely on non-DHD hardware)
What's New in 1.2:
· Removed amount from Paypal, feel free to donate whatever you feel like
Like it? Share with your friends!
Supported operating systems:
Google Android 1.0, Google Android 1.5, Google Android 1.6, Google Android 10.x, Google Android 2.0, Google Android 2.1, Google Android 2.2, Google Android 2.3, Google Android 3.0, Google Android 3.1, Google Android 3.2, Google Android 4.0, Google Android 4.1, Google Android 4.2, Google Android 4.3, Google Android 4.4, Google Android 5.x, Google Android 6.x, Google Android 7.x, Google Android 8.x, Google Android 9.x
Similar Software:
LED Strobe LED Strobe - This app turns your Android device into a strobe light or stroboscopic lamp, commonly called a strobe. It produces regular flashes of light using the camera flash LED. The speed of flashes can be adjusted.
What's New in This Release:
· Bug fixes.
· Ad network changed
Flashlight Torch Flashlight Torch - Application to use the screen as a flashlight, when you don't have a camera flash in dark situations. You can customize and change the background color, and you can easily switch between three different intensities: Low, medium and high
Simplest Flashlight Simplest Flashlight - Use your device's camera flash as a torch.
Simple and very useful flashlight app.
The simplest and most practical flashlight app, helping you out of the dark in one second
Brighteriffic Brighteriffic creates a Home shortcut that lets you toggle the global screen brightness
Pencerahan Brightness Pencerahan Brightness is an Android application, which allows you to easily adjust screen brightness. You can increase or decrease the screen brightness without the need of searching into the Settings-Display menus. It is great for saving battery life
Happy Face zip Unlock Screen Want a funny and cool unlock screen for your android device ? We bring to you our new and awesome Sad Happy unlock screen. Super simple to use zipper unlock app. Simply install our Happy face zipper unlock app. Open Happy face zipper unlock app. You will see only 1 option in the zipper unlock app, "
Kitty Zipper Screen Lock Kitty Zipper Screen Lock - show your love with a cute kitty zipper screen lock.
Another cool and amazing for your phone has come our way!
Try this new app now and experience an unbelievable effect on your phone!
If you are a cat lover then Kitty Zipper Screen Unlock application on Play Store will provide you a great opportunity to show your love with a cute kitty
