TiltLander is a simple project to demonstrate accelerometer use in Android. It's just the Android Lunar Lander demo, with the accelerometer hooked up to control the tilt of the lander.
How to play
You have to land the lander on the landing pad, which is shown as a green line at the bottom of the screen. (The actual position changes at random.) Sounds easy, but:
* You must be moving slowly -- see your speed at the top middle of the screen
* You must be reasonably level
* You must be completely on the landing pad
You can control your descent by firing your engine. The engine always pushes you in the direction you are pointing, so by tilting the lander, you can also control your side-to-side movement. But watch out -- fuel is limited. Your fuel state is shown at the top left of the screen.
You can fire the engines by pressing the trackball button or touching the screen; control the angle of the lander by tilting the phone. But note: rotating the lander does nothing in itself; to move sideways, you need to point in the direction you want to go and fire the engine.
What's New in This Release:
· Allow install to SD card.
Like it? Share with your friends!
Supported operating systems:
Google Android 1.6, Google Android 10.x, Google Android 2.0, Google Android 2.1, Google Android 2.2, Google Android 2.3, Google Android 3.0, Google Android 3.1, Google Android 3.2, Google Android 4.0, Google Android 4.1, Google Android 4.2, Google Android 4.3, Google Android 4.4, Google Android 5.x, Google Android 6.x, Google Android 7.x, Google Android 8.x, Google Android 9.x
Similar Software:
FrontFlash notification FrontFlash notification - is an application for setting up notifications on your phone. When the application is installed, the front camera of the phone flashes as if it was a LED, when it receives a notification. It also extends the concept of notifications to unread counters, which receive notifications from applications
OnOff Widgets Pack OnOff Widgets Pack - This widget pack contains next toggles:
- AirplaneMode
- APN
- AutoRotate
- AutoSync
- Bluetooth
- Brightness
- GPS
- LockScreen
- Network 2G/3G[shortcut]
- ScreenTimeout
- SilentMode
- WiFi
ADD WIDGET TO THE HOME SCREEN!!!
Also added support for skins.
Email us if you have problems
OverclockWidget (Need Root) OverclockWidget (Need Root) - It can help you make the CPU run as your wish and monitor the current CPU speed. It can be a speed monster, or a battery saver. It runs similar to setcpu, and when full speed, can speed up your game performance, such as Angry Bird, Cut the rope, Fruit Ninja etc... when set to lower freq, it can enlarge your battery life
Optimize ToolBox(15 functions) Optimize ToolBox(15 functions) - Description:
Optimize Tool Box is just like the Swiss Army Knife for your android mobile device. Top 15 functions make you manage your mobile phone so easily, effectively and efficiently
SGS Tools SGS Tools is an app which contains useful functions specially for the Samsung Galaxy S.
It can do the following things:
• Secret codes list (Don't worry clicking around, there will appear a popup if you have selected factory/hard reset )
• System clean up: this means you can delete all system apps you don't like with 1 click. It will remove the .apk, the
SysInfoTool for Android SysInfoTool for Android - SysInfo is a very useful utility that lets you view important information about your system.
This application show all processes running on your device. Tapping one of the processes displays detailed information and you can also kill running applications
Notification history log Notification History Log - is an application for viewing all notifications in your device, even those deleted. This is the only application, which will help you get old (removed) notifications. In fact, you will get control over all your notifications with this utility
SensorView SensorView is a little utility to view the sensor values from your Android driven smartphone.
Most smartphones have sensors for acceleration, magnetic field and light.
E.g. with the magnetic sensor and SensorView you can detect iron and other magenetic materials and you can also measure weak magnetic fields
Power Toggles Power Toggles - use all available functions of your phone with convenience. Set special buttons to activate or deactivate parameters directly from the run screen. Extra bar will allow you control player or wireless nets from notification menu
Other Software by developer «Moonblink»:
Dazzle Configurable Switcher Dazzle Configurable Switcher - The ultimate switcher bar for your phone. Choose from 4 widget sizes, and choose which controls it shows: ringer, sync, WiFi, BT, GPS, airplane, or brightness with min/max/preset (and auto toggle on some phones). Now with both one-touch and popup controls. WIDGET, NOT AN APP: you have to install it on your home page
Scrambled Net Scrambled Net - NEW: personal high scores, animations, and auto-solver. See menu to turn animations off. You are given a computer network with the connections all scrambled; rotate the tiles to connect all the terminals to the server. See if you can make your way through the 5 difficulty levels. Please see the in-game help
Tricorder Tricorder - A simple tricorder simulator for Android powered phones, using real sensors to detect magnetic fields, gravity, etc. See the passing gravity wave from a distant collapsar on your phone screen (actual device sensitivity may be insufficient to detect gravity waves). Detect buried powerful magnets! Be a mega-geek! Etc
Chime Timer Chime Timer is a simple, configurable timer app, with nice chime sounds. It lets you create up to four timer configurations, each of which can have a pre-timer, a start bell, and an end bell.
Chime Timer keeps running in the background even if you navigate away to some other app; so you can play Scrambled Net, for example, while you're waiting for whatever it is
Substrate Live Wallpapers A set of live wallpapers, each displaying a slowly changing pattern which gradually evolves in your home screen
Dazzle Dazzle is a configurable switcher widget for Android devices; it allows you to create one or more switcher widgets, in four sizes, with your choice of controls. You can choose from WiFi, Bluetooth, GPS, airplane mode, and brightness controls; on supported devices, brightness lets you toggle between auto and manual modes.
· Four widget sizes
Test Card Test Card - A very simple screen test card for Android. Designed to allow you to view the structures of pixels under magnification. On many phones this will be totally uninteresting; on some, notably AMOLED displays, it may be more useful. Please read the help for more info
ScrambledNet Lite (Android) ScrambledNet is a port of the KDE game "knetwalk", by Andi Peredri, Thomas Nagy and Reinhold Kainhofer.
The player is given a network diagram with the parts of the network randomly rotated; he/she must rotate them to connect all the terminals to the server.
· Portrait and landscape modes are handled
Audalyzer Audalyzer is a simple audio analyzer for Android. It displays sound readings from the microphone as a waveform display, as a frequency spectrum, and as a dB meter. dB levels are relative to the maximum input level of your device
