Auto Light lets you customize the different levels of brightness according the the environment. You just need to choose the brightness level (from 1 to 10) and set the limits of the sensor to the change the level. It is supposed to be better auto adjuster of the backlight for your phone.
Install
Run AutoLight.cab and install in main memory (not in storage card), run AutoLight.Config.cab and install where you like, then softreset (this should also disable the native auto adjust backlight function, check for that in the Control Panel Power applet).
If you have previously installed autolight V2.x and want only upgrade to V2.3 without having your configuration reset to default use the Configurator to stop AutoLight. After that overwrite AutoLight.exe, ChangeLight.exe and AutoLightConfig.exe with the files you find inside AutoLight.zip and softreset.
Configurator
AutoLight working depends on parameters it gets from registry. For details on parameters see AutoLight.reg.txt and AutoLigth.reg
The Configurator gives a more user friendly access to these parameters.
Nevertheless, the configuration process is quite complex and should be done after thoroughly reading AutoLight.reg.txt.
The second tab of the Configurator contains a graphical representation of the calibration table used to convert light sensor to backlight values. Note that: - the horizontal scale is not linear but goes according to square root of the light sensor value;
- the horizontal red segments represent the ranges of light sensor values assigned to every backlight level;
- the horizontal red segment whose backlight level is selected (with the control on top of the second tab) turns blue;
- the small rectangles connecting the segments are the hysteresis;
- the vertical blue line is the current light sensor value (only available when AutoLight is running);
- the horizontal blue line is the current backlight level (only available when AutoLight is running).
User offset change and increment/decrement backlight command line utility
If you are not satisfied with the backlight level as computed by AutoLight you can add a positive or negative offset to it. The offset values, one for use when on battery and one for use when on AC power, can be entered using the Configurator. Moreover, installation puts the small utility ChangeLight.exe together with AutoLight.exe. Running ChangeLight.exe with parameter "/-" decrements backlight level by one, with parameter "/+" increments backlight level by one. The utility then adjusts current offset level accordingly. Using ChangeLight.exe and a hardware button mapper you can change backlight and offset without using the stylus.
If you do not use ChangeLight.exe you can safely delete it.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional
Similar Software:
Force High Resolution Force High Resolution - Many applications display poorly on Pocket PC VGA as they don't support VGA mode, but use "double pixelisation". There's a work-around for this problem without having to go to "Full VGA" (as SE_VGA and OzVGA do). But this requires adding a little file next to each specific executable
MyLight A simple backlight controlling application
nueLight3 Light manager program for windows mobile pda phones
BacklightTimer BacklightTimer powers off your PocketPC display for a set time interval. Select the hours/minutes and tap the button to power off your PocketPC display. Once the timer has finished the program will turn on the display. NOTE: You can also press the 'On' button on your device to power on the display
Zensor2 Zensor2 is an application for automatically rotating your screen using HTC Touch Pro / HTC Touch Diamond's GSensor.
Unlike most other applications, Zensor is written to only detect firm moves, skipping moves done by your mobile moving in your pocket or when walking
HHZSoft OffScreen HHZSoft Offscreen provide the easist and convenient way to turn off screen and backlight. Also supports tray run mode and timer function, system reset & shutdown mode.
Lumos Lumos is fully customizable automatic backlight level changer developed as a complete replacement for stock HTC auto-backlight service. A wide range of HTC branded devices is supported starting from HTC Diamond/Touch Pro up to the current WM flagship HD2
TouchLockPro TouchLockPro is designed not to interfere with running applications and is a multipurpose locking application. Other locking solutions are often specific for locking only incoming calls/SMS. A lot of locking solutions also place a (transparent looking) Window on top of the running application (e.g
LavaTube LavaTube - Place a glass tube on the circle and tap start. This program will send different colour light into it.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
Morse Torch Morse Torch - convert your mobile into a pocket torch! This torch comes with a PTT key that allows you to use the torch for sending a message in morse code. The programm uses the mobile's flashlight LEDs.
Try the free demo version! This program is designed to work with HTC HD2, no other models have been tested for compatibility so far
Comments on Auto Light:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Auto Light is compatible with your device O2 xda Exec
