VJCandela - Turn you phone into a super bright torch!
This program is used to permit control of the flash light on the Universal family of HTC Phones, to allow it to be used as a torch etc.
Note: this may cause damage to your hardware over prolonged periods! I don't see why it should, but use at your own risk.
VJCandela can be used as a stand alone tool or through the command line.
Use the Flame icon to enable the torch. Press and hold to enable (with your fingers perhaps). Use the Lock icon to enable a lock. This will keep the torch on until you disable the Flame. Use the Display icon to disable the display to save power. Drag on the title bar to move the window.
Pressing a key on the keyboard will close VJCandela (for instance, if you have the display off).
Command Line Options
-on
Enable Torch
-off
Disable Torch
-hwkey
Use this mode when assigning to a hardware key button in Settings
-about
Show about box
Use VJCandelaLite if you want no GUI. Just launch it using the same command lines or a hardware key.
This also has the additional command line, "-screen" to toggle the screen off when the torch is on (to sve battery).
VJCandela can be assigned to the Backlight Key on your Universal by creating the following key in your registry and copying the contents of a similar entry over: [HKEY_LOCAL_MACHINESOFTWAREMicrosoftShellKeys40C8
Please note: The default shortcuts will only work on English language OS in the default install folder.
Please edit the shortcuts for non English versions.
This software is in constant development, with new features and device compatibility being added over time.
If you have any comments or feature requests, please email!
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Pocket PC 2002, Windows Mobile 2003, Windows Mobile 5.0
Similar Software:
QWERTY Backlight Timeout Changer QWERTY Backlight Timeout Changer - On many of the Windows Mobile devices with hardware keyboard there is no way to adjust the backlight on the keys to your liking. This little application lets you set the timeout to whatever you want
Rotate Screen On Tray Rotate Screen On Tray was a standard feature in Windows Mobile 2003 but no longer exists in Windows Mobile 6, also Windows Mobile 6 can rotate one degree only (Angle 90).
This small TrayApp can rotate 3 degrees and is controllable by a config file
CEBeans FlashLight CEBeans FlashLight - This program converts your Pocket PC into a flashlight.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
Lumos Lumos is fully customizable automatic backlight level changer developed as a complete replacement for stock HTC auto-backlight service. A wide range of HTC branded devices is supported starting from HTC Diamond/Touch Pro up to the current WM flagship HD2
NoScreen NoScreen - Shut off your screen whenever you don't need it
Auto Light Auto Light lets you customize the different levels of brightness according the the environment. You just need to choose the brightness level (from 1 to 10) and set the limits of the sensor to the change the level. It is supposed to be better auto adjuster of the backlight for your phone.
Install
Run AutoLight
GfxBoost GfxBoost - activates "QTV" mode for specific surfaces. This makes for example DirectDraw display smoother and: a bit slower or significantly faster, depending on how you look at it. It also seems to have a small effect on Direct3D/OpenGL.
This is a bit tricky! If you will benchmark it the result will be lower FPS. However, it will actually appear faster
Zevele's Blinker Zevele's Blinker - This application blinks the device LED every few seconds. The idea is to have some notification that the device is still alive.
· Blink the LED every few seconds. If the battery level is below the threshold, orange led is blinking otherwise the green on is used
WVGAFIX4 WVGAFIX3 allows you to change the screen resolution. It is designed mostly for devices with wide screens - 800x480 or 400x240 (Toshiba G900, SE Xperia X1, HTC Touch HD, HTC MAX 4G). So if a game or program doesn't work in wide mode you can try it in normal VGA/QVGA mode and it will probably work
Force High Resolution Force High Resolution - Many applications display poorly on Pocket PC VGA as they don't support VGA mode, but use "double pixelisation". There's a work-around for this problem without having to go to "Full VGA" (as SE_VGA and OzVGA do). But this requires adding a little file next to each specific executable
Other Software by developer «Vijay555»:
VJSmallIcons II VJSmallIcons II - This little program is used, like VJSmallIcons, to change the view mode of the "Programs" program launcher built into the Pocket PC.
Please launch Programs before launching VJSmallIcons II.
There are no command line options, just a configuration menu enabled by clicking on the little icon in the top right corner
VJDeviceLock VJDeviceLock - This program is only for use with the new Phone Roms that provide the Today Plugin, "Device Lock".
This small program can be launched, and it will immediately lock the phone using that plugin.
I'm not sure what it's compatible with - it works on my HTC Universal, and may work on the HTC Wizard
VJBigPhone VJBigPhone - This small program is used to reformat the Phone Dialer that gets all shrunk down after applying the VGA hack.
It will allow the phone to be usable in VGA mode
What's New in This Release:
· added internal international support. No international command line required
VJOkButt VJOkButt - This app is designed to be assigned to a hardware key or to be used with a program like SmallMenu or Xbar.
It will simulate pressing the OK button or Close button.
Note: it will close apps, not minimise them. So it can be used as a tiny taskmanager, to close tasks to save memory
VJSlippyPalm VJSlippyPalm - This is a support app for the the Palm Messaging App.
Once installed, you lose some access to the normal inbox, which you may still want.
Using VJSlippyPalm, you can assign the app to a hardware key.
Running VJSlippyPalm will then launch the Palm Messaging app
VJBaseHue VJBaseHue - This program is used to set the colour of the SoftKeys and Start Bar on WM5.
Modify the shortcut by adding a number on the end to represent the Hue you want
Use this chart to give you an idea of what value to use
VJBrisk VJBrisk - VJBrisk is a small .exe file that can be used to replace another .exe.
eg, If you want to change your (for example) Inbox.exe application and make it launch a third party email application, but the Inbox.exe is somehow hardcoded into a skin or application, then rename VJBrisk.exe to Inbox.exe, and replace the old Inbox.exe with the new one
VJTrayLaunch VJTrayLaunch - This program is used to launch any application from the Today Tray.
VJTrayLaunch is only for launching a small number of apps. Don't use it for 15 etc (due to the 32 task limit on WM).
This is a command line application, and can be used to launch any program or shortcut
VJPhoneTools VJPhoneTools - These tools are used with the PocketPC Phone Edition to make an SMS, Email or call from the command line.
This software is a replacement for my old tools, VJSMS and VJDialer.
This replacement is hopefully now Windows Mobile 2005 compatible. This new release features the ability to send an SMS directly, without having to write the text in the SMS editor
VJKeyPress This program can be used to simulate pretty much any keypress on the PocketPC
