Battlog is a simple utility that logs the battery performance. Use it to troubleshoot when and under what conditions the PPC uses the most power. The program provides a rolling graphical display of the latest data (Voltage, Current, and Temperaure) as well as saving additional information into the log file. Log entries can be recorded at 1, 5, and 10 sec intervals. New to version 0.2.1.105 is a battery Benchmark program.
Operation:
- The program will display the current battery status as soon as it is run.
- To begin logging, Select Update/Log and select Logging -> Log Location and enter the storage location for the log file. (the log file may reside either in main memory of on a storage card. If you place the log file on a storage card, please see the note below.
- To start Logging, select Update/Log -> Logging -> Start.
- To Start Logging, Select Update/Log -> Logging -> Stop.
CAUTION!
Please note that if you select the storage card for log storage, when waking the phone up the phone may take up to several minutes to wake up depending on the log frequency and length of time the phone has been asleep and whether power saving is enabled for the Storage Card.
What it logs:
- Date and Time.
- Is AC Charger Attached.
- Battery Voltage.
- Battery Current (Discharge).
- Battery Temperature.
- Battery level (%).
- Pertinent System events:
o Active Application.
o Speaker Phone Activity.
o Phone Radio Off/On.
o Phone Active Data Call (EVDO/1xRTT Activity).
o No Phone Service.
o Phone Searching For Service.
o Bluetooth Power State On/off.
o Bluetooth Hands Free Audio in use (BT Headphones).
o Bluetooth Hands Free Control in use (BT HF Headset).
o WiFi Power On.
o WiFi Connected.
o Bluetooth Connections Count.
o Bluetooth Connections Descriptions.
o Cellular Connections Count.
o Cellular Connections Descriptions.
o Phone Call (Talking).
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional
Similar Software:
BatteryChecker .Net Battery Checker displays the consumption rate of the main and emergency batteries
Batti Batti is a small application which shows you remaining power of your battery. Features:
Small
Batti takes very few space of your PDA memory. The battery indicator itself takes less than 20 KB and the whole application is less than 80 KB.
Highly configurable
Batti is highly configurable to suits your needs
Battery Pack Battery Pack - The Only Pocket PC Utility You Will Ever Need
__________________________________
The #1 selling Pocket PC program for two straight years - Battery Pack contains nine invaluable tools!
Battery Bar
Displays battery life (in hours & minutes), memory, storage card, backlight, clock & time zone information right on your today screen
BattClock BattClock shows Time and Battery percentage above the top bar.
Very small in memory: 1 Kb in memory (check it with a task manager)
No CPU usage: 0.00 % CPU usage, check it with a task manager)
Very small on disk: BattClock.exe 17 Kb on disk, BattClock
BatteryAlerterer BatteryAlerterer monitors your PocketPC battery level once a second and when the power is below the selected percentage then the alarm goes off. Select the minimum level of power and the program will alert you when the power is below
Hinavigator Hinavigator - Touch To Go is a software package that allows you to launch programs, make calls, view weather information, access Phone profiles, do ALT-TAB, turn on/off today Plug-ins, and navigate your device by only one hand
pwrstat pwrstat is a minimalist clutter free & really small (14,848 bytes) battery & memory monitor.
Features:
· Displays a battery bar at the top of the screen in most situations except when full screen applications are active (intentional).
· QVGA, VGA, WVGA & possibly other display modes are supported
VibrateBattery VibrateBattery alerts you via vibration when the power level is below the selected alert level. Select the alert level and run this program in the background. When the power reaches the minimum value the program will alert you via vibration
IndicatorTemperature IndicatorTemperature displays the temperature of the PocketPC battery on the title bar of any running PocketPC application. Select degrees Celsius/Fahrenheit and the program will report on the temperature once a second. NOTE: Some PPC's don't have thermistors. (0 Value)
BatteryGauge BatteryGauge - BatteryGauge is a graphical battery gauge viewer and logger. Simply start the app and it will check the battery level once a second and display it on a moving graph and gauge. The moving graph is 200 points of history of the readings
Comments on BattLog:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
BattLog is compatible with your device O2 XDA Guide (HTC Iolite)