Zevele's Blinker - This application blinks the device LED every few seconds. The idea is to have some notification that the device is still alive.
· Blink the LED every few seconds. If the battery level is below the threshold, orange led is blinking otherwise the green on is used.
· If the radio is turned off or there is no signal, another orange blink occurs (in addition to the regular one).
· When the phone is charging the orange LED lights constantly, every few seconds a sequence of green blinks according to the batter level occurs (20-40% - 1 blink, 40-60% - 2 blinks, 60-80% - 3 blinks and 80-100% - 4 blinks). If the battery is fully charged - the green led lights constantly.
· Blink interval and length can be set via the registry.
· Running the link once starts the application, on blink sequence occurs. Running the link again shuts the application, off blink sequence occurs.
· Blink sequence for the normal, low battery, no-signal, on and off blink sequences can be set via the registry
What's New in This Release:
· Fixed issue where Blinker halts at midnight.
What's New in 1.6:
· Fixed issue where custom LED id's were not saved.
What's New in 1.3:
· Blinker can now use the notification system instead of directly check the Stores. This can be configured in the setting, under "Use WM Notifications".
· Blinker can be configured to load on startup from the settings window.
· Improved performance.
· Some minor interface improvement to the settings dialog
What's New in 1.2:
· Added possibility to set the green/orange LED id.
· Added possibility to set the SMS store name.
· Improved error handling in case SMS store is not found
What's New in 1.1:
· Added notifications for new message (SMS/EMail/Voice), missed calls and wireless status.
· Added possibility to blink the keypad light as-well.
· Added separate delay interval on new message or missed call.
· Tweaked the unattended mode. The halting problem still exists, but it seems better now.
· Added a configuration utility. To run it press the Blinker shortcut again (after blinker is already running).
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 2003, Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional, Windows Mobile 6.5 Professional
Similar Software:
Flashlight Have always A flashlight with you! Its probably one of the most use full application you will install on your phone!
Auto Light Auto Light lets you customize the different levels of brightness according the the environment. You just need to choose the brightness level (from 1 to 10) and set the limits of the sensor to the change the level. It is supposed to be better auto adjuster of the backlight for your phone.
Install
Run AutoLight
EmergencyFlasher EmergencyFlasher - EmergencyFlasher can display a flashing light and it can be used when in emergency situations, at night.
EmergencyFlasher requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
SmartLight Automatic Backlight Tired of the display backlight going out when you are looking at the screen - e.g. while thinking about the right word for an sms? Wouldn't it be nice if your phone knew when you needed the light and when not? SmartLight does just that: Once you have opened an application, the backlight stays on - until you close or hide the application, switching the light off automatically
CarLights CarLights - This program allows you to convert your PocketPC computer into a head/tail light for your car.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
Screen Alive Screen Alive is a simple application that easily and temporarily overrides your screen power settings so that the screen will not dim or shut off while Screen Alive is running
Lighter Lighter - Do you need a light? The following lights included in software: * Simple lamp * Power saving lamp * Disco lighting * SOS lighting * Stroboscope (5Hz) * Simple colors Touch anywhere on screen to switch on/off lamp
LevelSight LevelSight - This application was originally built to flatten the brightness levels between AC and BATT on the Kaiser, but since lacking a workable front-camera API access, this works out better on devices with a light sensor.
More information is available here.
· works with native OEM backlight without extra
Slide2Unlock Pro Slide2Unlock Pro is a simple lock/unlock application which has the iPhone style slide unlocking. It can be used as a screensaver while you don't use your device.
- Slide2Unlock Pro is a freeware, you can use it without any charge, however, you can donate to motivate me to add more powerful features.
V1.05 (Feb
Other Software by developer «Zevele»:
Zevele's AutoLoudspeaker AutoLoudspeaker is an application that will automatically turn on the loudspeaker when the phone is away from the ear, and turns it off when it is near the ear.
AutoLoudspeaker is fairly simple to use. When running the application a service starts. If the shortcut is pressed again, a notification message pops and the user can choose to close the service
Zevele's SimplePiano Zevele's SimplePiano - A simple piano application for Windows Mobile.
· WVGA, VGA, QVGA, HVGA versions.
· It has three octaves.
· Record and Playback.
· Dualtouch via the PinchToZoom events
· Customizable skins.
· Customizable sounds (currently include Piano, Acoustic Guitar & Violin)
