nueClockControl - nueClockControl allows you to change the clock speed of your Qualcomm MSM7XXX(A) based mobile device.
Although overclocking is not possible yet, you can set the frequency of the ARM11 core to the preset ranges between 19.20 MHz and 528.00 MHz for MSM7x01A (384.00 MHz for MSM7x00). Note that Device Information always displays 528.00 MHz or 400.00MHz, so you should use nueClockControl to gauge your current device frequency.
There is also a command line mode:
nueClockControl.exe setting
where setting is a number from 0-7, corresponding to frequencies in the combobox. 7 is 528.00 MHz and 0 is 19.20 MHz. The numbers are different on the MSM7x00 400MHz parts.
Also note that it currently cannot determine the voltage level for non-A parts.
What's New in This Release:
· Added support for MSM7500/MSM7200, Added voltage level form MSM7501A/MSM7201A
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Pocket PC 2002, Windows Mobile 2003, Windows Mobile 5.0
Similar Software:
VoiceCentral 3.1 WM5 PPC VoiceCentral 3.1 WM5 PPC - Finalist in the "Speech" category at Pocket PC magazine's 2005, Fifth Annual Best Software Awards With Fonix VoiceCentral, true mobility is now possible through the power of speech
VJBlueSync VJBlueSync - This program can be used to automatically enable BlueTooth, load ActiveSync and start a synchronization through BlueTooth
GSM Led Fix GSM Led Fix - After you dismiss an alarm, the GSM Led sometimes continue to blink red for no reason. When you run this program the GSM Led will be reset and go back to blinking green
Touch InCall Screen Tweak Touch InCall Screen Tweak - The purpose of the application is to switch on your screen during a call if you don't have it against your ear. This is useful if you need to enter digits for voicemail or telephone banking, etc. The screen will be switched off if the phone is against your ear (since v1.0.10 this includes as you a making a call, as well as during the call)
IBE Tweaks VGA for Pocket PC IBE Tweaks VGA for Pocket PC is the ultimate tool you need to personalize your PPC/PPC Phone. It allows you to customize Internet Tricks, System Tricks, File Tricks show system information and many other tricks. Requirements Windows Mobile PPC 2003 or SE, Windows Mobile 2005 or later. (Warning: some of the hacks below listed might not work in your device
GPSBot GPSBot - This small application seems to solve the problem with TomTom navigator 7, iGO8 and other navigation programs, that shows a position of several meters back from the real one in some new devices.
Simply copy the file to the folder where the navigation program executable resides and launch this application instead of the real program
FingerStarterer FingerStarterer - FingerStarterer allows you to assign programs/files to buttons that you can start with your fingers. You can add/delete the buttons from the database. The you can use the bottom arrow keys and joypad to change button pages.
This program requires that you have both the 'BeanDLL
nueSIPStylus nueSIPStylus - nueSIPStylus automatically changes the input method / software input panel (SIP) based on whether the stylus is in or out. Note that you must have a device that comes with a stylus sensor (Touch Diamond, Touch Pro, Touch HD, etc...) for this program to work
Microsoft Voice Command (Upgrade for Pocket PC Only)- US Version Microsoft Voice Command (Upgrade for Pocket PC Only)- US Version - Voice Command transforms your Smartphone into your own virtual personal assistant, letting you use your voice to look up contacts, make phone calls, get calendar information, play and control your music, as well as start programs
FileSpeeder FileSpeeder - This program can be used by a person who speed reads to 'speed read' the files on the PocketPC. Tap the button to display all of the files on the PocketPC.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
Other Software by developer «No2Chem»:
nueTTY-Console nueTTY-Console - nueTTY-Console is an utility to communicate with HTC-branded Windows CE devices in bootloader mode. It uses the WinUSB library to communicate with the device. Currently only working in Windows Vista.
WARNING!!!
Some commands can damage or destroy ("brick") your device
nuePower/nueBattery nuePower/nueBattery - nuePower consists of nuePowerCPL, and a modified power driver (nueBattery) that allows you to view increasing battery power in 1% increments. The power driver is currently available for the Titan and Vogue (i.e. Sprint Mogul, Touch)
nueBattery is available for the CDMA Touch Pro and Diamond
nueAudio NueAudio is a tool for editing audiopara.csv, the file which controls internal audio parameters for HTC devices
nueLED nueLED - nueLED is a LED intermediate driver that sits between the LED driver (ALLLEDMGR) and controls which LEDS are signaled. nueLED can also redirect LED signals to another LED, for instance, the signal light to the bluetooth light. nueLED is compatible with all HTC devices that use ALLLEDMGR as the LED control driver, although the LED addresses may differ between devices
nueLight nueLight - nueLight turns your device into a versatile flashlight. nueLight uses the flash LED for the camera and can even enter high-beam mode. nueLight also has a morse code function where it will send text you type as morse code over the flash LED
nueFont NueFont is a utility that lets you adjust system fonts
nueNullKB nueNullKB - nueNullKB is a new version of nullKB which does not require ATL and supports VGA devices (i.e. the icon is not stretched out anymore).
If you want to change the icon, use a resource hacker – the first icon is a 32x32 icon for VGA devices and the second icon is a 16x16 icon for QVGA devices
nueClockViewer nueClockViewer - nueClockViewer lets you view the speed of internal clocks on msm7xxxA devices with remote client api support. These clock speeds are secondary clocks that control a number of functions ranging from I2C, Display and USB.
The meaning of each index varies from device to device, but typically index 0 = Applications Processor Datamover
nueRecMod nueRecMod - nueRecMod is an updated version of RecMod. nueRecMod recovers files from modules in the format Imgfstools outputs them in (S000, etc). It is based on RecMod by mamaich. However, this version is lighter and properly sets the imagebase, which is especially important when disassembling via IDA
nueUSBKeyboard nueUSBKeyboard - nueUSBKeyboard turns your mobile device into a real USB HID Keyboard, allowing you to use your device's keyboard (or soft keyboard) to enter text, control the BIOS, etc on your computer, or other USB Host that accepts HID Keyboards (i.e. Playstation3, XBOX360, etc.)
