LeoCpuSpeed is an app to control the speed of the CPU. Started out as a test to determine if the "1ghz hack" was genuine or not, and ended up to be able to control cpu speed and to overclock to some degree.
Notes on auto-apply speed at startup
1) Disable autoscaling
2) Select the cpu speed you want
3) Menu > Apply speed at boot
Notes on overclocking
1) Obviously overclocking is completely at your own risk, as you could harm your device. Luckily, in most cases, your device will just lock up and you'll need to restart your device (remove battery, re-insert and turn on again).
2) The green buttons were the overclock settings that have been successful 9 out of 10 times. The orange speeds have been successful like 5 out of 10 times. The red speeds have never worked for me yet.
3) The higher the speed, the more unstable. This is mainly because I don't have a way to increase voltage of the core.
4) Overclocking only works on AC power! When on battery power, the overclock will work but will be undone within 500 milliseconds by the OS. Something within the OS, or a driver, or the radio rom, enforces the proper CPU speed every 500ms.
Notes on battery
I have seen only very very miniscule differences on battery usage when using 998MHz all the time. You really wouldn't notice the difference if it were at 998MHz all the time, or at 768MHz (default). The only thing you _do_ notice, is that it feels snappier.
Try playing a decent movie in TCPMP or coreplayer with autoscaling on, and try again with autoscaling off and at 998mhz. Huge difference. (Note that some ROMs already have autoscaling disabled and will run at 998MHz all the time, like CleanEX. You won't notice a difference there obviously.)
· Updates CPU speed every half second (calculated from the processor registered directly! not from some driver)
· Can stress the CPU to show you that it goes up to 998mhz under load (when idle speed is less than 998mhz)
· Disable autoscaling so that you can control the speed yourself
· Select the speed you want by moving the slider or pressing 768/998 presets
· Automatically disable autoscaling and set speed at boot (via menu)
· Overclocking
What's New in This Release:
· For advanced users only: call LeoAutoCpuSpeed.exe with a custom performance level to set that speed (and disable autoscaling if enabled). So, calling "LeoAutoCpuSpeed 12" will set it to 768MHz. And FYI, 18 = 998MHz.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Requirements:HTC Leo
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional, Windows Mobile 6.5 Professional
Similar Software:
Sleep Suspend a Windows Mobile device, preserving power
Update for HTC Touch Diamond2 - Handwriting Update for HTC Touch Diamond2 - Handwriting - This update for HTC Touch Diamond2 lets you write the way you want to. Now in addition to the full QWERTY keypad, simulating a full physical keyboard experience, HTC Touch Diamond2 now offers handwriting recognition to give you more flexibility to send messages to your loved ones.
Copy the update, which is an
Hot fix for prolonging the time allowed to input PIN on the PIN required screen of HTC Touch Dual Hot fix for prolonging the time allowed to input PIN on the PIN required screen of HTC Touch Dual - When you insert the SIM card for the first time or when you restart the device with the PIN required process enabled, the PIN input prompt only stays active for 1 second and then disappears. If you encounter this issue, install this hot fix to resolve this problem
Kai's Mute Timer.Net Kai's Mute Timer.Net - With the Mute Timer you switch off the Speaker and/or the Phone (Flight Mode) for a certain time. After the adjusted Time everything will be automatically turned on again. Use it in the Plane, before a conference, at the doctor or overall where you do not want to disturb with telephone ringing for a while
Update for HTC Diamond2 Power LED Notification Update for HTC Diamond2 Power LED Notification - This update for the HTC Diamond2 allows you to see the battery charging status right from the LED. Now enhanced to illuminate green when fully charged, with a quick look you will know when your device is powered and ready to go.
Copy the update, which is an .exe file, to your device. To install the update, tap the
SIPChange SIPChange - SIPChange is for those who can no longer change their defaultIM using the reghacks after upgrading to AKU2.x. No matter what you choose, the keyboard SIP is always selected after a soft reset.
If you aren't having this problem, then you don't need this little app
Flash Gadgets Dozens of small gadgets for Windows Mobile
VBRegFix VBRegFix is a Freeware program that helps to keep embedded Visual Basic (eVB) programs on PocketPC’s running after another eVB program is uninstalled. This is a known and widespread problem with eVB programs created for PocketPC
Associate Associate - Associate allows you to associate certain file-types you choose with a program and icon. Thus, if certain types of files no longer run after a program has been uninstalled, you can re-associate them with another program
IBE Bar for PPC IBE Bar for PPC is a taskbar system management tool. It allows you to manage tasks, display battery and memory information. You can also quickly shutdown, restart or turn the screen off.
IBE Bar includes many advanced features, such as:
- Supports QVGA, VGA resolution, landscape, square and portrait modes
Other Software by developer «Martijn Stolk»:
LeoExtendedNotifications LeoExtendedNotifications is a small app that blinks the keypad when there are notifications.
If you also use KeypadLedControl, you may get some irregular blinking during notifications. Nothing serious
KeypadLedControl KeypadLedControl By default the keypad lights turn off after 10 seconds when the device comes out of standby. This little application keeps the light on while the display is on
TorchButton TorchButton Dropped your keys? Finding something behind the bench? Performing surgery on a computer and need to find that jumper on the mainboard?
This is a simple application built for some HTC devices that have a hardware LED, normally used to take pictures in the dark. However the LED can be used as a handy pocket flashlight
Msm7kCpuSpeed Msm7kCpuSpeed - An application for overclocking the MSM7k SoC on the Raphael. The same processor is present on the Diamond, Rhodium and the Topaz, so it should work on all of these devices. It was able to underclock to 57MHz and overclock up to 710MHz, using small 19.2MHz steps
