Lamp only displays a never-ending white screen which has no value expect that it can be used as a backup lamp. At the bottom of the screen, the battery percentage level is displayed.
No parameters, no special features - excepts that UP and DOWN buttons can be used to increase/decrease brightness. Tap on the screen to exit the application.
WARNING: if run unattended, this application can drain your mobile battery, as the device auto-off is disabled. Of course, default setting are restored when leaving the application
Like it? Share with your friends!
Supported operating systems:
Palm OS 3.x, Palm OS 4.x, Palm OS 5.x
Similar Software:
MALZ Mirror MALZ Mirror is a freeware application that turns all pixels in screen to black so the pda's screen turns into a mirror
1st Color Mirror 1st Color Mirror is the first mirror application that is adapted to color devices.
After a short test, I found out that turning all of the screen to a dark shade of gray gives better result than just a black screen. So here it is.
Color mirror turns your handheld's screen to a mirror when you don't have a real mirror nearby
Backlight On Backlight On will turn on the backlight of your m505 every time you turn your Palm on.
Backlight On differs from the "official" Palm app in several ways:
-There is never any user interface. It just works, and doesn't need to be configured.
- It is much smaller (under 1Kb).
- It turns on the backlight everytime the m505 is turned on
FlashLight FlashLight is a simple application for the Palm OS for any device with a backlight
Inmobile Lighter Inmobile Lighter - Mobile device lighter. Can you believe it?
Take it on your PALM to concerts, night clubs, parties etc.
Remember those concerts when you burnt your fingers when lighting a regular lighter? Or when the lighter didn't work? Or even when the wind used to constantly blow out your lighter?
Well, those days are over
ReDigi ReDigi - ReDigi helps you to access the digitizer screen when your pen is severely misaligned.
Calibrate after a soft reset - Normally, after a soft reset, the Prefs screen will appear. With ReDigi, the calibration screen will show after a soft reset. This allows you to calibrate the digitizer
Screen Prefs Screen Prefs sets the default screen color/gray scale depth and color scheme for your Palm OS device. It can handle screen modes from black and white (1-bit) all the way up to 16-bit color.
This program shows up in your Palm Preferences application (known as Prefs) and not in the application launcher. However, it can be configured to show up in the application launcher
Mirror/Torch Combo+ Mirror/Torch+ is a simple app that displays the entire screen black to show a reflection of yourself or it can be used as a "torch" to find items when it's dark and you have no light!
ZoomThis ZoomThis allows you to magnify portions of your handheld display. Use ZoomThis to magnify phone numbers, addresses, or any other information. ZoomThis is particularly useful when ambient light is low, and the backlight is not enough. Just tap two corners of the area you want to magnify! Works on PalmOS 3.5 or higher
PowerApp PowerApp - allows you to turn the Palm off or turn the backlight on or off by clicking on a large button.
This is ideal for those with Palm V's that no longer have function power buttons (like me)
Other Software by developer «Pierre Lescuyer»:
Polyedre by Pierre Polyedre by Pierre does nothing really useful. Pre-defined 3D grid volumes can be rotated around two axis using up / down / left / right hard buttons. This simple program was my first attempt for using Palm SDK graphic lib and hard button management.
Rotating step can be tuned through the Preferences.
This program works fine on Palm OS 3.5 and above
UmtsCrunch by Pierre UmtsCrunch by Pierre is a database for UMTS Release 5 specifications, the so-called 3rd generation telecommunication system. The Zip file contains a .PRC and a .PDB file which need to be both installed on the Palm.
The program allows any kind of search through the list of database entries.
The database only contains specification title and name
Metronome by Pierre Metronome by Pierre is a full featured electronic metronome.
Pulse volume, frequency and duration can be adjusted on a single screen.
In addition, Auto-off can be disabled (for usage over long period of time) and battery status can be displayed.
This program works fine on Palm OS 3.5 and above. Tested on the palm M and T series
QuarkBox by Pierre QuarkBox by Pierre is a simulation of particles confined in a box, to observe effect of gravity on trajectories. Up to 100 particles can be added/removed using up/down hard buttons. Gravity can be tuned as in preferences.
This program requires Palm OS 3.5 or above. Color as well as Grayscale devices are supported
