No Streak Hack - Some Palm IIIx displays have the 'streaking' problem. They tend to extend vertical lines (can be seen in the datebook month view) . Sometimes this can be adjusted by reducing the contrast using the contrast adjustment wheel.
This problem can sometimes be solved with software by changing the display refresh frequency. The PalmOS 3.1.1 upgrade and other programs cure this.
Flickering greyscale on the Palm IIIx and Handspring Visors
In order to prevent streaking, the PalmOS 3.1.1 upgrade and all later OS versions for the Palm IIIx and some old models of the Handspring Visor (not the prism or the platinum) reduce the screen refresh rate like this hack does.
Reducing the refresh rate has one major disadvantage: Greyscale pixels are generated by turning the pixels on and off very fast by the video controller. Together with the reduced screen refresh rate of the Palm IIIx and some Visors, this causes visible flicker in greyscale video modes used by some games and e.g. programs like AvantGo.
It is possible to setup nostreak to disable the anti-streaking code in these OS versions. In order to prevent flickering greyscale modes in e.g. programs like PalmBoy on the Palm IIIx and the Handspring Visor, install nostreak, start the hackmaster application, go to the nostreak setup (the small '+') and set the refresh rate to '0' and select 'enable in greyscale mode'. After that you might need to re-adjust the contrast setting, but the flickering in greyscale applications will be gone.
This disables the anti-streaking features of PalmOS and you might see streaking on your Palm IIIx or Visor after this. There is no way to reduce streaking and to avoid flickering greyscale at the same time.
What's New in This Release:
· Version 1.3 can be activated for greyscale modes separately
Like it? Share with your friends!
Requirements:HackMaster
Supported operating systems:
Palm OS 3.x, Palm OS 4.x, Palm OS 5.x
Similar Software:
Mirror+ Mirror+ turns the whole screen black, unlike other programs, and takes up just 2kb of space.
Run the program and your Palm or Visor will become an effective mirror, great for checking your teeth or fixing your hair before that big date
PDAMirror PDAMirror is a very simple app that turns you PDA Screen into a mirror.
What's New in This Release:
· Rewrote the code so that it no longer needs the AppForge Booster.
· Was also able to get it to load faster along with some other minor fixes
Backlight Combo Backlight Combo is designed to be the ultimate solution for effective use of the backlight on the recent Palm models (Palm Vx and the m50x series).
Backlight Combo consists of two separate programs that work together: Backlight Panel (BLT-Panel.prc) and Backlight Hack (BLT-hack.prc)
1st Color Mirror 1st Color Mirror is the first mirror application that is adapted to color devices.
After a short test, I found out that turning all of the screen to a dark shade of gray gives better result than just a black screen. So here it is.
Color mirror turns your handheld's screen to a mirror when you don't have a real mirror nearby
BacklightDAs BacklightDAs - instead of draining your battery because you THOUGHT you've turned off the backlight under that strong sunlight (and honestly, who can tell?) - download these DAs today!
You'll need a DA launcher to see and run these DAs once installed
Mirror Mirror - Turns your Palm screen completely black, creating a reflective surface. Great for watching over your shoulder or making sure your hair looks okay. Convenient when a real mirror isn't available. And it beats fussing with the contrast controls
AppLight Hack AppLight Hack - control the Backlight state for a specific application
PalmMirror This is a simple mirror for palm and Sony Clie
Eye Mail Eye-Mail is intended to capitalize on the bright, hi-contrast display of color Palmsto send scrolling billboard messages
Mobile25 Mobile25 is a mapping application. It was meant to be used on our geocaching trips. The maps are stored as compressed bitmaps on memory card and e.g. the 1:100.000 (TOP100) and 1:25.000 (TOP25) maps of Baden-Wurttemberg, Germany together require about 700MB of memory card space.
Mobile25 supports bluetooth GPS devices and can display the current GPS position on the map
PBrick PBrick - The PBrick library provides a API for bidirectional IR communication between the palm computing platform and the lego mindstorms RCX controller
Battery Meter Hack Battery Meter Hack - This program replaces the battery symbol in the PalmOS launcher application with a customizable symbol and an additional value. This value can be configured to display the absolute battery voltage or the battery level in percent
IR Ping IR Ping - This program allows to check the communication between a Palm III or a PalmPilot Professional with IrDA extension and other IrDA devices or another PalmPilot. The current version tries to access a IrCOMM port. This is present in most printers and Palm devices with PalmOS >= 3.3
The Grayscale Hack The Grayscale Hack - This is a utility for the Bodos PalmBoy and Phoinix Gameboy emulators. It may be useful for other applications as well.
This is a Hackmaster hack and requires the hackmaster application or a compatible replacement to be installed in order to work.
This hack allows the systems grayscale settings to be modified
Step Counter Step Counter - This program needs the tilt sensor modification to work, it uses the acceleration sensor to count your steps while walking or jogging.
Just start the step counter application and put the pilot into your pant pocket or whatever you like. The sensitivity can be adjusted to match the different accelerations while walking, jogging or running
IR Pong IR Pong - IR Pong is a two player action game for the Palm Pilot. You'll need a palm with infrared or bluetooth capabilities and a second person with a similar machine to play this game.
You can choose between nine different board layouts and adjust the level of difficulty as you get better
BlueBlocks BlueBlocks - BlueBlocks is the first real multiplayer Bluetooth game for PalmOS. It uses a so-called piconet to connect up to four palm PDAs into a bluetooth network. These four palms can then join each other in a multiplayer session of BlueBlocks.
The game has been developed and tested with a PalmOne M515 and a PalmOne Tungsten T
Argon V Argon V - Your objective is to survive as long as possible and to shoot down everything that moves. Avoid to crash into buildings, energy barriers, bombs and other ships, since this will damage you shield. Try to collect upgrades to increase the ship strength or to reduce damage
