EVDash is a Palm OS application that acts as a set of dash board gauges for electric vehicles. It displays battery pack voltage, amps being drawn from the battery pack, and two different estimates of remaining battery capacity. It works with Xantrex's Link 10, formerly called the E-Meter. Just plug the Palm device into the E-Meter, preferably through an optical isolator to protect the Palm device and start the EVDash program.
- Voltage - Battery pack voltage.
- Amps - Amps being drawn from or put back into the battery pack.
- Capacity based on voltage - Capacity calculated from the pack voltage under very low load. Voltage drops off as pack capacity drops.
- Capacity based on amps - Capacity calculated from the amps drawn integrated over time compared to the pack capacity. The peukert effect is taken into account.
Once you install the EVDash.prc on the Palm pull down the menu and go to the setup window. Enter the pack capacity and the Peukerts constant. The state of charge voltages should be determined experimentally by recording the voltages as the battery pack is completely discharged.
To transfer ASCII data from your Palm, use the standard Hot sync cable and a terminal program. Set the following communications information:
Supported operating systems:
Palm OS 3.x, Palm OS 4.x, Palm OS 5.x
Similar Software:
Keep Lit Hack Keep Lit Hack is a Hackmaster extension that will maintain the backlight state when a user's Palm handheld is turned off.
This is especially useful for m505 owners who want the backlight on nearly all of the time
DevName DevName lets your Palm/Sony device become any other Palm/Sony device!
JogDaily JogDaily - Do you remember situations when Jog-Dial navigator was not so convinient as it should be? For me the answer's "Yes", especially when the list on the screen is very long (Contacts, Programs etc). So this hack simplifies the scrolling in such cases
FlipHack FlipHack is a HackMaster hack for PalmOS that lets you rotate your screen 90, 180, and 270 degrees (and continue using your device).
There is some slowdown, but it is usable.
Released under GPL.
Source code is available from my web site.
Hoshi Takanori has released a DA to activate FlipHack from any application (using a DA launcher). It's called FlipDA
Tweak User Tweak User - Tweak User allows to operate multiple PalmOS handhelds with the same user name but synchronise them to different user accounts on the desktop application
AlwaysOn (Palm OS) AlwaysOn (Palm OS) is a simple little application that lets you change the auto-off time of your Palm to some different values than possible with the built-in preferences. Especially it is possible to disable the timer completely.
What's New in This Release:
· Added color icons, confirmed compatibility with OS 3
List Hack List Hack is a small system extension that will scroll through a standard list when the up/down buttons are pressed. I created this hack, because I found I was pressing the scroll buttons and expecting a list to scroll, and because it didn't I had to tap the to small buttons in the list itself
TealMaster TealMaster - Replace Hackmaster with TealMaster, the supercharged 100%-compatible system extensions manager. TealMaster adds enhanced stability, configuration and diagnostic features and PalmOS 5.0 hack emulation.
With numerous unique features, TealMaster sets the new standard for managing system extension programs, commonly called "hacks
mobileWATCH mobileWATCH is a watch face application, generally used on the Fossil WristPDA watch, but usable on any device with PalmOS 4 or greater. mobileWATCH solves some of the typical functional problems of the WristPDA. For instance, it allows louder alarm sounds, better control of alarm sound duration, and prevents 'phantom' alarm
TealScript Plus TealScript Plus - Graffiti Reinvented
Replace or restore Graffiti with TealScript, the text recognition system you can customize. Unlike Graffiti or other systems, TealScript lets you make or change your own strokes for better speed and accuracy
Other Software by developer «Peter Ohler»:
EV1Dash EV1Dash is a program for Palm OS devices that will collect data from the EV1 and display it on the Palm OS device display. The intent is to provide more information to the driver so that range and performance can be optimized. Here is one of the displays. There are two other displays
