ButtonChange allows you to change a physical button into another button. For example, when running AvantGo, the Date and Address button is used as the Back and Forward keys. It may be more convenient to use the ToDo and Memo buttons to navigate for a user. However, there is no way to change the buttons used in Avantgo. Now, with ButtonChange, the user will be able to change the buttons used to navigate. He can setup ButtonChange to make Memo button behaves as Date button. Thus when the Memo button is pressed, the PalmOS and Avantgo will behave as if the Date button is pressed.
Features:
Emulate another button press - You can make a button behaves as another button. This is useful in applications and games that do not allow you to configure the buttons used for controlling the apps.
Replace damaged button - ButtonChange is useful when a physical button is damaged after frequent use. You can then use another button to replace the spoilt button.
Like it? Share with your friends!
Supported operating systems:
Palm OS 3.x, Palm OS 4.x, Palm OS 5.x
Similar Software:
Icon Juxtapose Icon Juxtapose - A nice and inexpensive collection of icons for students and pen-pushers (to master time management, office work, job, study and everyday life).
The icons have been professionally hand pixeled and work well with any Palm/Sony/Tapland OS5 handheld which have a 320x320 or 320x480 screen
FAMILY ONLY Icons (lo-res) FAMILY ONLY Icons (lo-res) - an icon collection for Agendus, Datebk5, GreatDates (version 2.0), SplashID, MonthPlanner or any other app using 3rd party icons. FAMILY ONLY provides icons for active families: school, studies, after-school activities, sports, holidays, scouting, and faith
iCons3 Iconpack for IconsPlus Replace standard Palm application icons using IconsPlus in Applications(biult-in launcher), Favorites, ZLauncher, SilverScreen, WinLauncher, MegaLauncher with iCons3 icons
Clip Clip is a Command Line Interface for the Palm.
It's a lot like the Windows "Run" dialogue box, with command line completion and a memory of the last command.
It's useful if you know the name of a program but can't remember which category it was in.
Clip is not only Freeware, it is released under the GPL and is genuine Free Software
PowerBright PowerBright allows you to toggle your brightness from maximum to minimum by holding the 'Power' button for a configured time.
You may also hold the Page-Down/Up buttons too, to adjust the brightness down/up respectively - the step value and treshold are configurable for your convenience
InsertSD InsertSD - Customize the behaviour of the PDA when a card is inserted.
InsertSD is a new preference.
With it you can customize action like:
- Run or not the start.prc of the card.
- Quit or not the running application
TimeOnContrast Hack TimeOnContrast Hack - shows time, date and battery level in 'Adjust Contrast' window.
'IR receive' state is shown in the title bar and can be changed from here.
With this new feature you can enable and disable IR really fast
IconsPRC TX IconsPRC TX - Can something be easier than drawing a cube ? Yes, using IconsPRC ! With its easy interface, you will be building icons in a matter of seconds. No need to know anything about compilers, write long commands or do complicated things to build icons! Just draw and let the IconsBuilder to the rest
AutoOffExtender AutoOffExtender - AutoOff is when your device shuts itself off automatically after a specified period of user-inactivity, in order to conserve battery power.
AutoOffExtender can detect when your device is powered on after being off for less than a few seconds, and extend the auto-off time for that session, assuming you need more time to watch the screen with no action
Other Software by developer «XVisionnow»:
PhoneBackUp PhoneBackUp - Have you lost your mobile phone? Do you need to re-enter all your friends' phone numbers? Worst, have you forgot some important numbers? PhoneBackUp will remove such frustration and prevent data lost. PhoneBackUp allows you to backup your phone numbers stored in your mobile phone into your Palm using the IR port or serial port
PowerOn for Palm OS Is your battery life too short? Is it draining out too quickly? Do you want to stop unwanted power on and data corruption and lost? PowerOn is the power saver tool for you. It increases battery life by preventing unwanted power on and auto-dimming your sc
ReDigi ReDigi - ReDigi helps you to access the digitizer screen when your pen is severely misaligned.
Calibrate after a soft reset - Normally, after a soft reset, the Prefs screen will appear. With ReDigi, the calibration screen will show after a soft reset. This allows you to calibrate the digitizer
3DPong 3DPong - Enjoy the classic game "Pong" in 3D.
Features:
Highly customizable - Game colors can be customized. Many game parameters can be set to change difficulty level.
High score - Top game scores are kept for posterity.
Support any display type - Compatible with Color, Grayscale or Monochrome screen
AskiArt AskiArt(pronounced as ASK-KEY-ART) is the original palm application to display ASCII-Art. These arts can be static or dynamic. They are similar to SMS animation on your phone.
Features:
Auto-play - Automatic forwarding for playback of ascii animation.
Create with memo app - You can create as many arts as you like using the memo app
PowerOff for Palm OS PowerOff for Palm OS - Power off with a tap or any hard button. You are no longer restricted to using the power button anymore.
Features:
One tap off - Power off your Palm by tapping on the PowerOff icon.
Use any button to power off - You can also assign PowerOff to another hard button in your Prefs application
PowerOn for OS 5 PowerOn for OS 5 - Is your battery life too short? Is it draining out too quickly? Do you want to stop unwanted power on and data corruption and lost? PowerOn is the power saver tool for you. It increases battery life by preventing unwanted power on and auto-dimming your screen during inactivity
SyncNow SyncNow - Why take double the effort when it can be done with half? Currently, you will need to launch the HotSync app and then tap on the big icon button in the center of the screen to start the hotsync process. And after hotsync is done, you would need to tap Home to return to your launcher. Altogether, you need 3 pen taps
ToDo2 ToDo2 - Ever wish that you can be reminded of your To-Do tasks?
Now you can with ToDo2. You can set alarms for all your To-Do tasks.This will ensure that you do not forget about things that you need to do. ToDo2 has all the functionality of the built-in To-Do application and more!
ToDo2 features include:
Alarms
AutoDigi for Palm OS Does your palm's digitizer get misaligned frequently? Do you need to re-calibrate your digitizer repeatedly? Does your digitizer fail after a reset? AutoDigi is the complete solution to your digitizer woe
