EVDash is a Palm OS application that acts as a set of dash board gauges for electric vehicles. It displays battery pack voltage, amps being drawn from the battery pack, and two different estimates of remaining battery capacity. It works with Xantrex's Link 10, formerly called the E-Meter. Just plug the Palm device into the E-Meter, preferably through an optical isolator to protect the Palm device and start the EVDash program.
- Voltage - Battery pack voltage.
- Amps - Amps being drawn from or put back into the battery pack.
- Capacity based on voltage - Capacity calculated from the pack voltage under very low load. Voltage drops off as pack capacity drops.
- Capacity based on amps - Capacity calculated from the amps drawn integrated over time compared to the pack capacity. The peukert effect is taken into account.
Once you install the EVDash.prc on the Palm pull down the menu and go to the setup window. Enter the pack capacity and the Peukerts constant. The state of charge voltages should be determined experimentally by recording the voltages as the battery pack is completely discharged.
To transfer ASCII data from your Palm, use the standard Hot sync cable and a terminal program. Set the following communications information:
Supported operating systems:
Palm OS 3.x, Palm OS 4.x, Palm OS 5.x
Similar Software:
TX Tweak TX Tweak is a small utility that improves navigation for owners of Palm's T|X model of PDA's. The 'Find' toolbar button and 'Home' hardware button can be remapped to launch other applications to provide a navigational behavior similar to other Palm based devices that have a DIA (Dynamic Input Area)
PButton If the device is switched off for at least the preset time then selected application is launched after next powering up using power button
Alarm Repeater Hack Alarm Repeater Hack is a HackMaster hack for PalmOS version 1.0 and version 2.0 that lets you repeat your alarm sound a given number of times.
This is useful because the PalmPilot speaker tends to be on the quiet side. If you keep your device in your pocket, you may not even hear the alarm. By making the alarm repeat longer, there's a better chance that you'll hear it
EVPlugBase EVPlugBase is a hack controller that has long been an extremely popular alternative to Hackmaster as a means of controlling hacks
One Click Clipping One Click Clipping is a small enhancement to Palm Query Application technology. A normal Palm Query Application (PQA) requires some sort of user interaction before the clipping is served. This interaction can be as advanced as filling out a form to as simple as clicking one link. This last case is a click too much - One Click Clipping addresses this
AlwaysOn (Palm OS) AlwaysOn (Palm OS) is a simple little application that lets you change the auto-off time of your Palm to some different values than possible with the built-in preferences. Especially it is possible to disable the timer completely.
What's New in This Release:
· Added color icons, confirmed compatibility with OS 3
PalmBuzzer PalmBuzzer allows you to set sound to the 4 hardware buttons, to letters and numbers and to add a picture on top of the window.
These are the naming rules at the moment:
Every file needs to be a WAVE audio file and stored in /PALM/Programs/PalmBuzzer/
* for the 16 on-screen buttons: Test1.wav to Test16.wav
* for the 4 hardware buttons: Hard1.wav to Hard4
YAHM (Yet Another Hack Manager) YAHM - Yet Another Hack Manager. It is a control utility for so called 'hacks' management: activating, deactivating, beaming and deleting. YAHM presents my favorite feature set for hack manager
SysSndWavHack Plays wav files in place of lame system midi sounds. Only for TRGpro and HandEra 330!
Other Software by developer «Peter Ohler»:
EV1Dash EV1Dash is a program for Palm OS devices that will collect data from the EV1 and display it on the Palm OS device display. The intent is to provide more information to the driver so that range and performance can be optimized. Here is one of the displays. There are two other displays
