WifFi is a scanner for locating wireless Access Points (APs) using your WiFi enabled Palm OS device.
Installation
Download WifFi.
Install WifFi on your device
Start the scan and walk/jog/drive around searching for access points.
Like it? Share with your friends!
Supported operating systems:
Palm OS 5.x
Similar Software:
BtSerial BtSerial is a tool which helps you improve the connectivity of your Palm device at the moment you connect, via Bluetooth, to other devices like phones, laptops etc.
BtSerial Pro uses the Bluetooth Serial Port Profile (SPP) to connect to other Bluetooth devices. After discovering the device, they establish a L2CAP, then RFCOMM connection to it
WiFiTalkie WiFiTalkie - turns your Palm into a Walkie-Talkie. Using a broadband network connection (such as WiFi) it lets you communicate between 2 or more Palm devices. WiFiTalkie uses VoIP (Voice over IP) technology to broadcast audio data.
Requires two or more Palm OS 5 devices with a broadband network connection. Devices must be connected to the same network (e.g
Pocketerm II Pocketerm II is a VT100 terminal emulator
BTClass BTClass allows you to change the Bluetooth Device Class of your Bluetooth enabled Palm OS device. Thru this you can make your Palm look like a printer or a PC.
Also works on non Bluetooth Palm devices - provides a nice reference for the Bluetooth Device Classes
BtServer BtServer - uses Palm's Bluetooth virtual serial driver to communicate with other Bluetooth devices that support the Serial Port Profile.
It opens the Bluetooth virtual serial driver in server mode. This creates an RFCOMM listening socket and an SDP entry that advertises the Serial Port Profile
TriConnect TriConnect is a freeware program for communicating through Bluetooth, TCP/IP and Serial line.
It can both establish outgoing and listen for incoming connections. The program uses the TriComm C++ library to provide these features.
For wireless communications, the Bluetooth Serial Port Profile is used
USB-2-IR USB-2-IR is a repeater between the USB and the infrared port of a Visor.
It sends all data it gets on one port to the other.
The infrared port can be used in IrCOMM mode or in the raw SIR mode.
Therefore you are able to connect your computer via USB to to an IrDA device like cell phones or a GPS
Tools for Treo Tools for Treo is a collection of 3 usefull applications for your Palm OS Treo smartphone: BT On, BT Off and Phone Disconnect.
BTOn A small free app which switches on Bluetooth when launched.
PhoneDisconnect A small free app which does 2 things:
- Signals you with a small tune when the other side hung up a call
Nemerix BT GPS Nemerix BT GPS- simple application that replicates some of the configuration functions of the RCT (Receiver Control Tool) PC application so that the GPS receiver may be configured from a Palm device.
After making the Bluetooth connection to the GPS, the user can perform Factory, Cold, Warm and/or Hot resets
SimpleWire SimpleWire - A wireless communication conduit, SimpleWire is the only interface capable of messaging across all wireless networks.
Hundreds of competing paging networks across the world have brought more than a fistful of solutions which have caused inconsistent messaging protocols
Comments on WifFi:
javed:
how it work?
Date: 31 Jul 10
R Pex:
Very good
Date: 2 Feb 17
If you noted an error or download link is broken, please, report it via this page or use comments.
Please, select device to check if WifFi supports it